Nvis 35D Nvisduino Based ZigBee Development Platform

The Nvisduino is intended for wireless applications. The user can upload codes with an USB cable, or by using a modified USB-to-XBee adaptor such as Nvisduino Tx (base) the user can upload program through wireless using Xbee S1. It is an ideal platform to implement and test the designs both for the beginners and the experts. Using this platform a range of projects in various domains like wireless communication, robotics, consumer electronics, etc can be done.

Nvis 35D Nvisduino Based ZigBee Development Platform is an ideal platform to enhance education, training, skills & development amongs our young minds.

• Features:

- ATmega328P MCU clocked at 8MHz
- USB boot loader to program ATmega328P device
- Wireless programming via Xbee module (Series 1 only)
- On board ISP connector for PC based programming
- Every pin is marked in order to make work easier
- Master Reset/Restart Key for hardware reset
- Supply from USB/External Supply/ battery
- LED indication for various operation
- Rich Online Learning material

- Microcontroller: ATmega328P
- Operating Voltage: 3.3V
- Input Voltage: 3.35-5V
- Input Voltage for charge: 3.5-5V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog input pins: 8
- DC Current per I/O pin: 40mA
- Flash Memory: 32KB (of which 2KB used by boot loader)
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 8MHz
- Xbee module:
            -- Indoor/Urban range: up to 100 ft. (30m) S1
                                                up to 133 ft. (40m) S2
            -- Outdoor RF line-of-sight range: up to 300 ft. (100m) S1
                                                                  up to 400 ft. (120m) S2
            -- Transmit Power Output: 1mW (0dbm) S1
                                                       2mW (+3dbm) S2
            -- RF data rate: 250 Kbps
            -- Supply Voltage: 2.8 - 3.4V
            -- Transmit Current (typical): 45mA (@ 3.3V) S1
                                                          40mA (@ 3.3V) S2
            -- Idle/Receive Current (typical): 50mA (@ 3.3V) S1
                                                                40mA (@3.3V) S2
            -- Frequency: ISM 2.4GHz
            -- Dimensions: 0.0960" x 1.087"
            -- Operating Temperature: -40° to 85° C
            -- Antenna Type: Wire
            -- Network topologies: Point to point, Star, Mesh (with DigiMesh   
                firmware)
- Ordering Code:
            -- Nvisduino: Nvis 35D
            -- Nvisduino node: Nvis 35DN
            -- Nvisduino base: Nvis 35DB
            -- Xbee module (S1): Nvis 35DXbee S1
            -- Xbee module (S2): Nvis 35DXbee S2
- Optional:
            -- Li-ion battery: 3.7 V

- Learn the concept of Arduino IDE
- Learn the concept of Wireless Zigbee communication
- Learn to interface Xbee module
- Learn to interface AVR series microcontroller
- Learn to develop wireless applications
- Learn to design Wireless Sensor network