TRAINING / EDUCATIONAL

Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing / Wiring language. Besides easy-to-use hardware and software interface, Arduino is designed to be as flexible as possible to fit your project's needs.

MTS-100

View

TRAINING & EDUCATION SYSTEMS

KL-800 Autotronics/Automotion Training System

Interactive Computerized Automotive System The whole system has been modularized to provide electronic and automotive courses with step-by-step experiments on educational technology training.All theoretical, experimental and practical learning procedures are supported by personal computer assisted supervision and dedicated software.The KL-800 can simulate...

KL-800

View

ETS-7000B Digital-Analog Electronics Training System

TRAINING & EDUCATION SYSTEMS

ETS-7000B Digital-Analog Electronics Training System

Electronic Training Equipment & Breadboard/Accessories The ETS-7000B Digital-Analog Training System is designed for the beginners to enhance the comprehension of digital and analog theory.The design of Digital-Analog Training System is easy to operate and easy to understand. ► CE marking

ETS-7000B

View

ETS-5000 Advanced Digital Electronics Training System

TRAINING & EDUCATION SYSTEMS

ETS-5000 Advanced Digital Electronics Training System

DISCONTINUED The ETS-5000 Advanced Digital Training System is designed for the beginners to enhance the comprehension of advance digital theory.The design of Advanced Digital Training System is easy to operate and easy to understand. ► CE marking

ETS-5000

View

TRAINING & EDUCATION SYSTEMS

KL-900A Basic Communication System for Analog & Digital Telecommuncation

KL-900A

BASIC COMMUNICATION SYSTEM - for educational teaching, training, and learning of analog & digital telecommuncation / AM / FM / DSBSC / ASk / FSK / PSK / QPSK / CVSD / TDM / FDM / PWM / Manchester

View

TRAINING & EDUCATION SYSTEMS

KL-500 Industrial Electronic Trainer

KL-500

The KL-500 Industrial Electronic Trainer is a self-contained training equipment allowing students to learn more than 70 experiments through a power supply unit and 16 replaceable modules.

View

KL-600 Advanced Sensor Experimental System

TRAINING & EDUCATION SYSTEMS

KL-600 Advanced Sensor Experimental System

The KL-600 Advanced Sensor Training System is a comprehensive sensor / transducer control training system that incorporates industrial-grade components with various control circuits and load units. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications.

KL-600

View

TRAINING & EDUCATION SYSTEMS

KL-620 Basic Sensor Experimental Lab

The KL-620 Basic Sensor Experimental Lab is a comprehensive sensor / transducer control training system. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications.

KL-620

View

TRAINING & EDUCATION SYSTEMS

KL-630 MEMS Training System

MEMS (Micro-electromechanical Systems) based sensors such as accelerometer, gyroscope and magnetometer, are crucial components used in smart portable devices, such as smart phone and tablet PC. The demand of MEMS sensors has been increased dramatically and identified as one of the most promising technologies nowadays. CE approved

KL-630

View

TRAINING & EDUCATION SYSTEMS

ACS-1000 Analog Control System

ACS-1000, covered with many technical disciplines, explicates the central significance of Analog Control System. This applies particularly in mechanical and electrical engineering, and as well in production and process technology. It is indispensable to plant and system technology.

ACS-1000

View

TRAINING & EDUCATION SYSTEMS

ITS-200series IPv6 Training System

Explosive growth in network device diversity and mobile communications, along with global adoption of networking technologies, have overwhelmed IPv4 and have driven the development of a next-generation Internet Protocol (IPv6).

ITS-200series

View

TRAINING & EDUCATION SYSTEMS

MTS-887 PIC16F Training Lab

MTS-887. PIC16F Training Lab which uses Microchip's PIC16F887 is a 8-bit microcontroller to implement various I/O control experiments. This controller contains most of the powerful functions in modern MCUs nowadays.

MTS-887

View

TRAINING & EDUCATION SYSTEMS

LV-200 LabVIEW I/O Interface Lab

LV-200 LabVIEW I /O Interface Lab is a platform of hardware / software development. It offers a variety of I /O and peripheral devices used in real life and adopts National Instruments LabVIEW (G programming language) as development software.

LV-200

View

TRAINING & EDUCATION SYSTEMS

CIC-800A Interface Lab

An interface is a hardware and software data transmission regulator that controls data exchange between the PC and other peripheral devices, including RS-232C, AT-BUS, IDE, SCSI, ISA, PCI, AGP, IrDA, GPIB, USB, IEEE-1394, Wireless etc...

CIC-800A

View

TRAINING & EDUCATION SYSTEMS

CI-33001C CPLD / FPGA Prototyping Board

CI-33001C

View

TRAINING & EDUCATION SYSTEMS

CI-33004 CPLD / FPGA Experiment Board

CI-33004

View

TRAINING & EDUCATION SYSTEMS

CIC-310 CPLD / FPGA Development System

CIC-310 CPLD/FPGA Development System is self-contained system, which contains stabilized DC power supplies, Development Board , and Experiment Board. CIC-310 also provides digital system designers for hardware verification which enables students to learn digital system design efficiently.

CIC-310

View

CIC-560 Advanced FPGA Development System

TRAINING & EDUCATION SYSTEMS

CIC-560 Advanced FPGA Development System

CIC-560 training system is designed based on the latest digital technology in conjunction with EDA experimental teaching material. This training system consists of FPGA chip with higher logic elements and large number of pins. Therefore, students are able to develop, implement and verify design of basic or advanced digital circuit, digital signal...

CIC-560

View

CIC-500 DSP Development and Experiment System

TRAINING & EDUCATION SYSTEMS

CIC-500 DSP Development and Experiment System

CIC-500

CIC-500 is a DSP development system designed for learning DSP hardware implementations. The system combines both DSP chip for signal processing and FPGA chip for I/O control.

View

TRAINING & EDUCATION SYSTEMS

CIC-910A PSoC Training Lab

Simple, Easy, Fast, and Fun PSoC (Programmable System on a Chip) is one of the most innovative technologies nowadays. Instead of adopting a traditional MCU with fixed peripherals, or designing a circuit with discrete analog and digital components, the designer can select a single off-the-shelf PSoC on a complete project for mixed-signal...

CIC-910A

View

KR-101 Refrigerator Model Training System

TRAINING & EDUCATION SYSTEMS

KR-101 Refrigerator Model Training System

KR-101 completely places all essential refrigerator components on the front panel of the system. Only when students understand the operation principal of the refrigerator they can connect the components correctly.

KR-101

View

TRAINING & EDUCATION SYSTEMS

KR-102 Refrigerator Training System

KR-102

The design principle of KR-102 is to train students the refrigerator circuit, system processing, welding copper tube, and other related skills.

View

TRAINING & EDUCATION SYSTEMS

KR-112 Mini Ice Plant Training System

KR-112

Modern mini ice plant system, an ideal solution to understand the different freezing methods(ex: ice transparency) relative to industrial level. (Air compressor is optional and locally prepared)

View

KR-212 Single-Split Type Cooling / Heating Air Conditioner Training System

TRAINING & EDUCATION SYSTEMS

KR-212 Single-Split Type Cooling / Heating Air Conditioner Training System

Due to its lower level of indoor noise and high flexibility of installation, Split Type Air Conditioner becomes more and more popular in nowadays. KR-212 itself is a real split type air conditioner especially designed for teaching purpose. Both indoor and outdoor units are installed on the demonstration stand so students can learn the operating principle...

KR-212

View

KR-351 Chilled Water Refrigeration System Control Trainer

TRAINING & EDUCATION SYSTEMS

KR-351 Chilled Water Refrigeration System Control Trainer

► KR-351 is a Chilled Water Refrigeration System Control Trainer.► Mounted with commonly-used control components of chilled waterunit on the panel, it helps students to learn complete controlcircuits and to test their own designed circuits.

KR-351

View

TRAINING & EDUCATION SYSTEMS

KL-200 Laboratory for Electronic Experiments with Linear Circuits (2)

KL-200

The KL-200 Linear Circuit Lab(2) - Electronic Circuits Lab is a comprehensive and self-contained system suitable for anyone engaged in electronic circuit experiments.

View

TRAINING & EDUCATION SYSTEMS

PS-1000 Pneumatic Training System

The “PS-1000” is launched to offer enriched knowledge from basic air pressure components, advanced air-pressure loop design to PLC-based electrical control system. The trainee can prepare themselves to be a high-level automation engineer with the help of the “PS-1000” trainer system.

PS-1000

View

MS-6200 Mechatronics Training System (for PLC-200)

TRAINING & EDUCATION SYSTEMS

MS-6200 Mechatronics Training System (for PLC-200)

The Modular Production System stations allow various simulations of real production processes that exist in industrial field. The system is universal, industry-based, modular and flexible for further expansion. Students can learn the entire process of production, such as feeding, processing, etc.

MS-6200

View

MS-6600 Mechatronics Training System (for PLC-310)

TRAINING & EDUCATION SYSTEMS

MS-6600 Mechatronics Training System (for PLC-310)

MS-6600

View

MS-7200 Portable Mechatronics Training System (for PLC-200)

TRAINING & EDUCATION SYSTEMS

MS-7200 Portable Mechatronics Training System (for PLC-200)

MS-7200 contains two independent mechatronics training modules. They are an automatic sorting robot and a linear positioner. These two modules can be controlled by our unit PLC-200 directly or by other PLC systems through its digital input and output ports on the control panel.Each model provides at least ten training courses, beginning from learning the...

MS-7200

View

MS-7400 Portable Mechatronics Training System (for MCU)

TRAINING & EDUCATION SYSTEMS

MS-7400 Portable Mechatronics Training System (for MCU)

MS-7400 provides two independent mechatronics training modules. They are automatic sorting robot and linear positioner. These two modules can be controlled by MS-C100 directly or other microcontrollers through its digital input and output ports on control panel.

MS-7400

View

MS-7600 Portable Mechatronics Training System (for PLC-310)

TRAINING & EDUCATION SYSTEMS

MS-7600 Portable Mechatronics Training System (for PLC-310)

MS-7600 contains two independent mechatronics training modules. They are automatic sorting robot and linear positioner. These two modules can be controlled by PLC-310 directly or other PLC systems through its digital input and output ports on control panel.

MS-7600

View

CHLOROPHYLL CONCENTRATION

SPAD 502 Plus Chlorophyll Meter

Spectrum Technologies

SPAD 502 Plus

€3,650.00

TRAINING & EDUCATION SYSTEMS

NGT-501 Bubble Maker

NGT-501

faya - nugget Creative InnovationNot sure where to start with faya - nugget?With our mini projects, you can build your own Brick interactive device with faya - nugget!

View

TRAINING & EDUCATION SYSTEMS

NGT-502 Digital Piano

NGT-502

faya - nugget Creative InnovationNot sure where to start with faya - nugget?With our mini projects, you can build your own Brick interactive device with faya - nugget!

View

TRAINING & EDUCATION SYSTEMS

NGT-503 2-in-1 Remote Bot

NGT-503

faya - nugget Creative InnovationNot sure where to start with faya - nugget?With our mini projects, you can build your own Brick interactive device with faya - nugget!

View

TRAINING & EDUCATION SYSTEMS

NGT-504 Scratch for Arduino

NGT-504

faya - nugget Creative InnovationNot sure where to start with faya - nugget?With our mini projects, you can build your own Brick interactive device with faya - nugget!

View

EM-3360 AC Induction Motor Winding Training System

TRAINING & EDUCATION SYSTEMS

EM-3360 AC Induction Motor Winding Training System

EM-3360 AC Induction Motor Winding Training System can be configured for various poles as the self-starting three-phase induction motor and single-phase induction motor which is used with the resistor or capacitor starting.

EM-3360

View

EM-3350 Cutaway Model of Electrical Machine

TRAINING & EDUCATION SYSTEMS

EM-3350 Cutaway Model of Electrical Machine

Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entire length for an optimum view of the internal construction of the machine and it is still operating. The cutaway surfaces are protected against corrosion.

EM-3350

View

TRAINING & EDUCATION SYSTEMS

KH-LPT80 Portable Interactive Device

Compatible with a projector, KH-LPT80 makes a display interactive and brings smooth writing and drawing experience to the new display area.- Adjustable and portable- For 46"~80" display- Easy installation and quick calibration※ Best solution is supported by a short throw projector.※ The whiteboard and projector are not included.

KH-LPT80

View

TB-1102 Training Bench (2 x BTC-11001 Bench Top Console + WTA-36 Working Table)

TRAINING & EDUCATION SYSTEMS

TB-1102 Training Bench (2 x BTC-11001 Bench Top Console + WTA-36 Working Table)

The Training Bank consists of: 2 x BTC-11001 Bench Top Console + WTA-36 Working Table - The Bench Top Console BTC-11001 is composed of: - BTC-10001 Three-phase power supply. - BTC-10002 AC Variable power supply. - BTC-10003 Function Generator Direct Digital Synthesizer (DDS) and DC power supply

TB-1102

View

TB-1101 Training Bench (BTC-11001 Bench Top Console + WTA-36 Working Table)

TRAINING & EDUCATION SYSTEMS

TB-1101 Training Bench (BTC-11001 Bench Top Console + WTA-36 Working Table)

The Training Bank consists of: BTC-11001 Bench Top Console + WTA-36 Working Table - The Bench Top Console BTC-11001 is composed of: - BTC-10001 Three-phase power supply. - BTC-10002 AC Variable power supply. - BTC-10003 Function Generator Direct Digital Synthesizer (DDS) and DC power supply

TB-1101

View

TB-1103 Training Bench (BTC-11001 Bench Top Console + EM-3380-1B Working Table)

TRAINING & EDUCATION SYSTEMS

TB-1103 Training Bench (BTC-11001 Bench Top Console + EM-3380-1B Working Table)

The Training Bank consists of: BTC-11001 Bench Top Console + EM-3380-1B Working Table - The Bench Top Console BTC-11001 is composed of: - BTC-10001 Three-phase power supply. - BTC-10002 AC Variable power supply. - BTC-10003 Function Generator Direct Digital Synthesizer (DDS) and DC power supply

TB-1103

View

TB-1104 Training Bench (2 x BTC-11001 Bench Top Console + EM-3380-1B Working Table)

TRAINING & EDUCATION SYSTEMS

TB-1104 Training Bench (2 x BTC-11001 Bench Top Console + EM-3380-1B Working Table)

The Training Bank consists of: 2 x BTC-11001 Bench Top Console + EM-3380-1B Working Table - The Bench Top Console BTC-11001 is composed of: - BTC-10001 Three-phase power supply. - BTC-10002 AC Variable power supply. - BTC-10003 Function Generator Direct Digital Synthesizer (DDS) and DC power supply

TB-1104

View

PSB-01 AC/DC Power Supply for Breadboard

TRAINING & EDUCATION SYSTEMS

PSB-01 AC/DC Power Supply for Breadboard

PSB-01

Regulated with short-circuit protection power supply 1. Power switch with lamp2. Just plug in and start to use3. Compact and lightweight4. For both digital / analog circuits

View

TRAINING & EDUCATION SYSTEMS

MB-85 Multi-Board

MB-85

Multi-board MB-85 1. Easy and fast prototyping with surface mount chip carriers2. Eliminates time-consuming soldering3. Compatible with K&H solderless breadboard

View

TRAINING & EDUCATION SYSTEMS

LA-60 Breadboard for Brick, Arduino

LA-60

View

TRAINING & EDUCATION SYSTEMS

LP-2001 Logic Pulser

LP-2001

01. For TTL, DTL, RTL, HTL, CMOS and MOS 02. Producing 10μs pulse signal03. Overload protection04. Output current up to 100mA (pulse)

View

TRAINING & EDUCATION SYSTEMS

LP-1001 Logic Probe

LP-1001

01. Testing TTL, DTL, HTL, CMOS and MOS02. Displaying pulse presence and logic states03. Catching pulse to 10ns or pulse trains to 50MHz 04. Input overvoltage protection LP-1001 isn’t CE marked.

View

TRAINING & EDUCATION SYSTEMS

LP-2800 Logic Probe

LP-2800

View

TRAINING & EDUCATION SYSTEMS

LP-3500 Logic Probe

LP-3500

View

TRAINING & EDUCATION SYSTEMS

LP-540H Logic Pulser

The K&H LP-540H logic pulser is a very effective tool for inspecting and repairing logic circuits. It can directly inject a signal into the logic circuits neither removing the IC nor breaking the circuits.

LP-540H

View

TRAINING & EDUCATION SYSTEMS

DT-01 Digital Trainer

With breadboard, digital circuits, flip - flops and monostable multivibrators, counters, encoders, decoders, multiplexers, demultiplexers and sequencers, resistor, LED, 7 segments LED displays and memory devices, etc..

DT-01

View

TRAINING & EDUCATION SYSTEMS

IDL-800A Digital Lab

IDL-800A

The IDL-800A Digital Lab is designed for the beginners to enhance the comprehension of digital theory.The user-friendly design makes beginners understand logic gates more easily.

View

TRAINING & EDUCATION SYSTEMS

IDL-600A Analog Lab

IDL-600A

The IDL-600A logic trainer is designed for the beginners to enhance the comprehension of analog theory.The user-friendly design makes beginners understand logic gates more easily.

View

TRAINING & EDUCATION SYSTEMS

IDL-400 Logic Trainer

IDL-400

It is equipped with various kinds of basic logic gates, debounced logic switches, LED indicators, DC power supply with short circuit protection, pulse generator and a solderless breadboard.

View

Converters

SSE Anticipator Supply for External Sensors

With its independent battery or input for external battery, it feeds other sensors that have a high power consumption or that need to be fed several seconds to stabilize the measurement before the measurement of the Data Logger.

SSE

€120.00

TRAINING & EDUCATION SYSTEMS

PP-272 Power Project Board

PP-272

The PP-272 Power Project Board with prototyping breadboard, power supplies.

View

TRAINING & EDUCATION SYSTEMS

PBU-312 Circuit Lab

PBU-312

The PBU-312 Circuit Lab, with prototyping breadboard, power supplies and an universal connector (UC series) as connections environment, is a low cost but ideal tool for learning.

View

TRAINING & EDUCATION SYSTEMS

ICP-20 IC Puller

ICP-20

IC Tools

View

TRAINING & EDUCATION SYSTEMS

ICS-01 IC Straightener

ICS-01

IC Tools

View

TRAINING & EDUCATION SYSTEMS

PB-16 DIP IC Extractor

PB-16

IC Tools

View

TRAINING & EDUCATION SYSTEMS

GX-8 PLCC Extractor

GX-8

IC Tools

View

TRAINING & EDUCATION SYSTEMS

ITC-14A 14 Pin IC Test Clip

ITC-14A

IC Test Clips

View

TRAINING & EDUCATION SYSTEMS

ITC-16A 16 Pin IC Test Clip

ITC-16A

IC Test Clips

View

TRAINING & EDUCATION SYSTEMS

ITC-20A 20 Pin IC Test Clip

ITC-20A

IC Test Clips

View

TRAINING & EDUCATION SYSTEMS

ITC-28A 28 Pin IC Test Clip

ITC-28A

IC Test Clips

View

TRAINING & EDUCATION SYSTEMS

ITC-36A 36 Pin IC Test Clip

ITC-36A

IC Test Clips

View

TRAINING & EDUCATION SYSTEMS

ITC-40A 40 Pin IC Test Clip

ITC-40A

IC Test Clips

View

TRAINING & EDUCATION SYSTEMS

ITC-48A 48 Pin IC Test Clip

ITC-48A

IC Test Clips

View

Training System for Engines and Electric Machines

Training System for Engines and Electric Machines 2

TRAINING & EDUCATION SYSTEMS

EM-3350 Electrical Machines & Motors Training System

CE CERTIFIED Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entirelength for an optimum view of the internal construction of the machine and it is still operating. The cutawaysurfaces are protected against corrosion. An attached pdf shows the EM-3350 cutaway motor models

EM-3350

View

SPECTROMETERS & SPECTRO-RADIOMETERS

StellarCASE-NIR Portable Material IDentifier & Composition Analyzer

StellarCASE-NIR System Overview: Easily analyze composition of solids, liquids, powders, and pellets Instantaneous, real-time results Rugged and portable for field, at line, or laboratory applications Simple to use with little to no sample preparation required Affordable and accurate solution for your application

StellarCASE-NIR

View

StellarCASE-LIBS Analyzer Portable Elemental Analysis

SPECTROMETERS & SPECTRO-RADIOMETERS

StellarCASE-LIBS Analyzer Portable Elemental Analysis

StellarCASE-LIBS System Overview- Portable Laser Induced Breakdown Spectroscopy (LIBS) System- The StellarCASE-LIBS includes interior mounting of spectrometer instrumentation pre-configured with no additional setup required- Internal main power control system with ON, OFF, & Charge buttons and an 8 hour battery life for portable field applications-...

StellarCASE-LIBS

View

StellarCASE-Raman Analyzer Portable Raman System for Material ID and Raman Spectroscopy

SPECTROMETERS & SPECTRO-RADIOMETERS

StellarCASE-Raman Analyzer Portable Raman System for Material ID and Raman Spectroscopy

StellarCASE-Raman Analyzer Overview:- Rugged Case Raman System for “Open & Measure” Applications- Systems include a high performance Raman spectrometer, High power Laser, and vial holder- SpectraWiz ID Raman Library with Save/Search functionality included FREE. Save your samples and then search for matches!- The StellarCASE-Raman includes interior...

StellarCASE-Raman

View

INSIDE & OUTSIDE USE

UA-004-64 Triaxial Economic Data Logger for Aceleration & Inclination

UA-004-64

€120.00

Triaxial Economic HOBO Pendant "G" Data Logger for Aceleration & Inclination

Nvis 5001A Techbook for 8051 Universal Development Platform

TRAINING & EDUCATION SYSTEMS

Nvis 5001A Techbook for 8051 Universal Development Platform

Nvis 5001A Techbook for 8051 Universal Development Platform is a full-featured development system for 8051 microcontrollers. It is an ideal platform to implement and test the designs both for the beginners and the experts. The Nvis 5001A comes with 20 Keys Hex keypad with 16x2 LCD for user programming mode.

Nvis5001A

View

Nvis 5002 Techbook for PIC Microcontroller Development Platform

TRAINING & EDUCATION SYSTEMS

Nvis 5002 Techbook for PIC Microcontroller Development Platform

The Nvis 5002 Techbook for PIC Microcontroller Development Platform is a convenient way to teach the principles of the family of microcontrollers through to programming and interfacing on the 16 series device. Using the platform, a range of projects in various domains like telecommunication, robotics, consumer electronics etc can be done.

Nvis5002

View

Nvis 5003 Techbook for AVR Microcontroller Development Platform

TRAINING & EDUCATION SYSTEMS

Nvis 5003 Techbook for AVR Microcontroller Development Platform

Nvis 5003 Techbook for AVR Microcontroller Development Platform is a full featured development system for AVR ATMEGA8515 microcontroller. It is an ideal platform to implement and test the designs both for the beginners and the experts. The Nvis 5003 is a convenient way to teach the principles of the family of microcontrollers through to programming and...

Nvis5003

View

Nvis 5005 Techbook for 16-Bit Development Platform

TRAINING & EDUCATION SYSTEMS

Nvis 5005 Techbook for 16-Bit Development Platform

Nvis 5005 provides a perfect hardware and software platform to start the application development in no span of time and makes learning microcontroller a fun. Nvis 5005 allows users to evaluate, prototype and create application specific designs.

Nvis5005

View

Nvis 5585A Techbook for Advanced 8085 Microprocessor Trainer

TRAINING & EDUCATION SYSTEMS

Nvis 5585A Techbook for Advanced 8085 Microprocessor Trainer

Nvis 5585A is a 8085 Microprocessor based product designed to teach students about 8085 architecture and its programmingtechniques. Nvis5585A provides a very simple and user friendly platform for students so they can learn about 8085 Microprocessor architecture and implement their own ideas with different peripherals provided on board. Practical...

Nvis5585A

View

Nvis 5585 8085 Microprocessor Trainer Platform

TRAINING & EDUCATION SYSTEMS

Nvis 5585 8085 Microprocessor Trainer Platform

Nvis 5585 is a 8085 Microprocessor Trainer Platform provides an understanding of INTEL 8085 Microprocessor architecture. Nvis 5585 explains the fundamental concepts of Microprocessor based systems. Students can learn Programming and Interfacing of different peripherals of 8085 Microprocessor in an easy manner.

Nvis5585

View

Nvis 22D Nvisduino (Ardunio Compatible) Platform

TRAINING & EDUCATION SYSTEMS

Nvis 22D Nvisduino (Ardunio Compatible) Platform

Nvis 22D Nvisduino is a full featured development platform for ATmega168 microcontrollers. The Nvis 22D is a convenient way to teach the principles of the Arduino & the family of AVR microcontrollers through programming and interfacing on the ATmega168 device. It is an ideal platform to implement and test the designs both for the beginners and the...

Nvis22D

View

Nvis 35D Nvisduino Based ZigBee Development Platform

TRAINING & EDUCATION SYSTEMS

Nvis 35D Nvisduino Based ZigBee Development Platform

Nvis 35D Nvisduino based ZigBee Development Platform is a full featured development platform for ATmega328P microcontroller. This platform is a convenient way to teach the principles of the Arduino, Xbee & the family of AVR microcontrollers through programming and interfacing on the ATmega328P device.

Nvis35D

View

TRAINING & EDUCATION SYSTEMS

Nvis 5000P Handheld 8051 USB Programmer

Handheld 8051 USB Programmer Nvis 5000P is a fully USB programmer for ATMEL 89 series. It is a full featured programmer for most common 8051 microcontrollers. The Programmer works on USB port and can be used with PC and Laptops. It comes with programmer software which allows user to perform various commands like read signature, read/write, verify and lock...

Nvis5000P

View

TRAINING & EDUCATION SYSTEMS

Nvis 5002P Compact PIC USB Programmer

Compact PIC USB Programmer Nvis 5002P is designed for Microchip PIC10F/12F/16F/18F series microcontroller with full featured USB in-circuit serial programmer (ICSP). This USB Programmer will easily connect with PC & laptops. It comes with programmer software which allows user to perform various commands like Read, Erase, Write, Verify, Blank check.

Nvis5002P

View

TRAINING & EDUCATION SYSTEMS

Nvis 5003P Compact AVR USB Programmer

Compact AVR USB Programmer Nvis 5003P is designed for ATMEL ATmega, Tiny & AT90 series Microcontroller. It is a full featured USB in-circuit programmer for Atmel AVR Microcontrollers. This USB programmer will easily connect with PC and laptops. It comes with Programmer Software which allows user to perform various commands like Read chip signature,...

Nvis5003P

View

TRAINING & EDUCATION SYSTEMS

MC20RFID RFID Card Reader Module

MC20RFID RFID Card Reader Module is an extension module for Nvis Microcontroller development platforms. The module has been designed for students and practicing engineers to gain invaluable practical experience on the principle and applications of microcontroller & RFID card reader. The objective is to have a clear understanding of how RFID card...

MC20RFID

View

TRAINING & EDUCATION SYSTEMS

MC20ZB Zigbee Module

MC20ZB Zigbee Module is an extension module for Nvis Microcontroller development platforms. The module has been designed for students and practicing engineers to gain invaluable practical experience on the principle and applications of microcontroller & Zigbee module. The objective is to have a clear understanding of how Zigbee module is interfaced...

MC20ZB

View

TRAINING & EDUCATION SYSTEMS

MC20FP Finger Print Module

MC20FP Finger Print Module is an extension module for Nvis Microcontroller development platforms. The module has been designed for students and practicing engineers to gain invaluable practical experience on the principle and applications of microcontroller & Finger print module. The objective is to have a clear understanding of how Finger print...

MC20FP

View

MC20GPS GPS Module for Embedded Platforms

TRAINING & EDUCATION SYSTEMS

MC20GPS GPS Module for Embedded Platforms

MC20GPS GPS Module for Embedded Platforms is an extension module for Nvis Microcontroller development platforms. The module has been designed for students and practicing engineers to gain invaluable practical experience on the principle and applications of microcontroller & GPS Module. The objective is to have a clear understanding of how GPS module...

MC20GPS

View

TRAINING & EDUCATION SYSTEMS

MC20GSM Study of GSM Application Module

MC20GSM Study of GSM Application Module is built with Dual Band GSM/GPRS engine, and works on 900/ 1800 MHz. The Modem comes with RS232 and USB interface, which allows the user to connect PC as well as microcontroller with UART Interface. The GSM/GPRS Modem has internal TCP/IP stack to enable the user to connect with internet via GPRS. It is suitable for...

MC20GSM

View

TRAINING & EDUCATION SYSTEMS

MC01 Input Interface Module

MC01 Input Interface Module is an extension module for Nvis Microcontroller development platforms. The module has been designed for students and practicing engineers to gain invaluable practical experience on the principle and applications of microcontroller. The object is to have a clear understanding of how input peripherals are interfaced and...

MC01

View

TRAINING & EDUCATION SYSTEMS

MC02 ADC/DAC Module

MC02 ADC/DAC Module enables the students and practicing engineers to gain invaluable practical experience on the principles and applications of microcontroller. The object is to have a clear understanding of how analog inputs are converted into digital through Microcontrollers and vice versa. ADC/DAC module, MC02 has inputs and outputs terminals for...

MC02

View

TRAINING & EDUCATION SYSTEMS

MC03 Computer Interface Module

MC03 Computer Interface Module is an extension module for Nvis Microcontroller development platforms. The module has been designed to have a clear understanding of how serial port and USB port interfaced devices are controlled and interfaced with Microcontroller. The MC03 is connected with Microcontroller unit and PC. The computer interface module is made...

MC03

View

TRAINING & EDUCATION SYSTEMS

MC04 Display Module

MC04 Display Module is a learning platform to study the working of displays used for industrial applications. MC04 has been designed to demonstrate the applications of Nvis Microcontroller development platforms. The object is to connect and program a Microcontroller to display data and monitoring. Contrast and backlight control are provided on the module.

MC04

View

TRAINING & EDUCATION SYSTEMS

MC05 Motor Drive Module

MC05 Motor Drive Module is an extension module for Nvis Microcontroller development Platforms. MC05 has been designed to provide a clear understanding of how motors are interfaced and controlled with Microcontroller. The Motor Drive module is made in such a way that student can understand the detailed concepts of Stepper Motor, DC Motor, and Servo Motor...

MC05

View

TRAINING & EDUCATION SYSTEMS

MC06 Elevator Control Module

MC06 Elevator Control Module enables the students and practicing engineers to gain invaluable practical experience of the principles and application of Elevator and Microcontroller. The object is to connect and program an external controller to monitor and control the Elevator system. Elevator control module is shown with the help of switches and LEDs.

MC06

View

TRAINING & EDUCATION SYSTEMS

MC07 TTL I/O Interface Module

MC07 TTL I/O Interface Module enables the students and practicing engineers to gain invaluable practical experience of the principles and applications of a Microcontroller. The aim is to program an external controller for performing experiments like combination controller (AND, OR, XOR and NOT operations), sequential controller, programmable counter,...

MC07

View

TRAINING & EDUCATION SYSTEMS

MC08 Real Time Clock Module

MC08 Real Time Clock Module is an extension module for Nvis Microcontroller development platforms. It helps the user to gain invaluable practical experience of the principles and application of real time clock, LCD, switch and buzzer module in microcontroller based projects. Real Time Clock module MC08 is generally used in the applications such as real...

MC08

View

TRAINING & EDUCATION SYSTEMS

MC09 Graphical Display Module

MC09 Graphical Display Module helps the user to gain invaluable practical experience of the principles and application of Graphical LCD display in Microcontroller based projects. The object is to connect and program a Microcontroller to display data, images and monitoring. Graphical display module MC09 is generally used in the applications such as...

MC09

View

TRAINING & EDUCATION SYSTEMS

MC10 Display and Switches Module

Nvis Technologies MC10 Display and Switches Module is an extension module for Nvis Microcontroller development platforms. The object is to have a clear understanding of how input peripherals are interfaced and controlled with Microcontroller. The object is to connect and program a Microcontroller to display data and for monitoring. Display and Switches...

MC10

View

TRAINING & EDUCATION SYSTEMS

MC11 Multi Interface Module

Nvis Technologies MC11 Multi Interface Module is an extension module for Nvis Microcontroller development platforms. The object is to have a clear understanding of how input peripherals are interfaced and controlled with Microcontroller. MC11 has been designed to have a clear understanding of how Stepper Motor is interfaced and controlled with 2...

MC11

View

TRAINING & EDUCATION SYSTEMS

MC12 Infrared Module

Nvis Technologies MC12 Infrared Module is an extension module for Nvis Microcontroller development platforms. The object is to have a clear understanding of how Infrared device can be interfaced and controlled with Microcontroller. Infrared module, MC12 has input and output terminals for connection of external real world applications.

MC12

View

TRAINING & EDUCATION SYSTEMS

MC13 I2C ADC/DAC Module 10 bit

MC13 I2C ADC/DAC Module enables students and practicing engineers to gain practical experience of applications of Microcontroller. The object is to understand how two wire serial interface device is used for interfacing with Microcontroller to communicate with external applications. Analog inputs are converted into digital through Microcontrollers and...

MC13

View

TRAINING & EDUCATION SYSTEMS

MC14 SD Card Interface Module

Nvis Technologies MC14 SD Card Interface Module is an extension module for Nvis Microcontroller development platforms. The object is to have a clear understanding of how Industry Standard SPI communication based SD card can interface and controlled with Microcontroller.

MC14

View

TRAINING & EDUCATION SYSTEMS

MC15 Sensor Module

Nvis Technologies input interface module MC15 is an extension module for Nvis Microcontroller development platforms. The module has been designed to demonstrate the students and practicing engineers to gain invaluable practical experience on the principle and applications of Microcontroller. The object is to have a clear understanding of how Sensors (like...

MC15

View

TRAINING & EDUCATION SYSTEMS

MC16 PWM Based Voltage Regulator Module

MC16 PWM Based Voltage Regulator Module enable students and practicing engineers to gain invaluable practical experience of voltage regulation using Pulse width modulation (PWM). The object is to have a clear understanding of how PWM is generated using Microcontroller to use in various applications like Servo Motor speed control etc.

MC16

View

TRAINING & EDUCATION SYSTEMS

MC17 Vehicle Motion Detector Module

Nvis Technologies MC17 Vehicle Motion Detector Module is an extension for Nivs Microcontroller development platforms. The object is to have a clear understanding of how to measure the speed of vehicle using Microcontroller. Vehicle motion detector module. MC17 has input and output terminals for connection of external real world applications.

MC17

View

Nvis 7010 Scott Connection Trainer Laboratory

TRAINING & EDUCATION SYSTEMS

Nvis 7010 Scott Connection Trainer Laboratory

Nvis 7010 Scott Connection Trainer Laboratoryr is a vital training system for the Electrical Laboratories. It provides comprehensive learning of Three Phase to Two Phase Conversion in a very simple manner. It helps to study and analyze the operation of Teaser Transformer and Main Transformer. Students can per for m stand alone operations and observe the...

Nvis7010

View

MSFSI 1 Bosch Motronic Med 7.5.10 (FSI) Training Board - Simulator

MSFSI 1 Bosch Motronic Med 7.5.10 (FSI) Training Board - Simulator 2

TRAINING & EDUCATION SYSTEMS

MSFSI01 Bosch Motronic Med 7.5.10 (FSI) Training Board - Simulator

The MSFSI 1 training board-simulator is a great educational tool that allows students to learn the structure of engine control system, study its components and operation modes, perform various measurements, tests and other diagnostic procedures.

MSFSI01

View

MSMPI 1 MOTRONIC M 3.8.X (MPI) Training Board-Simulator

TRAINING & EDUCATION SYSTEMS

MSMPI 1 MOTRONIC M 3.8.X (MPI) Training Board-Simulator

MSMPI 1

This MSMPI1 training board-simulator is specially designed to help technical students understand multipoint petrol injection (MPI) system MOTRONIC M 3.8.X.

View

MSSRS 1 SRS BOSCH AB 8.4 (AIRBAG) Training Board

TRAINING & EDUCATION SYSTEMS

MSSRS1 SRS BOSCH AB 8.4 (AIRBAG) Training Board

MSSRS1

This training board-simulator is specially designed to help technical students understand the system's construction.

View

MSABS1 ABS 5.3 BOSCH Braking System Training Board – Simulator

TRAINING & EDUCATION SYSTEMS

MSABS1 ABS 5.3 BOSCH Braking System Training Board – Simulator

MSABS1

This training board-simulator is specially designed to demonstrate ABS braking systems and operational structure.

View

TRAINING & EDUCATION SYSTEMS

MSSS01 Braking System Rig

The training brake rig is a great educational tool that allows students to learn the structure of hydraulic braking system, study its components, perform various measurements, tests and other service and diagnostic procedures.

MSSS01

View

TRAINING & EDUCATION SYSTEMS

MSCAN 1 CAN BUS Training Board

The training board-simulator is a great educational tool that allows students to learn the structure of CAN gateway system, study its components, and perform various measurements, tests and other diagnostic procedures.

MSCAN 1

View

MSC1 Air Conditioning and Climate Control System Training Board (System with Orifice Tube)

TRAINING & EDUCATION SYSTEMS

MSC1 Air Conditioning and Climate Control System Training Board (System with Orifice Tube)

The MSC 1 training board-simulator is a great educational tool that allows students to learn the structure of air conditioning and climate control system, study its components, and perform various measurements, tests and other diagnostic procedures to use diagnostic scan tools or other special tools and equipment. Price on request.

MSC1

View

MSC2 Air Conditioning and Climate Control System Training Board (System with Expansion Valve)

TRAINING & EDUCATION SYSTEMS

MSC2 Air Conditioning and Climate Control System Training Board (System with Expansion...

Air conditioning and climate control trainer Air-conditioning system trainer System with an expansion valve Electronic climate control system CLIMATRONIC Fully functional system with R134a refrigerant Diagnosis through OBD 16 pole diagnostic socket Open contacts for measuring of system's components and circuits Fault code simulations The MSC 2 training...

MSC2

View

MSC3-B Dual Zone Air Conditioning and Climate Control Trainer with Auxiliary Heater

TRAINING & EDUCATION SYSTEMS

MSC3-B Dual Zone Air Conditioning and Climate Control Trainer with Auxiliary Heater

◆ Trainer of air conditioning systems◆ With auxiliary petrol heating unit.◆ CLIMATRONIC electronic air conditioning system◆ Fully functional system with R134a refrigerant◆ Diagnostics via 16-pin OBD diagnostic connector◆ Open contacts to measure system components/circuits.◆ Hidden fault code simulator for studentsGreat educational tool that allows...

MSC3-B

View

MSTACH03 Educational Analogue Tachograph

TRAINING & EDUCATION SYSTEMS

MSTACH03 Educational Analogue Tachograph

An educational analogue truck tachograph with paper disc charts is a great educational tool for students of automotive technical subjects and truck drivers to learn about different analogue truck tachograph usage and operation modes.

MSTACH03

View

TRAINING & EDUCATION SYSTEMS

MSTACH02 Digital Tachograph Simulator

Truck tachograph simulator Fully functional system Driving speed simulation Rest and driving time modes 3 cards included: Driver Card, Workshop Card, Company Card Print driving reports Multilanguage Fully functional system is specially designed to train truck drivers and students about different truck tachograph usage and operation modes.

MSTACH02

View

TRAINING & EDUCATION SYSTEMS

New Automotive Lighting Training Board MSAS1+T13pin

The training board-simulator is a great educational tool that allows students to learn the structure of lighting system, study its components, and perform various measurements, tests and other diagnostic procedures. The lighting training stand includes:• Electric wiring diagram with built-in banana plug jumpers for measurements and connecting or...

MSAS1

View

MSABS/ASR 1 ABS/ASR 5.3 BOSCH Braking System Training Board–Simulator

TRAINING & EDUCATION SYSTEMS

MSABS/ASR 1 ABS/ASR 5.3 BOSCH Braking System Training Board–Simulator

The training board-simulator is a great educational tool that allows students to learn the structure of ABS/ASR control system, study its components, perform various measurements, tests and other diagnostic procedures. Price on request.

MSABS / ASR 1

View

MSSRS2 SRS SIEMENS III (AIRBAG) Training Board

TRAINING & EDUCATION SYSTEMS

MSSRS2 SRS SIEMENS III (AIRBAG) Training Board

MSSRS2

View

MSMSG1 Automotive Charging System Training Stand

TRAINING & EDUCATION SYSTEMS

MSMSG1 Automotive Charging System Training Stand

The AutoEDU charging system training stand is specially designed to demonstrate working principals of the car alternator which is used in modern automobiles for charging the battery and powering the electrical system when the engine is in running condition.

MSMSG1

View

MVSCR1 Educational Truck Diesel Engine with CR System (Common Rail)

TRAINING & EDUCATION SYSTEMS

MVSCR1 Educational Truck Diesel Engine with CR System (Common Rail)

Training truck engine is a great educational tool that allows students to learn the structure of engine and its components, power supply system, cooling system, engine control system. It also allows to study components and operation modes of the engine control system, perform various measurements, tests and other diagnostic procedures.

MVSCR1

View

VIVV1 RHX Diesel CR Turbo Engine for Disassembling and Assembling

TRAINING & EDUCATION SYSTEMS

VIVV1 RHX Diesel CR Turbo Engine for Disassembling and Assembling

VIVV1 RHX

View

GDIVV1 Gearboxes for Disassembling and Assembling

TRAINING & EDUCATION SYSTEMS

GDIVV1 Gearboxes for Disassembling and Assembling

- AutoEdu designs and manufactures awide range of automotive training equipment for teaching and training purposes on automotive technologies.-Contact us if you are interested in Gearbox Educational Trainers for disassembling and assembling GDIVV1.

GDIVV1

View

MSPS EBS D Truck Trailer WABCO EBS D 2S/2M Braking SystemTraining stand

TRAINING & EDUCATION SYSTEMS

MSPS EBS D Truck Trailer WABCO EBS D 2S/2M Braking System Training stand

MSPS EBS D

The training stand is specially designed to demonstrate pneumatic braking system with electronic EBS system

View

TRAINING & EDUCATION SYSTEMS

AVS1 Automotive 12V Starter Educational Trainer

AutoEDU automotive 12V starter functional model is specially designed to demonstrate car’s starter working principals which are used in modern cars. Equipment for technical and vocational automotive education and training.

AVS1

View

MSD 1 Sensors and Actuators Training Board

TRAINING & EDUCATION SYSTEMS

MSD 1 Sensors and Actuators Training Board

MSD 1

The training board-simulator is a great educational tool that allows students to study its components, and perform various measurements, tests and other diagnostic procedures.

View

MVCR 1 Diesel Engine Model with CR EDC - 15 Fuel Supply System EURO 3

MVCR 1 Diesel Engine Model with CR EDC - 15 Fuel Supply System EURO 3 2

TRAINING & EDUCATION SYSTEMS

MVCR1 Educational diesel engine model with CR EDC - 15 fuel supply system

The training engine is a great educational tool that allows students to learn the structure of engine and its components, power supply system, cooling system, engine control system. It also allows to study components and operation modes of the engine control system, perform various measurements, tests and other diagnostic procedures.

MVCR1

View

MVTSI 1 Educational Working Engine Model with (TSI) Direct Petrol Injection

TRAINING & EDUCATION SYSTEMS

MVTSI1 Educational Working Engine Model with (TSI) Direct Petrol Injection

The training engine is a great educational tool that allows students to learn the structure of the engine and its components, power supply system, cooling system, engine control system, turbocharger. It also allows to study components and operation modes of the engine control system, perform various measurements, tests and other diagnostic procedures.

MVTSI1

View

MVMPI 1 Automotive Educational Engine Model with Petrol Injection System MOTRONIC

TRAINING & EDUCATION SYSTEMS

MVMPI 1 Automotive Educational Engine Model with Petrol Injection System MOTRONIC

MVMPI 1

View

MVHY 1 Petrol/Electric HYBRID Technology Working Engine Model

TRAINING & EDUCATION SYSTEMS

MVHY 1 Petrol/Electric HYBRID Technology Working Engine Model

The training engine model with functional petrol/electric hybrid powertrain is a great educational equipment that allows students to learn the components of the hybrid system, power supply system, rechargeable energy storage system and cooling system. It also allows to study components and operation modes of the engine, perform various measurements, tests...

MVHY 1

View

MVSPLD 1 Automotive Educational Engine Model with the Pump – Line – Nozzle (PLD) Fuel Supply System

TRAINING & EDUCATION SYSTEMS

MVSPLD 1 Automotive Educational Engine model with the Pump – Line – Nozzle (PLD) Fuel...

The truck engine for training is a great tool that allows students to learn the structure of an engine and its components, power supply, cooling system, engine control system. It also allows to study the components and the mode of operation of the engine control system, perform different measurements, evaluations and other types of diagnostics.

MVSPLD 1

View

PMTP-01 Toyota Prius II HYBRID Technology Functional Model

TRAINING & EDUCATION SYSTEMS

PMTP-01 Toyota Prius II HYBRID Technology Functional Model

Toyota PRIUS II Hybrid ½ Educational Trainer PMTP-01 Functional Vehicle based on Toyota Prius II This functional model is a great educational tool that allows students to learn the components of the hybrid system, air conditioning system, ABS system, SRS AIRBAG system and other systems and its components, operation modes, various measurements, tests and...

PMTP-01

View

PMTPK-01 Toyota Prius II HYBRID Technology Cabrio Version Functional Model

TRAINING & EDUCATION SYSTEMS

PMTPK-01 Toyota Prius II HYBRID Technology Cabrio Version Functional Model

Functional Vehicle based on Toyota Prius II Cabrio Version This cabrio version functional model is a great educational tool that allows students to learn the components of the hybrid system, air conditioning system, SRS AIRBAG system and other systems and its components, operation modes, various measurements, tests and other diagnostic procedures. Also,...

PMTPK-01

View

TRAINING & EDUCATION SYSTEMS

MSVAZ1 Wheel Alignment Training Stand

Using this training stand it is very easy to teach several students at the same time, because all suspension components are visible from all sides. Suspension geometry adjustments are performed like in a real automobile – using screws and tools.

MSVAZ1

View

IVDB01 Petrol Engine Cutaway Model DOHC FSI

TRAINING & EDUCATION SYSTEMS

IVDB01 Petrol Engine Cutaway Model DOHC FSI

The training engine cutaway model is a great educational tool that allows students to learn the structure of the engine and its components, operation modes and maintenance, technical specifications, special tools and their use.

IVDB01

View

IVDB02 Petrol Engine Cutaway Model DOHC MPI

TRAINING & EDUCATION SYSTEMS

IVDB02 Petrol Engine Cutaway Model DOHC MPI

Petrol DOHC MPI engine ½ cutaway Educational Trainer IVDB02 The training cutaway model is a great educational tool that allows automotive students to learn the structure of the engine and its components, operation principles and maintenance techniques, technical specifications, special tools and their use.

IVDB02

View

IVOD–CR01 Diesel Engine Cutaway Model OHC (CR)

TRAINING & EDUCATION SYSTEMS

IVOD–CR01 Diesel Engine Cutaway Model OHC (CR)

Training engine cutaway model is a great educational tool that allows students to learn the structure of the engine and its components, operation modes and maintenance, technical specifications, special tools and their use.

IVOD–CR01

View

IVDD-CR02 Diesel DOHC Common Rail Engine Cutaway Model

TRAINING & EDUCATION SYSTEMS

IVDD-CR02 Diesel DOHC Common Rail Engine Cutaway Model

Educational training engine model is based on original components of the vehicle. This cutaway model is coloured in different colours in order various parts and cross-sections could be easier differentiated.

IVDD-CR02

View

TRAINING & EDUCATION SYSTEMS

MSCAN2 CAN BUS Training Dashboard

MSCAN2

CAN BUS Training Stand

View

TRAINING & EDUCATION SYSTEMS

MSUS1 Ignition System Training Board

MSUS1

View

MVMPI2-Toyota-Engine Educational Petrol Engine with Multipoint Injection System (MPI) (EURO 4-5)

TRAINING & EDUCATION SYSTEMS

MVMPI2-Toyota-Engine Educational Petrol Engine with Multipoint Injection System (MPI)...

MVMPI2-Toyota-Engine

View

MVGDI 1 Petrol Engine with Direct Injection System (GDI)

TRAINING & EDUCATION SYSTEMS

MVGDI 1 Petrol Engine with Direct Injection System (GDI)

MVGDI 1

View

MVFSI 1 Educational Working Engine Model with (FSI) Direct Petrol Injection

TRAINING & EDUCATION SYSTEMS

MVFSI1 Educational Working Engine Model with (FSI) Direct Petrol Injection

The training model is a great educational tool that allows students to learn the structure of the engine and its components, power supply system, cooling system, control system, turbocharger. It also allows to study components and operation modes, perform various measurements, tests and other diagnostic procedures.

MVFSI1

View

MVMPILPG 1 Educational Petrol Engine with LPG System (MPI + LPG) EURO 3

TRAINING & EDUCATION SYSTEMS

MVMPILPG 1 Educational Petrol Engine with LPG System (MPI + LPG) EURO 3

MVMPILPG 1

View

MVMPILPG2 Educational Petrol Engine with LPG System (MPI+LPG) EURO 4

TRAINING & EDUCATION SYSTEMS

MVMPILPG2 Educational Petrol Engine with LPG System (MPI+LPG) EURO 4

MVMPILPG2

View

TRAINING & EDUCATION SYSTEMS

MVVE 1 Diesel Engine with VE Pump (TDI)

MVVE 1

View

TRAINING & EDUCATION SYSTEMS

MVPD 1 Diesel Engine with PD System

MVPD 1

View

MVCR3 Educational Diesel Engine with CR (Common Rail) System EURO 5

TRAINING & EDUCATION SYSTEMS

MVCR3 Educational Diesel Engine with CR (Common Rail) System EURO 5

MVCR3

View

TRAINING & EDUCATION SYSTEMS

Eddy Current Brake | Dyno-400

Dyno-400

Gain complete experience with the high-quality eddy current brake dynamometer for measuring engine performance up to 400 Nm of torque.

View

MVMPI+Dyno Educational Petrol Engine with Multipoint Injection System + Dyno

TRAINING & EDUCATION SYSTEMS

MVMPI+Dyno Educational Petrol Engine with Multipoint Injection System + Dyno

MVMPI+Dyno

View

MVTSI+Dyno Educational Petrol Engine with Direct Injection System (TSI) EURO 5 + Dyno

TRAINING & EDUCATION SYSTEMS

MVTSI+Dyno Educational Petrol Engine with Direct Injection System (TSI) EURO 5 + Dyno

MVTSI+Dyno

View

TRAINING & EDUCATION SYSTEMS

AEPRES Fuel Pressure Gauge

AEPRES

View

AE12F-ENG Hidden Fault Simulation for Engine Control System

TRAINING & EDUCATION SYSTEMS

AE12F-ENG Hidden Fault Simulation for Engine Control System

Let us know what kind of engine model system you would be interested in?Petrol MPI, FSI, TSI or Diesel Common Rail Euro 3, Euro 4 or Euro 5?Depending on the engine model AutoEdu will be able to make an offer and discuss how many "hidden fault tests" can be included. The AE12F-ENG should be ordered together with the stand! More information about hidden...

AE12F-ENG

View

TRAINING & EDUCATION SYSTEMS

AEVAC-ENG Vacuum Measuring Gauge

AEVAC-ENG

View

MVSCR3 Educational Truck Diesel Engine V8

TRAINING & EDUCATION SYSTEMS

MVSCR3 Educational Truck Diesel Engine V8

MVSCR3

View

MVSPLD2 Educational Truck Diesel Engine with PLD System

TRAINING & EDUCATION SYSTEMS

MVSPLD2 Educational Truck Diesel Engine with PLD System

MVSPLD2

View

GDVV1 MULTI Gearboxes for Disassembling and Assembling

TRAINING & EDUCATION SYSTEMS

GDVV1 MULTI Gearboxes for Disassembling and Assembling

GDVV1 MULTI

View

MSSS03 Braking System Rig (Bench Version)

TRAINING & EDUCATION SYSTEMS

MSSS03 Braking System Rig (Bench Version)

MSSS03

View

TRAINING & EDUCATION SYSTEMS

MSEVS1 Electro Hydraulic Steering Rig

MSEVS1

View

MSEPB1 Electromechanical Parking Brake (EPB)

TRAINING & EDUCATION SYSTEMS

MSEPB1 Electromechanical Parking Brake (EPB)

Educational electromechanical parking brake (EPB) model is based on original Audi/VW brake components. The cutaway of the multi-stage gear mechanism of electromechanical brake made for an easier explanation and demonstrate the principle of operations.

MSEPB1

View

PMTP-AC/Box Optional Accessories for Functional Models (Climate Control)

TRAINING & EDUCATION SYSTEMS

PMTP-AC/Box Optional Accessories for Functional Models (Climate Control)

PMTP-AC/Box

View

PMTP-AC/Faults Optional Accessories for Functional Models (Climate Control (6 Faults)

TRAINING & EDUCATION SYSTEMS

PMTP-AC/Faults Optional Accessories for Functional Models (Climate Control (6 Faults)

PMTP-AC/Faults

Fault simulation for climate control (6 faults)

View

PMTP-ENG/Box Optional Accessories for Functional Models (Engine Control System)

PMTP-ENG/Box Optional Accessories for Functional Models (Engine Control System) 2

TRAINING & EDUCATION SYSTEMS

PMTP-ENG/Box Accessories for Functional Models (Engine Control System)

PMTP-ENG/Box

View

PMTP-ENG/Faults Optional Accessories for Functional Models (Engine Control System (10 Faults))

PMTP-ENG/Faults Optional Accessories for Functional Models (Engine Control System (10 Faults)) 2

TRAINING & EDUCATION SYSTEMS

PMTP-ENG/Faults Accessories for Functional Models (Engine Control System: 10 Faults)

PMTP-ENG/Faults

Fault simulation for engine control system (10 faults)

View

PMTP-SRS/Box Optional Accessories for Functional Models (SRS AIRBAG)

TRAINING & EDUCATION SYSTEMS

PMTP-SRS/Box Optional Accessories for Functional Models (SRS AIRBAG)

PMTP-SRS/Box

View

PMTP-SRS/Faults Optional Accessories for Functional Models (SRS AIRBAG (6 Faults))

TRAINING & EDUCATION SYSTEMS

PMTP-SRS/Faults Optional Accessories for Functional Models (SRS AIRBAG (6 Faults))

PMTP-SRS/Faults

Fault simulation for SRS AIRBAG (6 faults)

View

TRAINING & EDUCATION SYSTEMS

IVOD1/4 Diesel Engine ¼ Cutaway Model

IVOD1/4

View

IVDB1/4 Petrol DOHC Engine ¼ Cutaway Model

TRAINING & EDUCATION SYSTEMS

IVDB1/4 Petrol DOHC Engine ¼ Cutaway Model

IVDB1/4

View

AE37450 2 Stroke Petrol Engine Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE37450 2 Stroke Petrol Engine Cutaway Model

AE37450

View

AE37460 4 Stroke Petrol Engine Model with Electronic Injection Monojetronic (On Base) – Manual

TRAINING & EDUCATION SYSTEMS

AE37460 4 Stroke Petrol Engine Model with Electronic Injection Monojetronic (On Base) –...

AE37460

The most rational training model of a 4-stroke petrol engine. During the combustion phase a bulb lights up to simulate the mixture ignition.The engine is operated manually through a crank handle.

View

AE37100 Direct Injection 2 Stroke Diesel Engine Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE37100 Direct Injection 2 Stroke Diesel Engine Cutaway Model

AE37100

The most traditional training model of a 4-stroke diesel engine sectioned for training purposes.

View

AE35205 6V Cylinders Petrol Engine with Multi-point Electronic Injection Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE35205 6V Cylinders Petrol Engine with Multi-point Electronic Injection Cutaway Model

AE35205

View

AE36010 16 Valve CHRYSLER Turbo Diesel Eengine with (Common–Rail) Intercooler (On Stand with Wheels) – Electrical

TRAINING & EDUCATION SYSTEMS

AE36010 16 Valve CHRYSLER Turbo Diesel Eengine with (Common–Rail) Intercooler (On Stand...

AE36010

View

AE36015 8 Valve Engine with Turbo Diesel Common-Rail Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE36015 8 Valve Engine with Turbo Diesel Common-Rail Cutaway Model

AE36015

View

AEMBA170 Diesel Common Rail Engine (DOHC) Cutaway Model with Manual Gearbox

TRAINING & EDUCATION SYSTEMS

AEMBA170 Diesel Common Rail Engine (DOHC) Cutaway Model with Manual Gearbox

The educational diesel Common Rail engine cutaway model is a great tool for students of technical studies for practical training and allows to learn the structure of the engine and its components, manual gearbox, operation modes and maintenance, technical specifications, special tools and their use.

AEMBA170

View

AE35230 2 Cylinders Petrol Engine Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE35230 2 Cylinders Petrol Engine Cutaway Model

AE35230

View

VIVV1 Engines for Disassembling and Assembling

TRAINING & EDUCATION SYSTEMS

VIVV1 Engines for Disassembling and Assembling

VIVV1

View

MVCR2 Educational Diesel Engine with CR (Common Rail) System EURO 4

TRAINING & EDUCATION SYSTEMS

MVCR2 Educational Diesel Engine with CR (Common Rail) System EURO 4

The training engine is a great educational tool that allows students to learn the structure of the engine and its components, power supply system, cooling system, engine control system. It also allows to study components and operation modes of the engine control system, perform various measurements, tests and other diagnostic procedures.

MVCR2

View

AE34805 16 Valve 4 Cylinders FIAT Engine with Multi-point Electronic Injection

TRAINING & EDUCATION SYSTEMS

AE34805 16 Valve 4 Cylinders FIAT Engine with Multi-point Electronic Injection

16 Valve 4 Cylinders FIAT Engine with Multi-point Electronic Injection + Gearbox 5 Forward Speeds + Reverse (On Stand with Wheels) – Electrical The engine operates electrically at 220 volts and runs at a reduced speed to let the student easily understand and observe the operation of the various mechanical parts.

AE34805

View

AE35220 C Fiat Petrol Engine with Carburettor + Gearbox (on Stand with Wheels) – Electrical

AE35220 C Fiat Petrol Engine with Carburettor + Gearbox (on Stand with Wheels) – Electrical 2

TRAINING & EDUCATION SYSTEMS

AE35220 IE FIAT Petrol Engine with Electronic Injection – Monojetronic and Gearbox...

AE35220 IE

View

AE35222IE FIAT Petrol Engine with Multipoint Electronic Injection and Gearbox Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE35222IE FIAT Petrol Engine with Multipoint Electronic Injection and Gearbox Cutaway...

AE35222IE

View

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model

TRAINING & EDUCATION SYSTEMS

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm...

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

AE36084

View

AE411300 4X4 Vehicle Transmission Assembly with 5 Speed Mechanical

TRAINING & EDUCATION SYSTEMS

AE411300 4X4 Vehicle Transmission Assembly with 5 Speed Mechanical

AE411300

View

AT-S01 Boeing B737-800 Maintenance Simulation

AT-S01 Boeing B737-800 Maintenance Simulation 2

TRAINING & EDUCATION SYSTEMS

AT-S01 Boeing B737-800 Maintenance Simulation Trainer

The 26 simulation modules provide a step-by-step approach for users to learn from Aircraft Walkaround to the internal cockpit control in every aspect of B737-800. Moreover, the simulation content focuses on the introduction to the position of every control panel and component parts in terms of the operation method and control theory. It is an ideal...

AT-S01

View

GAS ANALYZERS

AO-4A 4 in 1 Multi-Gas Detector

AO-4A

€280.00

4 in 1 portable gas heater biogas leak detector analyzer with external sampling pump.

MX1105 HOBO 4-Channel Analog Data Logger Bluetooth

INSIDE & OUTSIDE USE

MX1105 HOBO 4-Channel Analog Data Logger Bluetooth

The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology. Important InformationExternal sensors sold separately. Requires HOBOconnect app and a compatible mobile device or Windows computer.

MX1105

€225.00

MX1104 HOBO Analog/Temp/RH/Light Data Logger

MX1104 HOBO Analog/Temp/RH/Light Data Logger 2

INSIDE & OUTSIDE USE

MX1104 Bluetooth Temp/RH/Light/Analog i/p Data Logger

The HOBO MX1104 multi-channel data logger measures and transmits temperature, relative humidity, and light intensity data wirelessly.It also includes an external analog input to attach a variety of additional (optional) sensors.

MX1104

€225.00

LIGHT & LASER SOURCES

Nvis 652 Mercury Light Source 160W

Nvis652

Nvis 652 Mercury Light Source is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

LIGHT & LASER SOURCES

Nvis 651 Incandescent Light Source 150W

Nvis651

Nvis 651 Incandescent Light Source is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

LIGHT & LASER SOURCES

Nvis 653 Sodium Light Source 35W

Nvis653

Nvis 653 Sodium Light Source is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

LIGHT & LASER SOURCES

Nvis 654 Laser Source 630nm

Nvis654

Nvis 654 Laser Source is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

LIGHT & LASER SOURCES

SL3 Deuterium Lamp

SL3

UltraViolet range from 190-450 nm

View

SL5-DH UV-VIS Tungsten Halogen + Deuterium Lamps UV & Visible range from 190-2500nm

SL5-DH UV-VIS Tungsten Halogen + Deuterium Lamps UV & Visible range from 190-2500nm 2

LIGHT & LASER SOURCES

SL5-DH UV-VIS Continuous white light source UV-Vis-NIR (190-2500nm)

Includes Deuterium and Tungstene lamps. Spectral range 190-2500nm.Includes manual shutter and SMA type connector for fiber optics. StellarNet has a variety of UV-VIS light sources available for spectroscopy applications.

SL5-DH UV-VIS

View

UIS-LS Uniform Illumination Sphere - Light Source

LIGHT & LASER SOURCES

UIS-LS Uniform Illumination Sphere - Light Source

UIS-LS

Spatially Uniform & Stepped Luminance

View

LIGHT & LASER SOURCES

SL1-LED Source

The BH-4S detects 3 gases together and can connect to a PC to download data. BH-4s portable multi-gas detector could detect combustible gas, O2 and other two types toxic gases continuously and simultaneously. It is widely used in the area where explosion-proof is required or toxic gas leaks, like underground channels or mining industry, so as to protect...

SL1-LED

UV & Visible LEDs – 390, 470, 502, 590, 660 nm, & white available

View

GAS ANALYZERS

BH-4S Multi-Gas Detector Ex, CO, H2S, O2 (4 in 1)

Bosean

BH-4S

€255.00

TRAINING & EDUCATION SYSTEMS

KL-800A CAN BUS Autotronic Training System

The KL-800A system can simulate the operation of fuel injection system, ignition system and exhaust gas control. Experiments include the characteristics and operation of various sensors and actuators used in automobiles.

KL-800A

View

Various

TRITON2 LN2 Generator 10 litres/day

MRC

TRITON2

TRITON2 uses the lowest powered cooling system to make it the most efficient and small 10litre/day LN2 production system available.

View

TRAINING & EDUCATION SYSTEMS

MTS-200

MTS-200

NOTE: NO CE MARKING

View

Nvis 9008/ Nvis 9008A Advanced Microwave Integrated Circuit Lab

TRAINING & EDUCATION SYSTEMS

Nvis 9008/ Nvis 9008A Advanced Microwave Integrated Circuit Lab

Nvis9008/Nvis9008A

This Training System Includes:1. Nvis104 Microwave Generator (2.2 - 3 GHz)2. Nvis103 VSWR Meter3. MIC Components4. Learning Material CD5. Transmitting and Receiving mast

View

TRAINING & EDUCATION SYSTEMS

ETS-3000 Sistema de entrenamiento Digital-Analógico

ETS-3000

ETS-3000 provides an environment for students to interact with the starter tables using simple codes and connections.The universal board allows students to build their own circuits.

View

TRAINING & EDUCATION SYSTEMS

PMTP-03 Toyota PRIUS III Hybrid ½ - functional model

Functional Vehicle based on Toyota PRIUS III Hybrid Fully functional model is as an alternative for a complete vehicle, just in space saving version, and it has the same advantages of a complete car. The functional model made from Toyota Prius III, by separation of body just after the B-pillars. In the front end all the components like engine air...

PMTP-03

View

AE–01 Nissan Leaf Electrical Functional Model

TRAINING & EDUCATION SYSTEMS

AE-01 Nissan Leaf Electrical Functional Model

• Educational fully operational electric vehicle based on Nissan Leaf • Engine, ABS, AC, Air BAG’s and etc. diagnostics • Built-in measuring box with open contacts and wiring diagram for 2 electronic systems • Fault code simulations for 2 electronic systems Functional Vehicle based on the Nissan Leaf

AE-01

View

SENSORS & PROBES

AO-HT-100 Laser Range Finder (up to 100 meters)

HTi

AO-HT-100

€69.00

It can be used for ultrasonic distance measuring, mainly applied to measure the distance of urban road planning, construction sites, industrial spots, etc.

SENSORS & PROBES

AO-HT-192 3D Laser Range Finder (0,05 ~ 100m)

HTi

AO-HT-192

€75.00

The AO-HT-192 laser distance meter (100m measurement range) is a laser distance meter with a measurement range of 0.05-100 meters, distance accuracy of ± 3.0mm, functions that help to work like calculate area , volume.

HTi Instruments

AO-HT-A2 Infrared thermal camera

This product is an infrared camera that integrates the measurement of surface temperature and heat image in real time. The central point measurement cursor is used to determine the target temperature quickly and accurately.

AO-HT-A2

€530.00

TRAINING & EDUCATION SYSTEMS

HBE-Robonova AI 3 Humanoid Robot

HBE-Humanoid AI 3 Robot is an Intelligent 16-joint Biped Robot which includes an embedded processor executing intelligent algorithms, FPGA recognition board of high-resolution, CCD image acquisition and Image Processing, and a controller board controlling 32 servo motors simultaneously.

HBE-Robonova AI 3

€9,500.00

View

Nvis 436G Grid-Tied Solar Power Generation Training System

TRAINING & EDUCATION SYSTEMS

Nvis 436G Grid-Tied Solar Power Generation Training System

Nvis 436G

This grid-connected system allows users to power their home or businesses with renewable energy.Any excess electricity produced is fed back into the grid.

View

TRAINING & EDUCATION SYSTEMS

Nvis 425 & Nvis 425A Battery Characteristics Training Systems

Nvis 425: Lead-Acid batteryNvis 425A: Li-ion battery Energy storage is becoming increasingly important for the improvement of the efficiency, the reliability and the price-competitiveness of power utilities & Electric Vehicles, and to achieve deeper integration with intermittent renewable energies.

Nvis 425

View

Nvis 436T Solar energy formation and generation system.

Nvis 436T Solar energy formation and generation system. 2

TRAINING & EDUCATION SYSTEMS

Nvis 436T Solar Power Generation and Training System

• A unique Solar system for electricity generation.• Provided with meters for analysis of parameters• Provided with all safety protections• Connector Sheathed Shock proof type• DC Voltmeter & DC Ammeter• Multi Function Meter

436T

View

TRAINING & EDUCATION SYSTEMS

Nvis 436 Solar Power Generation and Training System

A unique system for electricity generation and learning A complete solution for learning solar photovoltaic system Provided with meters for analysis of parameters Provided with all safety protections Online product tutorial

Nvis 436

View

Scientech2352A TechBook for 12 Lead ECG Simulator

Scientech2352A TechBook for 12 Lead ECG Simulator 2

TRAINING & EDUCATION SYSTEMS

TechBook for 12 Lead ECG Simulator (Scientech 2352A)

Scientech 2352A TechBook for 12 Lead ECG Simulator provides a quick, accurate measurement of all 12 leads including both Unipolar and Bipolar configurations for verifying the performance of real-time ECG monitoring.It illustrates the fundamentals of standard limbs (unipolar and bipolar) and chest leads interpretation and rhythm recognition in an...

2352A

View

TRAINING & EDUCATION SYSTEMS

Tutor for Arduino MTS-101

Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing / Wiring language.Besides the easy-to-use hardware and software interface, Arduino is designed to be as flexible as possible to fit your project's needs.

MTS-101

€1,350.00

Toyota Prius III Petrol/Electric/LPG HYBRID 3/4 technology functional model – PMTPK-05

TRAINING & EDUCATION SYSTEMS

Toyota Prius III Petrol/Electric/LPG HYBRID 3/4 technology functional model – PMTPK-05

Functional Vehicle based on Toyota Prius III Technology Functional Model Gasoline / Electric / LPG HYBRID◆ The operating model allows students to learn the specifics of the systems work, operation modes, various measurements, monitor real parameters and perform diagnostic procedures.◆ The model is based on the Toyota Prius III with an optional internal...

PMTPK-05

View

TRAINING & EDUCATION SYSTEMS

Functional Vehicle AE-FV for Training and Education

AE-FV

- Educational and fully operational vehicle.- Cutaway of different body and internal parts.

View

TRAINING & EDUCATION SYSTEMS

Nvis 72 PCB Prototype Machine

If you are an impatient circuit designer who wants to replicate software design on the PCB with high precision and accuracy, and also without investing much of your valuable time and efforts, we have an exciting solution for you.

Nvis72

View

TRAINING & EDUCATION SYSTEMS

Training Workbenches

Bancos de Trabajo

A World leading company in design, development and manufacture of a wide range of Test and Measurement Solutions, Didactic, Software and Training WorkStations.

View

Scientech2471 Electro Hydraulic Workbench

TRAINING & EDUCATION SYSTEMS

Scientech2471 Electro Hydraulic Workbench

The Scientech 2471 Electro Hydraulic Workbench is designed to teach the design, construction and application of hydraulic components and circuits. Integrates PLC technology to build hybrid Industrial Automation systems with hydraulic components and modules.

Scientech2471

View

TRAINING & EDUCATION SYSTEMS

Nvis 6006C Optical Configuration to determine the Laser beam Divergence

Nvis 6006C Divergence of LASER is an Optical setup helpful to identify characteristic of LASER beam. This product illustrates how the spreading of LASER beam enhances with respect to distance travelled in a medium. Nvis 6006C consists of Optics Bench and Measurement unit. The Measurement unit consists of variable DC power supply, voltage and current...

Nvis6006C

View

Scientech2474 Flow Measuring Workbench Setup

TRAINING & EDUCATION SYSTEMS

Scientech2474 Flow Measuring Workbench Setup

The Scientech2474 workbench is designed to measure the flow. Level Measuring Workbench gives students and professionals in the industry the operation of the instruments to measure and control the flow, and also allows them to learn flow processing systems in an advanced and more complex way. It consists of different types of flow sensors, including the...

Scientech2474

View

TRAINING & EDUCATION SYSTEMS

Nvis 6006 Optical bench for laboratories of Physics and Science

Nvis Optics Bench is a versatile system designed to provide a comprehensive introduction to physics and science laboratories. It clarifies all the basic concepts of light. Setup includes an optics bench Concave, convex lenses and mirrors of different focal length.

Nvis6006

View

Nvis 6006D Inverse Square Law Demonstrator

TRAINING & EDUCATION SYSTEMS

Nvis 6006D Inverse Square Law Demonstrator

Nvis6006D

Nvis 6006D, Inverse Square Law Demonstrator is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

TRAINING & EDUCATION SYSTEMS

Scientech2473 Level Measuring Workbench

The Scientech 2473 workbench designed for level measurement. Level Measuring Workbench gives students and professionals in the industry the operation of level measurement instruments and control, also allows them to learn process systems at advanced and more complex level. It consists of different types of level sensors, solenoid valve, meter and reservoir.

Scientech2473

View

Scientech2470 Electro Pneumatic Workbench

TRAINING & EDUCATION SYSTEMS

Scientech2470 Electro Pneumatic Workbench

The Scientech 2470 Electro-Pneumatic Workbench is designed to demonstrate the design, construction and application of pneumatic components and circuits. Integrates PLC technology to build hybrid industrial automation systems with pneumatic components and modules.

Scientech2470

View

TRAINING & EDUCATION SYSTEMS

AT-13101 Mini Turbine Engine Trainer

AT-13101

AT-13101 Mini Turbine Engine Trainer, with more than 12KG of thrust, was developed and manufactured in Taiwan. This Turbine Engine trainer is controlled by Electronic Control Unit (ECU).

View

TRAINING & EDUCATION SYSTEMS

AT-11007 Avionics Trainer

The Avionics Trainer is available for performing complete functional simulation of a standard aircraft avionics system. Besides that, can be used for providing hands-on training for the students to attain a good understanding of the operating principles of various instruments.

AT-11007

View

Nvis 6110 Measurement of Wavelength of LASER

TRAINING & EDUCATION SYSTEMS

Nvis 6110 Measurement of Wavelength of LASER

Nvis6110

€585.00

Nvis 6110, Measurement of Wavelength of LASER is an ideal platform to enhance education, training, skills & development amongs our young minds.

TRAINING & EDUCATION SYSTEMS

AT-300 Basic Skill Trainer

AT-300

AT-300 is in an H-shaped frame using aluminum alloy, powder coat steel plate, and aluminum sheet metal. It is suitable for aviation training center teaching EASA Part 66 Modules 6, 7, and 11.

View

Scientech2700 High Voltage Power Electronics Lab

TRAINING & EDUCATION SYSTEMS

Scientech2700 High Voltage Power Electronics Lab

Scientech 2700 High Voltage Power Electronics Lab is a compact, ready to use experiment workbench. In this particular workbench there are various applications and experiments of Power Diode and SCR on the workbench with different load configuration.

Scientech2700

View

AT-11003 Navigation & Communication Trainer

TRAINING & EDUCATION SYSTEMS

AT-11003 Navigation & Communication Trainer

The Navigation and Communication Trainer is a basic functional simulation of a standard aircraft avionics system. Besides that, most components in the trainer will be fully functional aircraft components. It is intended for use in avionics / aircraft electronics curriculum and is aimed at providing students with hands-on experience in aircraft avionics.

AT-11003

View

Nvis 6028 Laboratory for Fresnel`s Biprism Setup

TRAINING & EDUCATION SYSTEMS

Nvis 6028 Laboratory for Fresnel`s Biprism Setup

Nvis 6028 la instalación del experimento de brácteos de Fresnel es una plataforma ideal para mejorar la educación, la capacitación, las habilidades y el desarrollo entre nuestras mentes jóvenes.

Nvis6028

View

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics

TRAINING & EDUCATION SYSTEMS

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics experimental setup has been designed to study the mode characteristics of different fiber optic cables. The two basic types of fiber, Single Mode and Multi Mode can be characterized by measuring Numerical Aperture and the Normalized Frequency (V number) parameter, which guides modes that...

Scientech2515

View

INSIDE & OUTSIDE USE

UX100-001 HOBO Temperature Data logger w/display

UX100-001

€115.00

Economic Thermo-hygrometer Data logger 2

Temperature

UX100-003 HOBO Data Logger for Temp./Rel. Humidity

UX100-003

€135.00

Economic Data Loggers HOBO from Onset Computer for Temperatures & Relative Humidity.Data Logger for Energy/HVAC & Air Quality Applications.

8086 Microprocessor Trainer Kit Nvis M86-02 AD

TRAINING & EDUCATION SYSTEMS

8086 Microprocessor Trainer Kit Nvis M86-02 AD

M86-02 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control.This kit consists of a powerful EPROM monitor, RAM, I / O lines, timer / counter, serial, LCD screen and keypad for human machine interface.

M86-02 AD

View

8086 Microprocessor Trainer Kit Nvis M86-02

TRAINING & EDUCATION SYSTEMS

8086 Microprocessor Trainer Kit Nvis M86-02

Nvis M86-02 is a single board Microprocessor Trainer Kit based on 16 bit 8086 Microprocessor, which is widely used to train engineers to develop software/hardware for any industrial process & control.This kit consists of a powerful EPROM monitor, RAM, I / O lines, timer / counter, serial, LCD screen and keypad for human machine interface.

M86-02

View

ELEGOO Basic Starter Set Compatible with Arduino IDE with Tutorial Guides in Spanish for UNO R3 Starter Kit

ELEGOO Basic Starter Set Compatible with Arduino IDE with Tutorial Guides in Spanish for UNO R3 Starter Kit 2

TRAINING & EDUCATION SYSTEMS

Basic Starter Set Compatible with Arduino IDE with Tutorial Guides, Ref.: AO-UNO R3...

◆ Simplest and most basic set for beginners.◆ Compatible with Arduino IDE.◆ Included Tutorial in Spanish.◆ Includes PDF introduction manual to projects.◆ Supplied with code and examples to save searching time.◆ New UNO R3 development board, USB cable and basic components.

AO-UNO R3 Starter Kit

€35.00

Crimper for Network Connectors AO-6067 2

INDUSTRY

Crimper for Network Connectors Ref.: AO-6067

AO-6067

€9.95

- Incutex brand hand crimping tool for RJ45 / 11, 8P8C, 6P6C and 4P4C1 Network connectors.- Ratchet pliers- Crimping tool

Electric vehicle Educational Trainer, MSEV1

TRAINING & EDUCATION SYSTEMS

Electric vehicle Educational Trainer, MSEV1

MSEV1

AutoEDU designs and manufactures automotive training equipment for teaching and training purposes of automotive technology.

View

Hybrid Plug-in functional Educational Trainer, AHPLIN-01

Hybrid Plug-in functional Educational Trainer, AHPLIN-01 2

TRAINING & EDUCATION SYSTEMS

Hybrid Plug-in functional Educational Trainer, AHPLIN-01 based on FORD C-Max.

AutoEdu designs and manufactures automotive training equipment for teaching and training purposes for automotive technology. Contact us if are interested in Hybrid Plug-in functional Educational Trainer AHPLIN-01. Functional Vehicle based on FORD C-Max.

AHPLIN-01

View

Educational petrol engine trainer with direct injection system (TSI) EURO 6 MVTSI3 AutoEDU

Educational petrol engine trainer with direct injection system (TSI) EURO 6 MVTSI3 AutoEDU 2

TRAINING & EDUCATION SYSTEMS

MVTSI3 Educational petrol engine trainer with direct injection system (TSI) EURO 6 AutoEDU

MVTSI3

- Equipment for technical and vocational automotive education and training.

View

Educational Petrol Engine Trainer With Direct Injection System (TSI) EURO 5 MVTSI2 AutoEDU

Educational Petrol Engine Trainer With Direct Injection System (TSI) EURO 5 MVTSI2 AutoEDU 2

TRAINING & EDUCATION SYSTEMS

MVTSI2 Educational Petrol Engine Trainer With Direct Injection System (TSI) EURO 5 AutoEDU

AutoEdu designs and manufactures automotive training equipment for teaching and training purposes of automotive technology.Please contact us if are interested in this Educational Petrol Engine Trainer With Direct Injection System (TSI) EURO 5 MVTSI2 from AutoEDU.

MVTSI2

View

TRAINING & EDUCATION SYSTEMS

KL-910 Advanced Telecommunication Training System

ADVANCED COMMUNICATION SYSTEM - for educational teaching, training, and learning of telecommuncation / line code / QPSK / 8PSK / 8QAM / delta / sigma / adaptive / DTMF / TDM / PAM / FDM / VCO / DPBSK KL-910 is a Modular Training System with various advanced communication experiments, including digital encoding/decoding, modulation/demodulation and related...

KL-910

View

TRAINING & EDUCATION SYSTEMS

KL-300 Digital Logic Lab

KL-300

The KL-300 Digital Logic Lab is a comprehensive and self-contained system suitable for anyone engaged in digital logic experiments.

View

TRAINING & EDUCATION SYSTEMS

KandH GES-200 Wind Energy Trainer

◆ The GES-200 Wind Energy Trainer is designed for learning the basics and the characteristics of wind energy.◆ The current-voltage characteristic curves and charging / discharging curves are obtained through the use of different wind speeds, load units and wind generators.

GES-200

View

TRAINING & EDUCATION SYSTEMS

KL-100 Laboratory for Electronic Experiments with Linear Circuits (1)

KL-100

View

KandH

KandH IOT-100 Innovative IoT Experiment Platform

IOT-100

With the most popular wireless protocols and sensors.WiFi / Bluetooth / ZigBee / EnOcean and 19 sensors with complete tutorial

View

KandH IoT-110 Edge IoT Teaching Platform

TRAINING & EDUCATION SYSTEMS

KandH IoT-110 Edge IoT Teaching Platform

◆ IoT - when artificial intelligence meets Internet of Things◆ IoT-110 is a platform that integrates the training of edge computing, AI,and IoT, whose system consists of 16 sensor modules, edge computing modules, and AI computing accelerators.Each of the 16 sensor modules is embedded in a separate aluminium housing. The shell contains a hook and each...

IoT-110

View

TRAINING & EDUCATION SYSTEMS

KandH BD-101 Big Data Experiment Lab

◆ Big data is one of the most popular terms in recent years. More and more industries begin to use the findings of big data analysis to formulate future strategic decisions. Therefore, the demand for big data related talents is increasing accordingly.◆ The Big Data Experiment Lab (BD-101) is designed for big data analysis skills training. The rich and...

BD-101

View

KandH PLC-220 Programmable Logic Controller (SIEMENS S7-1200) Trainer

TRAINING & EDUCATION SYSTEMS

KandH PLC-220 Programmable Logic Controller (SIEMENS S7-1200) Trainer

◆ PLC-220 is a self-contained trainer which consists of a SIEMENS PLC main unit and commonly used I/O devices for simulation. It offers students excellent theories and wide applications of programmable logic controllers.◆ This trainer enables students to learn step by step from the fundamentals of PLC to more advanced controls used in industry.

PLC-220

View

Scientech 2140-5G-VoLTE Smart Phone Training System

TRAINING & EDUCATION SYSTEMS

Scientech 2140-5G-VoLTE Smart Phone Training System

◆ Scientech 2140 5G VoLTE Smart Phone Training System is a distinct, demonstration-based training solution.◆ It offers a hands on lab experience of working and functioning of 5G Dual SIM VoLTE Smart phone.◆ It focuses on indepth knowledge and understanding the fundamentals of evolving 5G technology.

2140-5G-VoLTE

View

K&H ETS-9000 Advanced Digital Training System

TRAINING & EDUCATION SYSTEMS

K&H ETS-9000 Advanced Digital Training System

◆ The ETS-9000 Advanced Digital Training System is suitable for combinational logic, sequential logic, microprocessor circuits, FPGA, etc.◆ All necessary devices for experiments such as Function generator, Pulser switch, Speaker, Power supply, Digital displays and Logic probe are installed on the main unit.◆ Users can also program Arduino codes with...

ETS-9000

View

Autoedu

MSAS02 Lighting Educational Trainer (OBD 16 Pin)

◆ Advanced educational simulator housed in a mobile aluminum frame, featuring authentic VW/AUDI OEM components. It integrates a comprehensive electric wiring diagram with banana plug jumpers for precise measurements and connections.

MSAS02

View

AutoEdu MSAS01 Lighting Educational Trainer

AutoEdu MSAS01 Lighting Educational Trainer 2

TRAINING & EDUCATION SYSTEMS

MSAS01 Lighting Educational Trainer (OBD 16 Pin)

MSAS01

◆ Fully functional system◆ Open contacts for measuring system components and circuits◆ Diagnosis of the dashboard through OBD 16 pole diagnostic socket

View

AutoEDU MSCR01 Diesel engine control system CR/EDC 15 Educational Trainer

TRAINING & EDUCATION SYSTEMS

AutoEDU MSCR01 Diesel engine control system CR/EDC 15 Educational Trainer

◆ Explore our cutting-edge Common Rail trainer featuring the Bosch EDC 15C3-4.1 engine control system, seamlessly integrated into a mobile aluminum frame. This specialized training board-simulator is meticulously crafted to enhance the comprehension of diesel injection Common Rail systems for technical students.Key Features:◆ Fully functional Common Rail...

MSCR01

View

TRAINING & EDUCATION SYSTEMS

BeeWave Modular RF Prototyping & Education Platform