EM-3350 Cutaway Model of Electrical Machine

EM-3350 Cutaway Model of Electrical Machine

EM-3350 Cutaway Model of Electrical Machine

EM-3350 Cutaway Model of Electrical Machine

EM-3350 Cutaway Model of Electrical Machine

EM-3350 Cutaway Model of Electrical Machine

EM-3350 Cutaway Model of Electrical Machine

Reference: EM-3350 - Manufacturer: KandH

Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entire length for an optimum view of the internal construction of the machine and it is still operating. The cutaway surfaces are protected against corrosion.

Overview
Data Sheet

Category: Power Electronics

16 other products in the same category:

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model 2

TRAINING & EDUCATION SYSTEMS

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm...

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

View

Nvis 7058 AC and DC Starter Demostrator Lab

Nvis 7058 AC and DC Starter Demostrator Lab 2

TRAINING & EDUCATION SYSTEMS

Nvis 7058 AC and DC Starter Demostrator Lab

NVIS TECHNOLOGIES

Nvis 7058 AC and DC Starter Demonstrator is designed to explain the basic concepts of AC and DC Starters. A motor starter is a device used with AC and DC electric motors to temporarily reduce the load and torque during startup. It includes an inbuilt AC and DC Starter such as Star Delta Starter, DOL Starter.

View

MSPS EBS D Truck Trailer WABCO EBS D 2S/2M Braking SystemTraining stand

MSPS EBS D Truck Trailer WABCO EBS D 2S/2M Braking SystemTraining stand 2

TRAINING & EDUCATION SYSTEMS

MSPS EBS D Truck Trailer WABCO EBS D 2S/2M Braking System Training stand

The training stand is specially designed to demonstrate pneumatic braking system with electronic EBS system

View

MS-7600 Portable Mechatronics Training System (for PLC-310)

MS-7600 Portable Mechatronics Training System (for PLC-310) 2

TRAINING & EDUCATION SYSTEMS

MS-7600 Portable Mechatronics Training System (for PLC-310)

MS-7600 contains two independent mechatronics training modules. They are automatic sorting robot and linear positioner. These two modules can be controlled by PLC-310 directly or other PLC systems through its digital input and output ports on control panel.

View

Nvis 6002 Electrostatic Lab

Nvis 6002 Electrostatic Lab 2

TRAINING & EDUCATION SYSTEMS

Nvis 6002 Electrostatic Lab

NVIS TECHNOLOGIES

Nvis 6002, Electrostatic Lab is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

ETS-3000

ETS-3000 2

TRAINING & EDUCATION SYSTEMS

ETS-3000 Sistema de entrenamiento Digital-Analógico

ETS-3000 provides an environment for students to interact with the starter tables using simple codes and connections.The universal board allows students to build their own circuits.

View

Nvis 436 Solar Power Generation and Training System

TRAINING & EDUCATION SYSTEMS

Nvis 436 Solar Power Generation and Training System

NVIS TECHNOLOGIES

A unique system for electricity generation and learning A complete solution for learning solar photovoltaic system Provided with meters for analysis of parameters Provided with all safety protections Online product tutorial

View

Scientech2709 Single Phase Controlled Rectifier with Cosine Firing Scheme

Scientech2709 Single Phase Controlled Rectifier with Cosine Firing Scheme 2

TRAINING & EDUCATION SYSTEMS

Scientech2709 Single Phase Controlled Rectifier with Cosine Firing Scheme

SCIENTECH TECHNOLOGIES

Scientech 2709 is a platform which helps Students to understand the various concept of Cosine wave firing scheme for single phase controlled rectifiers.

View

Nvis 726 AC / DC Load

Nvis 726 AC / DC Load 2

TRAINING & EDUCATION SYSTEMS

Nvis 726 AC / DC Load

NVIS TECHNOLOGIES

Nvis 726 AC / DC Load is an important device in all the Electrical laboratories. One can connect a load upto 1.2 KW using this product. The device comes with On Board Switches, so that one can vary the load as required, in steps of 100 W. The product is designed so as to provide load for various experiments of Transformer, Motors, Generators etc.

View

ITS-200series IPv6 Training System

ITS-200series IPv6 Training System 2

TRAINING & EDUCATION SYSTEMS

ITS-200series IPv6 Training System

Explosive growth in network device diversity and mobile communications, along with global adoption of networking technologies, have overwhelmed IPv4 and have driven the development of a next-generation Internet Protocol (IPv6).

View

IVDB1/4 Petrol DOHC Engine ¼ Cutaway Model

IVDB1/4 Petrol DOHC Engine ¼ Cutaway Model 2

TRAINING & EDUCATION SYSTEMS

IVDB1/4 Petrol DOHC Engine ¼ Cutaway Model

View

MSVAZ 1 Wheel Alignment Training Stand

MSVAZ 1 Wheel Alignment Training Stand 2

TRAINING & EDUCATION SYSTEMS

MSVAZ1 Wheel Alignment Training Stand

Using this training stand it is very easy to teach several students at the same time, because all suspension components are visible from all sides. Suspension geometry adjustments are performed like in a real automobile – using screws and tools.

View

Electronic Circuits Lab

Electronic Circuits Lab 2

TRAINING & EDUCATION SYSTEMS

KL-200 Laboratory for Electronic Experiments with Linear Circuits (2)

The KL-200 Linear Circuit Lab(2) - Electronic Circuits Lab is a comprehensive and self-contained system suitable for anyone engaged in electronic circuit experiments.

View

Nvis 6052 Experimentation with Sonometer

Nvis 6052 Experimentation with Sonometer 2

TRAINING & EDUCATION SYSTEMS

Nvis 6052 Experimentation with Sonometer

NVIS TECHNOLOGIES

Nvis 6052, Experimentation with Sonometer is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

Nvis 7006 Laboratory for Three Phase Induction Motor Trainer

Nvis 7006 Laboratory for Three Phase Induction Motor Trainer 2

TRAINING & EDUCATION SYSTEMS

Nvis 7006 Laboratory for Three Phase Induction Motor Trainer

NVIS TECHNOLOGIES

It is designed to explain the students, how total power is measured in a three phase circuit using only 2 wattmeters. With this product, student can study the power flow in 3 phase system and correspondingly calculate Active, Reactive and Apparent power. Apart from this student can easily understand different three phase parameters like Line Voltage, Line...

View

AE410778E Electric power-assisted steering (EPS)

AE410778E Electric power-assisted steering (EPS) 2

Autoedu

AE410778E Electric power-assisted steering (EPS)

◆ Fully operational EPS system integrated with a functional McPherson suspension. This trainer enables precise simulation of vehicle speed (0-120 km/h), adjustment of steering effort directly on the rack, and alternator simulation.

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow