EPDM Rubber Sheet - 12" x 12"

EPDM Rubber Sheet - 12" x 12"

Ref.: 590763 EPDM Rubber Sheet - 12" x 12" (SKU 99030013)

Reference: 590763 - Manufacturer: AO-Electronics

Cut your own gaskets out of this 12 inch x 12 inch sheet of high-performance EPDM (Ethylene Propylene Diene Monomer) Rubber.

Select Size

You can cut your own gaskets out of this 12 inch x 12 inch sheet of high-performance EPDM (Ethylene Propylene Diene Monomer) Rubber.
It provides an excellent seal for both Hydrogen and Direct Methanol Fuel Cells.

It has greater strength than standard Weather-Resistant EPDM Rubber, these sheets provide better shock-absorbing qualities and longer life. The high-performance EPDM sheet are resistant to sunlight, ozone, and water.

EPDM Rubber is peroxide cured for increased temperature resistance.

Meet ASTM D2000 CA.

Gasket Properties
Durometer	50A (medium) ± 5
Thickness Tolerance	At 1/32" ±0.010", At 1/16" ±0.016", At 3/32" ±0.016", At 1/8" ±0.020", At 3/16" ±0.031", At 1/4" ±0.031"
Tensile Strength (psi)	1500
Temperature Range	-55°F to +300° F

Type of Cells: Gaskets

16 other products in the same category:

AO-500-23 Soil EC Sensor and Soil Salinity Sensor

AO-500-23 Soil EC Sensor and Soil Salinity Sensor 2

AO-Electronics

AO-500-23 Soil EC Sensor and Soil Salinity Sensor

AO-500-23 Dissolved Oxygen(DO) Sensor design based on the principle of fluorescence and high performance through oxygen membrane, with short response time, measurement accuracy, stable performance, etc. It can be widely used in chemical fertilizer, metallurgy, environmental protection water treatment engineering, pharmaceutical, biochemical, food,...

View

AO-200-04 Solar Radiation Sensor

AO-200-04 Solar Radiation Sensor 2

Solar Radiation

AO-200-04 Solar Radiation Sensor (0-5V, 4-20mA or RS485 outputs)

► AO-200-04 Solar Radiation Sensor is designed on basis of optical principle.► It is mainly used for measuring solar radiation within 300-3000nm wavelength.

UA-CASE Submersible PVC Case for Data Loggers HOBO UA Series

UA-CASE Submersible PVC Case for Data Loggers HOBO UA Series 2

Online only

WEATHER S. ACCESSORIES

UA-CASE Submersible PVC Case for Data Loggers HOBO UA Series

PVC Case for HOBO UA Loggers, prepared for extreme conditions. (Does not include data Logger)

AO-6465M-HOBO Davis Rain Gauge with AeroCone™, support for mast mounting & HOBO UA-003 Logger

AO-6465M-HOBO Davis Rain Gauge with AeroCone™, support for mast mounting & HOBO UA-003 Logger 2

Online only

SENSORS & PROBES

AO-6465M-HOBO Davis Rain Gauge with AeroCone™, support for mast mounting & HOBO UA-003...

AO-RDFT/A Humidity and Temperature Transducer with display for Ceiling Mounting

TRANSDUCERS

AO-RDFT/A Humidity and Temperature Transducer with display for Ceiling Mounting

% r.H., g/m³, g/kg, DP °C -30...+70°C, -20...+80°C, 0...+50°C, 0...+100°C output 0-10 V, 4-20 mA

Silicone Gasketing - 12" x 12" - Ref.: AO-590363

Gasketing

Silicone Gasketing - 12" x 12" - Ref.: AO-590363

Ref.: AO-590363

View

AO-SCT27H Transductor (160A - 360A max.) A una Salida 40mA

SENSORS & PROBES

AO-SCT27H Transductor (Input 160A / Output 40mA)

AO-FS1051 Temperature transducer with surface sensor and stainless steel sensor tip, Modbus RTU output

TRANSMITTERS AND TRANSDUCERS

AO-FS1051 Temperature transducer with surface sensor (-40 to + 400°C), Modbus RTU output

-40...+400°C 16 measuring ranges per device output 0-10 V, 4-20 mA DIP-switch-technology optional with LCD-Display protection type IP65 stainless steel contacting block

AO-WDS2E High Resolution & Accuracy Ultrasonic Anemometer

AO-WDS2E High Resolution & Accuracy Ultrasonic Anemometer 2

COMPACT STATIONS & KITS

AO-WDS2THPE Weather Station

AO-WDS2THPE is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor, its specification refer to AO-WDS9E.

View

RK500-07 Turbidity Sensor (Stainless Steel)

RK500-07 Turbidity Sensor (Stainless Steel) 2

SENSORS & PROBES

RK500-07 economic Turbidity Sensor (Stainless Steel 316L)

Certification: CE-EMC, CE-LVD, RoHS, ISO9001

Build your own Fuel Cells: 5L MEA 10cm² - Ref.: 590710

Membrane Electrode Assemblies (MEA)

Build your own Fuel Cells: 5L MEA 10cm² - Ref.: AO-590710

5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells. AO-MEA-5L

View

AO-SCT036TS-D DC output split core current transformer

AO-SCT036TS-D DC output split core current transformer 2

Energy

AO-SCT036TS-D DC output split core current transformer

T-D series DC output split core current transformer (RATED INPUT 300A- 400A- 500A).

View

AO-400-02 Rain and Snow Sensor

SENSORS FOR WEATHER STATIONS

AO-400-02 Rain and Snow Sensor

The rain and snow sensor AO-400-02 is a high sensitivity detector to achieve qualitative detection of rain and snow.

View

Flex-Stak Closed Bipolar Graphite Plate - 10 cm², Ref.: 590335

Various

Flex-Stak Closed Bipolar Graphite Plate - 10 cm², Ref.: 590335

These are closed bipolar graphite plates that can be used as replacement plates for the Flex-Stak Electrochemical Cell.You can also use them as the basis to build your own closed fuel cell.

View

AO-210-01 Iluminance Sensor

AO-210-01 Iluminance Sensor 2

AO-Electronics

AO-210-01 Iluminance Sensor

AO-RDF/A Humidity Transducer without display for Ceiling Mounting (0.. 100 rH)

TRANSDUCERS

AO-RDF/A Humidity Transducer without display for Ceiling Mounting (0.. 100 rH)

0...100% r.H. accuracy ±3% r.H. output 0-10 V, 4-20 mA heating function for condensation protection

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow