Flat Cell Compatible with NextCell Electrolite (10x10 cm)

Flat Cell Compatible with NextCell Electrolite (10x10 cm)

Flat Cell Compatible with NextCell Electrolite (10x10 cm)

Flat Cell Compatible with NextCell Electrolite (10x10 cm)

NextCell(10x10 cm) Flat Cell Compatible with Electrolite (10x10 cm)

Reference: NextCell(10x10 cm) - Manufacturer: NextCell

With proven performance over several years, the NextCell flat cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the anode and the cathode, and for the calibration of the test device.

Based on Nexceris' patented stabilized zirconium electrolyte support with Hionic ™ 150 micron scandium and modern anode and cathode materials, the NextCell offers high performance in the temperature range of 750 to 850 ° C.

Type of Cells: Electrolites
Electrolyte Supported Cells: 10x10 cm

NextCell User Manual

Download (417.03KB)

9 other products in the same category:

NextCell Button Cell Compatible with Electrolyte

NextCell Button Cell Compatible with Electrolyte 2

Fuel Cells & Individual Cells for SOFC

NextCell-2.0 Button Cell Compatible with Electrolyte (20 mm)

With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.

View

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm)

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm) 2

Fuel Cells

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm)

Fuel Cell Materials

Single electrode button cells use Nexceris’ patent pending high strength, highly conductive HionicTM electrolyte support combined with the NextCellTManode system on one side.This gives researchers a perfect tool for testing anode systems on a very consistent platform. Single electrode button cells come in two standard support sizes, each with a 12.5 mm...

View

AEB-2.0 Anode Electrolyte Button Bi-Layer

AEB-2.0 Anode Electrolyte Button Bi-Layer 2

Fuel Cells

AEB-2.0 Anode Electrolyte Button Bi-Layer

Fuel Cell Materials

Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low-temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation.Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)

View

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm) 2

Fuel Cells & Individual Cells for SOFC

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. (Minimum quantity: 5 units)

View

Flat Cell Compatible with NextCell Electrolite (4x7 cm)

Flat Cell Compatible with NextCell Electrolite (4x7 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(4x7 cm) Flat Cell Compatible with Electrolite

NextCell(4x7 cm)

View

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm) 2

Fuel Cells & Individual Cells for SOFC

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. Note: The 20mm diameter are for each part of the round button cell, and each cell has an...

View

NextCell Button Cell Compatible with Electrolyte

NextCell Button Cell Compatible with Electrolyte 2

Fuel Cells & Individual Cells for SOFC

NextCell-2.5 Button Cell Compatible with Electrolyte

With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.

View

Flat Cell Compatible with NextCell Electrolite (5x5 cm)

Flat Cell Compatible with NextCell Electrolite (5x5 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(5x5 cm) Flat Cell Compatible with Electrolite

NextCell(5x5 cm)

View

AEB-5 Anode Electrolyte Planar Bi-Layer (Minimum Qty: 5)

AEB-5 Anode Electrolyte Planar Bi-Layer (Minimum Qty: 5) 2

Fuel Cells

AEB-5 Anode Electrolyte Planar Bi-Layer

Fuel Cell Materials

Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation. Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow