AO-Electronics

AO-ME440 Portable Multifunction Power Analyzer

AO-ME440 Portable Multifunction Power Analyzer 2

Power Analyzers

AO-ME440 Three-Phase Power Analyzer for Rogowski Coils

Portable Multifunction Power Analyzer for Rogowski Coils (includes 4 Rogowski coils to choose from).Three Phase handhel data logger 0.5 class accuracy with 3 nominal current ranges: 600A, 3kA, 6kA.-Voltage, Current, Harmonic, Demand, Power factor, Frequency, Max/Min values, active & reactive & apparent power and energy, Unbalance, Angle. The...

AO-520-04 Multilayer Duct Type Soil Temperature and Humidity Sensor

AO-520-04 Multilayer Duct Type Soil Temperature and Humidity Sensor 2

AO-Electronics

AO-520-04 Multilayer Duct Type Soil Temperature and Humidity Sensor (RS485 o/p)

AO-Electronics

AO-520-04

€1,061.00

CE Compliant

AO-500-23 Soil EC Sensor and Soil Salinity Sensor

AO-Electronics

AO-500-23 Soil EC Sensor and Soil Salinity Sensor

RIKA

AO-500-23

AO-500-23 Dissolved Oxygen(DO) Sensor design based on the principle of fluorescence and high performance through oxygen membrane, with short response time, measurement accuracy, stable performance, etc. It can be widely used in chemical fertilizer, metallurgy, environmental protection water treatment engineering, pharmaceutical, biochemical, food,...

View

Skid Resistance-Floor Slip Tester - Skid-Tester

SENSORS & PROBES

Skid Resistance-Floor Slip Tester - Skid-Tester

Munro Instruments

Skid-Tester

This Portable Skid Resistance Tester is used extensively by safety, maintenance and facility managers.The Munro Stanley Portable Skid Resistance Tester complies in every detail with all relevant international standards. These include: - BS EN 13036-4:2011- BS 7976-1:2002+A1:2013- BS EN 1097-8:2009- BS 812-114:1989- ASTM E303- AS/NZS 4586-2013- AS/NZS...

View

SENSORS & PROBES

"Type K" Thermocouple Sensor Clamp - 40 to + 200 ° C, AO-TC6-K-Clip

AO-Electronics

AO-TC6-K-Clip

€25.00

- Measures Temperature from -40 °C to +200 °C.

SENSORS & PROBES

P118i High Precision Portable Ultrasonic Flowmeter

AO-Electronics

P118i

€4,600.00

Accuracy: 0.5%Repeatability: 0.15% P118 incorporates the latest developments in digital signal processing to deliver highly accurate and repeatable flow measurement for a wide variety of liquids and pipe sizes with bluetooth communication.

MEA 5 y 10 cm2 5L with GDL for use in hydrogen air/oxygen fuel cell

MEA 5 y 10 cm2 5L with GDL for use in hydrogen air/oxygen fuel cell 2

Various

Hydrogen Air MEA - 5 Layer, AO-MEA-5L

AO-Electronics

AO-MEA-5L

5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells.

View

GDL's

CT Carbon Cloth with MPL - W1S1011 - Ref.: AO-1596054

AO-Electronics

AO-1596054

CT is a woven carbon cloth with a Microporous Layer (MPL). It has a total thickness of 410 um (microns). CT is a great low-cost alternative to conventional woven carbon cloth Gas Diffusion Layer (GDL) materials.

View

GDL's

ELAT - Hydrophilic Plain Cloth - Ref.: AO-1591002

AO-Electronics

- Ref.: AO-1591002

The ELAT Hydrophilic Plain Carbon Cloth gas diffusion layers are excellent for flow batteries.The excellent tensile and interlaminar shear strengths prevents fabric wrinkling.Hydrophilic ELAT is designed specifically for liquid type electrochemical reactors.The thickness of this GDL is 406 um.

View

AO-Electronics

Gas Diffusion Layer Variety GDL Kit - Ref.: AO-590101

AO-Electronics

AO-590101

View

GDL's

Carbon Fiber Felt Variety Kit Felt-Kit - Ref.: AO-590103

AO-Electronics

AO-590103

View

AO-Electronics

Hydrogen Air CCM - 3 Layer MEA Ref.: AO-2014010

AO-Electronics

AO-2014010

View

AO-Electronics

Hydrogen Air MEA - 5 Layer Ref.: AO-7201002

AO-Electronics

AO-7201002

These Hydrogen Air MEAs are 5-Layer Membrane Electrode Assembly (MEA) with integrated Gas Diffusion Layers (GDL) for use in Hydrogen/Air Fuel Cells.

View

Build your own Fuel Cells: 5L MEA 10cm² - Ref.: 590710

Membrane Electrode Assemblies (MEA)

Build your own Fuel Cells: 5L MEA 10cm² - Ref.: AO-590710

AO-Electronics

AO-590710

5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells. AO-MEA-5L

View

MEA for Expandable PEM Research Test Cell - 50cm² - Ref.: 550020

Membrane Electrode Assemblies (MEA)

MEA for Expandable PEM Research Test Cell - 50cm² - Ref.: AO-550020

AO-Electronics

AO-550020

View

MEA for PEM Research Cell - 5cm² - Ref.: 550025

Membrane Electrode Assemblies (MEA)

MEA for PEM Research Cell - 5cm² - Ref.: AO-550025

AO-Electronics

AO-550025

View

MEA PEM-Dyneon-725-05μm-0.5mgPt-Cloth - Ref.: 74810001

Membrane Electrode Assemblies (MEA)

MEA PEM-Dyneon-725-05μm-0.5mgPt-Cloth - Ref.: AO-74810001

AO-Electronics

AO-74810001

XICAT™ Membrane Electrode Assemblies (MEA) are highly durable and they provide ultra-high performance assemblies for use in electrochemical applications due to the use of ultra-thin composite membranes.

View

Direct Methanol Fuel Cell MEA - 5 Layer - Ref.: 590114

Membrane Electrode Assemblies (MEA)

Direct Methanol Fuel Cell MEA - 5 Layer - Ref.: AO-590114

AO-Electronics

AO-590114

Methanol (MeOH) can be utilized directly (without the need for a reformer) with Direct Methanol Fuel Cell (DMFC) Membrane Electrode Assemblies (MEA).It also allows a liquid fuel to be used directly in a fuel cell instead of a gaseous fuel.

View

Direct Methanol Fuel Cell MEA - 3 Layers - Ref.: 1141006

Membrane Electrode Assemblies (MEA)

Direct Methanol Fuel Cell MEA - 3 Layers - Ref.: AO-1141006

AO-Electronics

AO-1141006

The DMFC MEA is often useful in lower power applications. The DMFC MEA is a 3-Layer configuration, also known as Catalyst Coated Membrane (CCM).

View

Reversible Fuel Cell MEA - 3 Layer - Ref.: 1141018

Membrane Electrode Assemblies (MEA)

Reversible Fuel Cell MEA - 3 Layer - Ref.: AO-1141018

AO-1141018

These Reversible Membrane Electrode Assemblies (MEA) AO-1141018 can be used as in an Electrolyzer for Hydrogen production or in Polymer Electrolyte Fuel Cell (PEMFC) for electricity production.

View

Gasketing

Silicone Gasketing - 12" x 12" - Ref.: AO-590363

AO-Electronics

Ref.: AO-590363

View

Membrane Fumasep FAS-PET-75 - Ref.: AO-5041615

Fuel Cell Accessories

Membrane Fumasep FAS-PET-75 - Ref.: AO-5041641

AO-Electronics

AO-5041641

View

Carbon Paper Electrodes 2 mg/cm² Platinum-Ruthenium Black - AO-1610041

Various

AO-11060036 - Carbon Paper Electrodes 2 mg/cm² Platinum-Ruthenium Black

AO-Electronics

AO-11060036

€380.00

This 2.0mg/cm² Platinum Ruthenium on Carbon Paper is the most popular Gas Diffusion Electrode (GDE) for use in Direct Methanol Fuel Cells (DMFC).The Platinum Ruthenium (PtRu) catalyst is designed to facilitate the Methanol reaction to create an efficient DMFC.

View

AO-Electronics

Alkaline Cloth Electrode 0.03 mg/cm² 20% Platinum on Vulcan - AO-72500500

AO-Electronics

AO-72500500

The low-cost electrode AO-72500500 is engineered for anion exchange membrane fuel cells. It can also be used for alkaline fuel cells or batteries with liquid electrolyte (flow-through or static). This electrode is comprised of a standard woven carbon cloth substrate and a carbon supported platinum electrocatalyst.

View

Gasketing

Ref.: 592863 Teflon gasket - 30 x 30 cm (SKU 99030007)

AO-Electronics

592863

This 592863 PTFE (PolyTetraFluoroEthylene) film made with Teflon® fluoropolymer will not compress under pressure, is durable and easy to remove.

View

Gasketing

Mylar Laminate (Self-Adhesive) Gasket - 9" x 10" - Ref.: AO-590143

AO-Electronics

AO-590143

The AO-590143 Mylar® Gasket is a DuPont® developed and manufactured oriented, multi-use, versatile polyester (PET) film.

View

Gasketing

Viton Fluoroelastomer Rubber Sheet Gasket - 12" x 12" - Ref.: AO-690200

AO-Electronics

AO-690200

The AO-690200 is a thin gauge (from 0.015” to 0.25” thick) 12” by 12” chemical- resistant Viton rubber with 75A durometer for use in fuel cell test fixtures, particularly for H2/O2 (pressurized or unpressurized), H2/Air (pressurized or unpressurized), and fuel cells that are utilizing liquid electrolytes (such as sulfuric acid or potassium hydroxide,...

View

Catalysts

Platinum Catalyst (Basf) - Ref.: AO-590078

AO-Electronics

AO-590078

◆ The viability of many electrochemical processes has significantly increased by the ability to prepare well dispersed, high surface area electrocatalysts containing platinum. ◆ This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures.

View

Catalysts

Platinum Black - High Surface Area Catalyst - Ref.:AO-590079

AO-Electronics

AO-590079

The PK Catalyst's high surface area platinum black catalyst allows the formation of highly uniform electrode structures and has excellent electrochemical performance.

View

Xion ™ PEM-Nafion-1000-05 Membrane - AO-72600082

Membranes for Fuel Cells

Xion ™ PEM-Nafion-1000-05 Membrane - AO-72600082

AO-Electronics

AO-72600082

The AO-72600082 Xion™ Composite PEM-Nafion-1000-05 is a 5 micrometers thick composite proton exchange membrane that uses the Nafion resin with an equivalent weight of 1000. It is stable under acidic and neutral conditions. This membrane can be used in fuel cells, electrolyzers, electrodialysis, redox flow batteries, electrochemical compressors, sensors,...

View

WEATHER S. ACCESSORIES

AO-HY-DISPLAY Weather Station Console

AO-Electronics

AO-HY-DISPLAY

€390.00

HY-DISPLAY is a powerful console with Embedded real-time operating system taht can work reliably and continuously, without garbage and redundancy. No worries about "system crash".This console is mainly for HongYuv sensors (for free), but it can also becustomized to fit your own 3rd party sensors (with an extra cost).

AO-Electronics

Ref.: 590763 EPDM Rubber Sheet - 12" x 12" (SKU 99030013)

AO-Electronics

590763

Cut your own gaskets out of this 12 inch x 12 inch sheet of high-performance EPDM (Ethylene Propylene Diene Monomer) Rubber.

View

AO-Electronics

Hydrogen Oxygen MEA - 5 Layer, Ref.: AO-590914

AO-Electronics

Ref.: AO-590914

These are 5-Layer Hydrogen Oxygen MEAs.

View

3 Layer MEA - Hydrogen Oxygen, REf.: 1141014

Home

3 Layer MEA - Hydrogen Oxygen, Ref.: AO-1141014

AO-Electronics

Ref.: AO-1141014

View

AO-Electronics

MEA PEM-Dyneon-725-10μm-0.5mg Pt-Cloth, Ref.: AO-74810005

AO-Electronics

Ref.: AO-74810005

The XICAT™ Membrane Electrode Assemblies (MEA's) are highly durable for providing ultra-high performance assemblies in electrochemical applications due to the use of ultra-thin composite membranes.

View

Membrane Electrode Assemblies (MEA)

MEA PEM-Dyneon-725-20μm-0.5mg Pt-Cloth, Ref.: 74810009

AO-Electronics

Ref.: 74810009

Our MEA PEM-Dyneon-725-20μm-0.5mg Pt-Cloth is comprised of the following sub-components:- 20 micrometers thick PEM-Dyneon (EW 725) composite membrane - carbon cloth based gas diffusion electrodes with 0.5 mg/cm2 loading of 60% Pt/C catalysts, both for anode and cathode.

View

Showing 145-180 of 226 item(s)