View larger

PS-1000 Pneumatic Training System

Reference PS-1000

Manufacturer: KandH

Condition: New

The “PS-1000” is launched to offer enriched knowledge from basic air pressure components, advanced air-pressure loop design to PLC-based electrical control system. The trainee can prepare themselves to be a high-level automation engineer with the help of the “PS-1000” trainer system.

More info about this product.

Share on Facebook!
Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

Overview
List of Experiments

It is well known that “Factory Automation” is an indispensable measure to reduce labor cost, improve production efficiency and achieve higher product quality. It is widely adopted by electronic, semiconductor, LCD and mechanical factories. In factory automation, “air pressuring” plays a very essential and critical role.

1. Improvement on trainees’ familiarization of the principles and applications of various air pressure components.

2. Demonstration of air-pressure loop design.

3. Training of PLC programming, including architecture, instructions and ladder diagram.

PART I : Basic Pneumatic Components

1. Single-Acting Air Cylinder
2. Double-Acting Air Cylinder
3. OR Valve
4. Flow Control Valve
5. Quick-Exhaust Valve
6. AND Valve
7. Directional Control Valves
8. Sequence Valve
9. Time-Delay Valve

PART II : Basic Pneumatic Control Circuits

1. Two-Hand Safety Circuit
2. Single-Acting Air Cylinder Remote Control
3. Double-Acting Air Cylinder Remote Control
4. Air Cylinder Manual Control Advance and Pressure Control Reverse
5. Air Cylinder Manual Control Advance and Delayed Reverse
6. Air Cylinder Two-Hand Control Advance and Automatic Reverse
7. Air Cylinder Slow Advance and Rapid Reverse
8. One-Cycle Reciprocation of Double-Acting Air Cylinder
9. Emergency Stop Circuit
10. Interlocking Start Switch Circuit
11. Two Air Cylinders used in Parts Bending Process
12. Sequence Control of Two Air Cylinders
13. Air Cylinder used in Machining Process
14. Three Air Cylinders used in Material Loading and Drilling
15. Sequence Control of Three Air Cylinders

PART III : Electro-Pneumatic Sequence Control Circuits

1. One-Cycle Cylinder Reciprocation using a Pushbutton and Single-Solenoid Valve
2. One-Cycle Cylinder Reciprocation using Pushbuttons and Single-Solenoid Valve
3. One-Cycle Cylinder Reciprocation using Limit Switch and Single-Solenoid Valve
4. Continuous Cylinder Reciprocation using Limit Switches and Single-Solenoid Valve
5. One-Cycle Cylinder Reciprocation using Timer and Single-Solenoid Valve
6. Continuous Cylinder Reciprocation using Timer and Single-Solenoid Valve
7. Cylinder Advance/Reverse Control using a Pushbutton and Single-Solenoid Valve
8. One-Cycle Cylinder Reciprocation using Pushbuttons and Double-Solenoid Valve
9. One-Cycle Cylinder Reciprocation using Limit Switch and Double-Solenoid Valve
10. Continuous Cylinder Reciprocation using Limit Switches and Double-Solenoid Valve
11. One-Cycle Cylinder Reciprocation using Timer and Double-Solenoid Valve
12. One-Cycle Cylinder Reciprocation using Timer, Limit Switch and Double-Solenoid Valve
13. Continuous Cylinder Reciprocation using Timer, Limit Switches and Double-Solenoid Valve
14. Cylinder Advance/Reverse Control using a Pushbutton and Double-Solenoid Valve
15. Two-Cylinder Sequencing (A+B+B-A-) using Single-Solenoid Valves
16. Two-Cylinder Sequencing (A+A-B+B-) using Single-Solenoid Valves
17. Two-Cylinder Sequencing (A+A-B+B-) using Double-Solenoid Valves
18. Two-Cylinder Sequencing (A+B+/Timing/A-B-) using Single-Solenoid Valves
19. Two-Cylinder Sequencing (A+B+/Timing/A-B-) using Double-Solenoid Valves
20. Three-Cylinder Sequencing (A+B+C+C-B-A-) using Single-Solenoid Valves
21. Three-Cylinder Sequencing (A+A-B+C+B-C-) using Single-Solenoid Valves
22. Pressure Switch Uses