Materials for Fuel Cells

Fuel Cells

Membrane Electrode Assemblies (MEA)

GDL's

Electrodes

Membranes for Fuel Cells

Gasketing

Fuel Cells & Individual Cells for SOFC

Equipment

Substrates

Inks

Powders for electrolyte, cathode and anode

Catalysts

Proton Exchange Membrane Fuel Cell w/MEA, AO-EFC-01-50

Fuel Cell Accessories

PEM fuel cell hardware with Serpentine flow pattern & conditioned MEA, AO-EFC-01...

ELECTROCHEM INC.

AO-EFC-01

Proton Exchange Membrane Fuel Cell with MEA.

View

Catalysts

Platinum Catalyst (Basf) - Ref.: AO-590078

AO-Electronics

AO-590078

◆ The viability of many electrochemical processes has significantly increased by the ability to prepare well dispersed, high surface area electrocatalysts containing platinum. ◆ This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures.

View

Carbon Paper Electrodes 2 mg/cm² Platinum-Ruthenium Black - AO-1610041

Various

AO-11060036 - Carbon Paper Electrodes 2 mg/cm² Platinum-Ruthenium Black

AO-Electronics

AO-11060036

€380.00

This 2.0mg/cm² Platinum Ruthenium on Carbon Paper is the most popular Gas Diffusion Electrode (GDE) for use in Direct Methanol Fuel Cells (DMFC).The Platinum Ruthenium (PtRu) catalyst is designed to facilitate the Methanol reaction to create an efficient DMFC.

View

Membrane Fumasep FAS-PET-75 - Ref.: AO-5041615

Fuel Cell Accessories

Membrane Fumasep FAS-PET-75 - Ref.: AO-5041641

AO-Electronics

AO-5041641

View

Gasketing

Silicone Gasketing - 12" x 12" - Ref.: AO-590363

AO-Electronics

Ref.: AO-590363

View

AO-Electronics

Hydrogen Air CCM - 3 Layer MEA Ref.: AO-2014010

AO-Electronics

AO-2014010

View

GDL's

CT Carbon Cloth with MPL - W1S1011 - Ref.: AO-1596054

AO-Electronics

AO-1596054

CT is a woven carbon cloth with a Microporous Layer (MPL). It has a total thickness of 410 um (microns). CT is a great low-cost alternative to conventional woven carbon cloth Gas Diffusion Layer (GDL) materials.

View

NORECS

Ceramic-Oxide-Powders - Ceramic oxide powders

NorECs

Ceramic-Oxide-Powders

Ceramic oxide powders: Standard quantities between 100 g and 10 kg are available. Other quantities are upon request.

View

Inks

Nickel metallic anode ink

SKU:231001

Our nickel ink is an excellent contact paste for SOFC testing, and is especially good for improving electrical contact on the anode side of a cell during the fuel cell test.

View

Substrates

GDC10-2.0 substrate button (20mm)

GDC10-2.0

A slight discoloration may be typical in these substrates, but does not affect the electrochemical performance of the substrate.

View

Equipment

Test accessory kit 10 cm x 10 cm

Kit- 10 cm x 10 cm

We offer standard size SOFC test fixtures. The 10 cm x 10 cm test attachment adapts to both the standard anode and the electrolyte cells with supports of 100 cm2 and active areas of 81 cm2.

View

AEB-5 Anode Electrolyte Planar Bi-Layer (Minimum Qty: 5)

Fuel Cells

AEB-5 Anode Electrolyte Planar Bi-Layer

Fuel Cell Materials

AEB-5

Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation. Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)

View

Xion ™ PEM-Nafion-1000-05 Membrane - AO-72600082

Membranes for Fuel Cells

Xion ™ PEM-Nafion-1000-05 Membrane - AO-72600082

AO-Electronics

AO-72600082

The AO-72600082 Xion™ Composite PEM-Nafion-1000-05 is a 5 micrometers thick composite proton exchange membrane that uses the Nafion resin with an equivalent weight of 1000. It is stable under acidic and neutral conditions. This membrane can be used in fuel cells, electrolyzers, electrodialysis, redox flow batteries, electrochemical compressors, sensors,...

View

Catalysts

Platinum Black - High Surface Area Catalyst - Ref.:AO-590079

AO-Electronics

AO-590079

The PK Catalyst's high surface area platinum black catalyst allows the formation of highly uniform electrode structures and has excellent electrochemical performance.

View

Gasketing

Ref.: 592863 Teflon gasket - 30 x 30 cm (SKU 99030007)

AO-Electronics

592863

This 592863 PTFE (PolyTetraFluoroEthylene) film made with Teflon® fluoropolymer will not compress under pressure, is durable and easy to remove.

View

AO-Electronics

Alkaline Cloth Electrode 0.03 mg/cm² 20% Platinum on Vulcan - AO-72500500

AO-Electronics

AO-72500500

The low-cost electrode AO-72500500 is engineered for anion exchange membrane fuel cells. It can also be used for alkaline fuel cells or batteries with liquid electrolyte (flow-through or static). This electrode is comprised of a standard woven carbon cloth substrate and a carbon supported platinum electrocatalyst.

View

AO-Electronics

Hydrogen Air MEA - 5 Layer Ref.: AO-7201002

AO-Electronics

AO-7201002

These Hydrogen Air MEAs are 5-Layer Membrane Electrode Assembly (MEA) with integrated Gas Diffusion Layers (GDL) for use in Hydrogen/Air Fuel Cells.

View

GDL's

Carbon Fiber Fabric Panex PW03 - Ref.: AO-625306

AO-Electronics

AO-625306

Zoltek Carbon Fiber

View

Substrates

GDC substrate button (25mm)

GDC10-2.5

A slight discoloration may be typical in these substrates, but does not affect the electrochemical performance of the substrate.

View

Equipment

Kit-Colector Test Current Collection Kit 28 cm2

Kit-Colector

The current collection kits consist of platinum or silver meshes together with the Pt voltage tap cable used in the 28 cm2 cell test collector. These items age with exposure to high temperatures and cellular fuel materials, we recommend replacing these items after 5 experiments to ensure that the quality of your data stays at its highest possible levels.

View

Fuel Cells

AEB-2.0 Anode Electrolyte Button Bi-Layer

Fuel Cell Materials

AEB-2.0

Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low-temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation.Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)

View

AO-Electronics

Platinum on Carbon XC-72 Fuel Cell Catalyst

AO-Electronics

XC-72

Fuel Cell Catalyst

View

Gasketing

Mylar Laminate (Self-Adhesive) Gasket - 9" x 10" - Ref.: AO-590143

AO-Electronics

AO-590143

The AO-590143 Mylar® Gasket is a DuPont® developed and manufactured oriented, multi-use, versatile polyester (PET) film.

View

Build your own Fuel Cells: 5L MEA 10cm² - Ref.: 590710

Membrane Electrode Assemblies (MEA)

Build your own Fuel Cells: 5L MEA 10cm² - Ref.: AO-590710

AO-Electronics

AO-590710

5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells. AO-MEA-5L

View

GDL's

ELAT - Hydrophilic Plain Cloth - Ref.: AO-1591002

AO-Electronics

- Ref.: AO-1591002

The ELAT Hydrophilic Plain Carbon Cloth gas diffusion layers are excellent for flow batteries.The excellent tensile and interlaminar shear strengths prevents fabric wrinkling.Hydrophilic ELAT is designed specifically for liquid type electrochemical reactors.The thickness of this GDL is 406 um.

View

Substrates

Hionic-5 Planar Substrate (5x5cm)

Hionic-5

The patented scandia doped the zirconia-based substrate for research on SOFC anode and cathode materials from medium to high temperature (700-900 ° C). The Hionic ™ offers high strength for manufacturing along with high conductivity to distinguish subtle differences between different electrode materials.

View

Equipment

Kit-Current collector test accessory 5 cm x 5 cm

Kit-Corriente5x5cm

The current collection kit replaces the current collector screens used in the 5 cm x 5 cm test accessory kit. Included in the kit are 5 meshes for both the anode and the cathode side.

View

Fuel Cells

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm)

Fuel Cell Materials

SECA-2.0

Single electrode button cells use Nexceris’ patent pending high strength, highly conductive HionicTM electrolyte support combined with the NextCellTManode system on one side.This gives researchers a perfect tool for testing anode systems on a very consistent platform. Single electrode button cells come in two standard support sizes, each with a 12.5 mm...

View

Gasketing

Viton Fluoroelastomer Rubber Sheet Gasket - 12" x 12" - Ref.: AO-690200

AO-Electronics

AO-690200

The AO-690200 is a thin gauge (from 0.015” to 0.25” thick) 12” by 12” chemical- resistant Viton rubber with 75A durometer for use in fuel cell test fixtures, particularly for H2/O2 (pressurized or unpressurized), H2/Air (pressurized or unpressurized), and fuel cells that are utilizing liquid electrolytes (such as sulfuric acid or potassium hydroxide,...

View

MEA for Expandable PEM Research Test Cell - 50cm² - Ref.: 550020

Membrane Electrode Assemblies (MEA)

MEA for Expandable PEM Research Test Cell - 50cm² - Ref.: AO-550020

AO-Electronics

AO-550020

View

AO-Electronics

Gas Diffusion Layer Variety GDL Kit - Ref.: AO-590101

AO-Electronics

AO-590101

View

Substrates

Hionic-10 Planar Substrate (10x10cm)

Hionic-10

View

Equipment

Kit-Manifold-28cm2 Test Fixture Kit (Cell Test Manifold Kit)

Kit-Manifold-28cm2

The cell test collector kit (28 cm2) offers a highly effective solution for the testing of individual planar solid oxide fuel cells. The kit contains all the necessary elements to easily assemble the cells with ~ 100 cm2 of substrates. Designed for both short and long term experiments to measure properties such as fuel utilization, thermal gradients,...

View

Fuel Cells & Individual Cells for SOFC

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

NextCell

ASC-2.0

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. Note: The 20mm diameter are for each part of the round button cell, and each cell has an...

View

AO-Electronics

Ref.: 590763 EPDM Rubber Sheet - 12" x 12" (SKU 99030013)

AO-Electronics

590763

Cut your own gaskets out of this 12 inch x 12 inch sheet of high-performance EPDM (Ethylene Propylene Diene Monomer) Rubber.

View

MEA for PEM Research Cell - 5cm² - Ref.: 550025

Membrane Electrode Assemblies (MEA)

MEA for PEM Research Cell - 5cm² - Ref.: AO-550025

AO-Electronics

AO-550025

View

GDL's

Carbon Fiber Felt Variety Kit Felt-Kit - Ref.: AO-590103

AO-Electronics

AO-590103

View

Equipment

Test kit-operation of 5 cm x 5 cm

Kit-operacion5x5cm

The operations kit consists of the items consumed during each use of the 5 cm x 5 cm test manifolds.

View

Fuel Cells & Individual Cells for SOFC

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

NextCell

ASC-2.5

View

MEA PEM-Dyneon-725-05μm-0.5mgPt-Cloth - Ref.: 74810001

Membrane Electrode Assemblies (MEA)

MEA PEM-Dyneon-725-05μm-0.5mgPt-Cloth - Ref.: AO-74810001

AO-Electronics

AO-74810001

XICAT™ Membrane Electrode Assemblies (MEA) are highly durable and they provide ultra-high performance assemblies for use in electrochemical applications due to the use of ultra-thin composite membranes.

View

Fuel Cells & Individual Cells for SOFC

NextCell-2.0 Button Cell Compatible with Electrolyte (20 mm)

NextCell

NextCell-2.0

With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.

View

Direct Methanol Fuel Cell MEA - 5 Layer - Ref.: 590114

Membrane Electrode Assemblies (MEA)

Direct Methanol Fuel Cell MEA - 5 Layer - Ref.: AO-590114

AO-Electronics

AO-590114

Methanol (MeOH) can be utilized directly (without the need for a reformer) with Direct Methanol Fuel Cell (DMFC) Membrane Electrode Assemblies (MEA).It also allows a liquid fuel to be used directly in a fuel cell instead of a gaseous fuel.

View

Fuel Cells & Individual Cells for SOFC

NextCell-2.5 Button Cell Compatible with Electrolyte

NextCell

NextCell-2.5

View

Direct Methanol Fuel Cell MEA - 3 Layers - Ref.: 1141006

Membrane Electrode Assemblies (MEA)

Direct Methanol Fuel Cell MEA - 3 Layers - Ref.: AO-1141006

AO-Electronics

AO-1141006

The DMFC MEA is often useful in lower power applications. The DMFC MEA is a 3-Layer configuration, also known as Catalyst Coated Membrane (CCM).

View

Flat Cell Compatible with NextCell Electrolite (5x5 cm)

Flat Cell Compatible with NextCell Electrolite (5x5 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(5x5 cm) Flat Cell Compatible with Electrolite

NextCell

NextCell(5x5 cm)

View

Reversible Fuel Cell MEA - 3 Layer - Ref.: 1141018

Membrane Electrode Assemblies (MEA)

Reversible Fuel Cell MEA - 3 Layer - Ref.: AO-1141018

AO-1141018

These Reversible Membrane Electrode Assemblies (MEA) AO-1141018 can be used as in an Electrolyzer for Hydrogen production or in Polymer Electrolyte Fuel Cell (PEMFC) for electricity production.

View

Flat Cell Compatible with NextCell Electrolite (4x7 cm)

Flat Cell Compatible with NextCell Electrolite (4x7 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(4x7 cm) Flat Cell Compatible with Electrolite

NextCell

NextCell(4x7 cm)

View

AO-Electronics

Hydrogen Oxygen MEA - 5 Layer, Ref.: AO-590914

AO-Electronics

Ref.: AO-590914

These are 5-Layer Hydrogen Oxygen MEAs.

View

Flat Cell Compatible with NextCell Electrolite (10x10 cm)

Flat Cell Compatible with NextCell Electrolite (10x10 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(10x10 cm) Flat Cell Compatible with Electrolite (10x10 cm)

NextCell

NextCell(10x10 cm)

View

3 Layer MEA - Hydrogen Oxygen, REf.: 1141014

Home

3 Layer MEA - Hydrogen Oxygen, Ref.: AO-1141014

AO-Electronics

Ref.: AO-1141014

View

AO-Electronics

MEA PEM-Dyneon-725-10μm-0.5mg Pt-Cloth, Ref.: AO-74810005

AO-Electronics

Ref.: AO-74810005

The XICAT™ Membrane Electrode Assemblies (MEA's) are highly durable for providing ultra-high performance assemblies in electrochemical applications due to the use of ultra-thin composite membranes.

View

Membrane Electrode Assemblies (MEA)

MEA PEM-Dyneon-725-20μm-0.5mg Pt-Cloth, Ref.: 74810009

AO-Electronics

Ref.: 74810009

Our MEA PEM-Dyneon-725-20μm-0.5mg Pt-Cloth is comprised of the following sub-components:- 20 micrometers thick PEM-Dyneon (EW 725) composite membrane - carbon cloth based gas diffusion electrodes with 0.5 mg/cm2 loading of 60% Pt/C catalysts, both for anode and cathode.

View

Membrane Electrode Assemblies (MEA)

MEA PEM-Dyneon-725-30μm-0.5mg Pt-Cloth, Ref.: AO-74810013

AO-Electronics

Ref.: AO-74810013

The standard MEA is a 5-layer construction with a membrane sandwiched between a gas diffusion electrode and catalyst layer.A second MEA structure is a 3-layer construction known as a catalyst coated membrane (CCM) in which the catalyst is applied directly to the membrane and there are no gas diffusion layers.

View

Showing 1-53 of 53 item(s)