AT-11003 Navigation & Communication Trainer

AT-11003 Navigation & Communication Trainer

AT-11003 Navigation & Communication Trainer

AT-11003 Navigation & Communication Trainer

AT-11003 Navigation & Communication Trainer

AT-11003 Navigation & Communication Trainer

AT-11003 Navigation & Communication Trainer

Reference: AT-11003 - Manufacturer: KandH

The Navigation and Communication Trainer is a basic functional simulation of a standard aircraft avionics system. Besides that, most components in the trainer will be fully functional aircraft components. It is intended for use in avionics / aircraft electronics curriculum and is aimed at providing students with hands-on experience in aircraft avionics.

1. It is designed to provide practical, hands-on instruction in aircraft electronics and avionics.
2. The Trainer is equipped with testing wireless signal.
3. The Trainer comes with Fault Simulation Panel for conduct of training on troubleshooting. Panel allows the simulation of faults for enhanced learning.

Category: Aviation

Download (216.71KB)

16 other products in the same category:

AD-13 AD Series (2854 TIE- Points)

AD-13 AD Series (2854 TIE- Points) 2

TRAINING & EDUCATION SYSTEMS

AD-13 AD Series (2854 TIE- Points)

AD Series include AD-4D, AD-100, AD-101, AD-102, AD-10, AD-01, AD-11, AD-12, AD-13 and AD14.

View

AE45440M Overhead Camshaft (OHC) Engine Cut Off Educational Trainer

New

TRAINING & EDUCATION SYSTEMS

AE45440M Overhead Camshaft (OHC) Engine Cut Off Educational Trainer

El entrenador educativo de 4 tiempos de gasolina (gasolina) cuenta con cuatro cilindros en línea y un sistema de árbol de levas (OHC) en la parte superior. El motor está seccionado para mostrar todos los componentes esenciales, incluyendo válvulas, árbol de levas, pistones, cigüeñal, circuitos de lubricación, sistema de combustible y sistema de...

View

Scientech2710 Single Phase Converter Firing Techniques

Scientech2710 Single Phase Converter Firing Techniques 2

TRAINING & EDUCATION SYSTEMS

Scientech2710 Single Phase Converter Firing Techniques

SCIENTECH TECHNOLOGIES

Scientech 2710 is a learning platform which helps Students to understand the concept of TCA785 firing scheme and Triangular comparator firing scheme for performing the single phase controlled rectifiers.

View

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model 2

TRAINING & EDUCATION SYSTEMS

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm...

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

View

ScientechITSPLC Industrial Trainers

ScientechITSPLC Industrial Trainers 2

TRAINING & EDUCATION SYSTEMS

ScientechITSPLC Industrial Trainers

SCIENTECH TECHNOLOGIES

ScientechITSPLC

Scientech ITS PLC Professional Edition presents five training systems based on real world industrial scenarios. Each system offers standard problems found in PLC programming. The systems are presented in order of increasing level of difficulty.

View

Power Electronics Training System

Power Electronics Training System 2

TRAINING & EDUCATION SYSTEMS

PE-5000 Power Electronics Training System

CE CERTIFIED ◆ The PE-5000 System is the combination of power, electronics andcontrol.◆ It has wide range of applications, from solid-state electronicsto the control & conversion of electric power.◆ Popular circuits of power electronics contain rectifiers, choppers and inverters.◆ The experimental modules include converters, a power supply,load and...

View

Nvis 6509C Techbook for Understanding Network Theorems

Nvis 6509C Techbook for Understanding Network Theorems 2

TRAINING & EDUCATION SYSTEMS

Nvis 6509C Techbook for Understanding Network Theorems

NVIS TECHNOLOGIES

Nvis 6509C Techbook for Understanding Network Theorems is a compact, ready to use experiment board and has been designed specifically for the study & verification of network theorems in DC circuits. In network analysis, the fundamental rules are ohm`s law and Kirchhoff`s laws. These laws may be applied to analyze any circuit configuration but for...

View

Nvis3302A RoboCar

Nvis3302A RoboCar 2

TRAINING & EDUCATION SYSTEMS

Nvis 3302A RoboCar

NVIS TECHNOLOGIES

Nvis 3302A, RoboCar is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

NGT-503 2-in-1 Remote Bot

NGT-503 2-in-1 Remote Bot 2

TRAINING & EDUCATION SYSTEMS

NGT-503 2-in-1 Remote Bot

faya - nugget Creative InnovationNot sure where to start with faya - nugget?With our mini projects, you can build your own Brick interactive device with faya - nugget!

View

Nvis 6505 Laboratory for Experimentation with Hartley and Colpitt Oscillator

Nvis 6505 Laboratory for Experimentation with Hartley and Colpitt Oscillator 2

TRAINING & EDUCATION SYSTEMS

Nvis 6505 Laboratory for Experimentation with Hartley and Colpitt Oscillator

NVIS TECHNOLOGIES

Nvis 6505 Laboratory for Experimentation with Hartley and Colpitt Oscillator is an elite training system for the analog electronics laboratories. It is useful in understanding the basic concepts and functioning of both Hartley and Colpitt Oscillators, and their use in generation of Sinusoidal Waveform. The trainer describes the complete designing of the...

View

Nvis 7025A TechBook for Understanding Calibration of Energy Meter

Nvis 7025A TechBook for Understanding Calibration of Energy Meter 2

TRAINING & EDUCATION SYSTEMS

Nvis 7025A TechBook for Understanding Calibration of Energy Meter

NVIS TECHNOLOGIES

Nvis7025A energy meter calibration equipment provides in-depth knowledge of Energy meter measurements and its calibration using Voltmeter, Ammeter, and Wattmeter. It has two displays, one is Standard and another is Energy-mete

View

Nvis 7014 DC Series Machine Lab

Nvis 7014 DC Series Machine Lab 2

TRAINING & EDUCATION SYSTEMS

Nvis 7014 DC Series Machine Lab

NVIS TECHNOLOGIES

This product includes experiments such as operating characteristic and speed controlling of DC Series Machine. Students can get aware of the methods through which the speed of the DC Series Motor can be controlled. The training system includes terminals for Rheostat and Starters so that these devices can be connected externally to the panel.

View

Nvis 4502 Laboratory for Ferro Fluid Demonstrator

Nvis 4502 Laboratory for Ferro Fluid Demonstrator 2

TRAINING & EDUCATION SYSTEMS

Nvis 4502 Laboratory for Ferro Fluid Demonstrator

NVIS TECHNOLOGIES

Nvis 4502 Ferro Fluid Demonstrator shows how magnetic properties can exist in fluid state.

View

Nvis 651-Nvis 654

Nvis 651-Nvis 654 2

LIGHT & LASER SOURCES

Nvis 651 Incandescent Light Source 150W

NVIS TECHNOLOGIES

Nvis 651 Incandescent Light Source is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

Training System for Engines and Electric Machines

Training System for Engines and Electric Machines 2

TRAINING & EDUCATION SYSTEMS

EM-3350 Electrical Machines & Motors Training System

CE CERTIFIED Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entirelength for an optimum view of the internal construction of the machine and it is still operating. The cutawaysurfaces are protected against corrosion. An attached pdf shows the EM-3350 cutaway motor models

View

MB-85 Multi-Board

MB-85 Multi-Board 2

TRAINING & EDUCATION SYSTEMS

MB-85 Multi-Board

Multi-board MB-85 1. Easy and fast prototyping with surface mount chip carriers2. Eliminates time-consuming soldering3. Compatible with K&H solderless breadboard

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow