No products
Prices are tax excluded
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
List of products by manufacturer MAE srl
-
CTS120 Thermal Conductivity Sensor
CTS120 is a probe to measure in soils, length: 120 cm, which allows to carry out practical and quick measurements of thermal conductivity (or thermal resistivity) in the medium in which it is inserted at a precise level.
-
-
-
FRT-100 Water level indicator with temperature sensor and down-hole indicator (100m)
Water level indicator with temperature sensor and down-hole indicator.
-
FRT-50 Water Level Indicator with Temperature Sensor and Bottom-Hole Indicator (50m)
Model FRT-50 - Water Level Indicator With Temperature Sensor and Bottom-Hole Indicator
-
GH45 Horizontal Geophone 4.5 Hz
Horizontal geophone 4.5 Hz with 1 mt cable, level bubble, double clip or split-spring (single spring) connector available upon request.
-
KX612EM48 Electrode kit for V.H.R. Electrical Tomography and V.E.S. (48 Channels)
The kit includes everything necessary to perform very high resolution (24-bit resolution) geoelectric surveys through the multi-electrode method in multichannel mode, which drastically reduces the recording time in 3D studies. The instrument can manage 48 electrodes without using expansion boxes. The kit includes everything necessary for V.E.S. Surveys...
24 900,00 € -
KX612EM72 Electrode kit for V.H.R. Electrical Tomography and V.E.S. (72 Channels)
The kit includes everything necessary to carry out geoelectrical surveys with V.H.R. (Very high resolution - resolution: 24 bit) multielectrode in multichannel mode that allows to drastically reduce the recording time in 3D surveys. The instrument can manage 72 electrodes without using expansion boxes. The kit also includes all accessories and data...
29 900,00 € -
KX612EM96 Electrode kit for V.H.R. Electrical Tomography and V.E.S. (96 Channels)
The kit includes everything necessary to carry out geoelectrical surveys with V.H.R. (Very high resolution - resolution: 24 bit) multielectrode in multichannel mode that allows to drastically reduce the recording time in 3D surveys. The instrument can manage 96 electrodes without using expansion boxes. The kit also includes all accessories and data...
-
MAE C313SEV Georesistivimeter for Quadrupole measurements
Georesistivimeter for quadrupole measurements
-
MAE ET300 Multichannel Georesistivimeter 24-48 Channels
STRENGTHS:► Parallelization of measurements for pole-dipole, pole-pole, dipole-dipole and three-dimensional configurations► 24-bit resolution► Pseudosection in real time ► Allows VES and tomography surveys.
-
MAE X824S Seismograph 24 / 96 channels - 24 bit
The X824S is a top-range seismograph equipped with 24 to 96 embedded channels for both active and passive seismic surveys. The basic configuration starts with 24 channels and can be expanded in 24-channel increments, up to a maximum of 96 integrated channels, without requiring external boxes. The instrument features a built-in PC with a 10” monitor...
-
ST3 Seismograph with integrated 3D sensor 2 Hz frequency, 3 channel 24 bit
ST3 integrates within an acquisition board equipped with 3 channels with 24 bit resolution for each channel and a 3D sensor with geophones with a natural frequency of 2 Hz.The instrument is managed via a laptop or tablet PC connected to the instrumentation via a USB connection.
-
TCR24 DATA ACQUISITION SYSTEM FOR SOIL THERMAL CONDUCTIVITY
Metodology: Ground thermal conductivityTCR24 is designed to measure soil heat transmission (soil tendency to transmit heat).This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. 2 years warranty.Measurement can be done on site...
-
VMR624 Stand Alone Seismograph, 6 channels, 24 bit
Dynamic surveys on structures Seismic vibration monitoring
-
WCH-4 Wireless modular Prospecting system for cross-hole on foundations poles
WCH4 is an innovative modular wireless instrument for cross-hole tests on foundation poles. The cross-hole is a method to analyze the foundation poles of buildings that, with the use of ultra-sounds, crosshole, allow to carry out an accurate high resolution test. An ultra-sonic wave is sent from a transmitter to a receiver, which are convoyed...
