AT-11007 Avionics Trainer

AT-11007 Avionics Trainer

AT-11007 Avionics Trainer

AT-11007 Avionics Trainer

AT-11007 Avionics Trainer

AT-11007 Avionics Trainer

AT-11007 Avionics Trainer

Reference: AT-11007 - Manufacturer: KandH

The Avionics Trainer is available for performing complete functional simulation of a standard aircraft avionics system. Besides that, can be used for providing hands-on training for the students to attain a good understanding of the operating principles of various instruments.

1. Includes a complete, real and modern aircraft cockpit instruments.
2. Student could experience the exact operation of aircraft cockpit instruments via the external ramp testers.
3. The Avionics Trainer comes with Fault Simulation Panel for conduct of training on troubleshooting. Panel allows the simulation of faults for enhanced learning

Category: Aviation

Download (6.05MB)

16 other products in the same category:

Nvis 7040 Single Phase Bridge Converter Drive

Nvis 7040 Single Phase Bridge Converter Drive 2

TRAINING & EDUCATION SYSTEMS

Nvis 7040 Single Phase Bridge Converter Drive

NVIS TECHNOLOGIES

Nvis 7040 Single Phase Bridge Converter Drive is an Elite Training System for Power Electronic Lab to demonstrate the operational functioning of Single Phase Bridge Converter. It includes experiment such as speed control of DC Motor by using full wave SCR configuration. It helps students to know how to generate firing pulses for single phase converter...

View

Nvis3302A RoboCar

Nvis3302A RoboCar 2

TRAINING & EDUCATION SYSTEMS

Nvis 3302A RoboCar

NVIS TECHNOLOGIES

Nvis 3302A, RoboCar is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

Solar Cell Trainer

Solar Cell Trainer 2

TRAINING & EDUCATION SYSTEMS

GES-100 Solar Cell Trainer System

SOLAR CELL TRAINER - for educational teaching, training, and learning of green energy technology, solar cell energy to electricity conversion, photovoltaic characteristics, etc...

View

MC07 TTL I/O Interface Module

MC07 TTL I/O Interface Module 2

TRAINING & EDUCATION SYSTEMS

MC07 TTL I/O Interface Module

NVIS TECHNOLOGIES

MC07 TTL I/O Interface Module enables the students and practicing engineers to gain invaluable practical experience of the principles and applications of a Microcontroller. The aim is to program an external controller for performing experiments like combination controller (AND, OR, XOR and NOT operations), sequential controller, programmable counter,...

View

Scientech2472 Temperature Measuring Workbench

Scientech2472 Temperature Measuring Workbench 2

TRAINING & EDUCATION SYSTEMS

Scientech2472 Temperature Measuring Workbench

SCIENTECH TECHNOLOGIES

The workbench to measure the temperature Scientech 2472 consists of an instrument panel and a work area. This system is composed of the latest components, which reflect the latest technological innovations in this field. The workbench for measuring temperature allows students and industry professionals to understand the concepts and operation of...

View

MS-7400 Portable Mechatronics Training System (for MCU)

MS-7400 Portable Mechatronics Training System (for MCU) 2

TRAINING & EDUCATION SYSTEMS

MS-7400 Portable Mechatronics Training System (for MCU)

MS-7400 provides two independent mechatronics training modules. They are automatic sorting robot and linear positioner. These two modules can be controlled by MS-C100 directly or other microcontrollers through its digital input and output ports on control panel.

View

HBE-Robonova AI II Humanoid Robot

HBE-Robonova AI II Humanoid Robot 2

TRAINING & EDUCATION SYSTEMS

HBE-Robonova AI 3 Humanoid Robot

SCIENTECH TECHNOLOGIES

HBE-Robonova AI 3

HBE-Humanoid AI 3 Robot is an Intelligent 16-joint Biped Robot which includes an embedded processor executing intelligent algorithms, FPGA recognition board of high-resolution, CCD image acquisition and Image Processing, and a controller board controlling 32 servo motors simultaneously.

View

Scientech2711 Lamp Dimmer

Scientech2711 Lamp Dimmer 2

TRAINING & EDUCATION SYSTEMS

Scientech2711 Lamp Dimmer

SCIENTECH TECHNOLOGIES

Scientech 2711 is a comprehensive learning platform which is very useful for Students to understand the application of Thyristor in intensity control.

View

Scientech2706 SCR Alarm Circuit

Scientech2706 SCR Alarm Circuit 2

TRAINING & EDUCATION SYSTEMS

Scientech2706 SCR Alarm Circuit

SCIENTECH TECHNOLOGIES

Scientech2706 is a platform which is very useful Students to understand the low voltage application of the SCR in alarm control.

View

KS-350 Jump Wire & Jump Wire Set

KS-350 Jump Wire & Jump Wire Set 2

TRAINING & EDUCATION SYSTEMS

KS-350 Jump Wire & Jump Wire Set

View

MC20GSM Study of GSM Application Module

MC20GSM Study of GSM Application Module 2

TRAINING & EDUCATION SYSTEMS

MC20GSM Study of GSM Application Module

NVIS TECHNOLOGIES

MC20GSM Study of GSM Application Module is built with Dual Band GSM/GPRS engine, and works on 900/ 1800 MHz. The Modem comes with RS232 and USB interface, which allows the user to connect PC as well as microcontroller with UART Interface. The GSM/GPRS Modem has internal TCP/IP stack to enable the user to connect with internet via GPRS. It is suitable for...

View

CI-33001C CPLD / FPGA Prototyping Board

CI-33001C CPLD / FPGA Prototyping Board 2

TRAINING & EDUCATION SYSTEMS

CI-33001C CPLD / FPGA Prototyping Board

View

Nvis3305 RoboLeg

Nvis3305 RoboLeg 2

TRAINING & EDUCATION SYSTEMS

Nvis 3305 RoboLeg

NVIS TECHNOLOGIES

Nvis 3305, RoboLeg is an ideal platform to enhance education, training, skills & development amongs our young minds.

View

MC04 Display Module

MC04 Display Module 2

TRAINING & EDUCATION SYSTEMS

MC04 Display Module

NVIS TECHNOLOGIES

MC04 Display Module is a learning platform to study the working of displays used for industrial applications. MC04 has been designed to demonstrate the applications of Nvis Microcontroller development platforms. The object is to connect and program a Microcontroller to display data and monitoring. Contrast and backlight control are provided on the module.

View

Nvis 7038 Cut Section of Machines

Nvis 7038 Cut Section of Machines 2

TRAINING & EDUCATION SYSTEMS

Nvis 7038 Cut Section of Machines

NVIS TECHNOLOGIES

Cut Section of Machines is an important part for all Electrical laboratories. Study of these machines is integral part of any educational course in Engineering. Student can easily understand various parts and operation of these machines with the help of these running cut section.

View

Nvis 436T Solar energy formation and generation system.

Nvis 436T Solar energy formation and generation system. 2

TRAINING & EDUCATION SYSTEMS

Nvis 436T Solar Power Generation and Training System

NVIS TECHNOLOGIES

• A unique Solar system for electricity generation.• Provided with meters for analysis of parameters• Provided with all safety protections• Connector Sheathed Shock proof type• DC Voltmeter & DC Ammeter• Multi Function Meter

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow