GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

GUF-1000L Fixed Type Ultrasonic Flow Meter

Reference: GUF-1000L - Manufacturer: Great Instruments

◆ It is a wall-mount, clamp- on type ultrasonic flow meter which uses the transfer time technology.
◆ Designed using FPGA chip and low-voltage broadband pulse transmission.
◆ Both Clamp on type sensors and Insertion type sensors are available.

► The unit has a 240*128 back lit LCD with 4 line menu display and also clear, user-friendly menu selections make this flow meter more simple and convenient to use.
► Daily, monthly and yearly totalized flow is indicated.
► Parallel operation of positive, negative and net flow totalizes with scale factor (span) and BTU ► Capacity while the output of totalized pulse and frequency outputs are transmitted via relay.
► Introduction open collector.

The Sensor measures:: Water Flow
Output Signal:: 4-20 mA
Communication: RS485

GUF-1000L Data Sheet

Download (4.6MB)

16 other products in the same category:

CT-2VA Electrocorder Power Logger and Energy Logger for Industry and Light Commercial

CT-2VA Electrocorder Power Logger and Energy Logger for Industry and Light Commercial 2

FOR ENERGY & ELECTRICITY

CT-2VA Electrocorder Power Logger and Energy Logger for Industry and Light Commercial

One voltage channel 300VacTwo models available, 60Aac or 400Aac range.Complete with Electrosoft energy analysis softwareSealed to IP65/NEMA 12/4 as standard The CT-2VA is a single-phase voltage and current data logger that uses a clip-on CT (current transformer) and plug to connect to the mains supply / equipment you wish to monitor. Setup the Logger...

SQ-420X Apogee PAR Light Sensor with USB Output(Data Logger included)

SQ-420X Apogee PAR Light Sensor with USB Output(Data Logger included) 2

Apogee Instruments

SQ-420X Apogee PAR Light Sensor with USB Output(Data Logger included)

Apogee Instruments

The new SQ-420 is a stand-alone PAR sensor/datalogger with 10,000 measurement internal data storage that can be uploaded to a computer.If continuously connected, the software graphs real-time PPFD (Photosynthetic Photon Flux Density) 4 YEAR WARRANTY

SMR49 Chlorine dioxide analyzer

SMR49 Chlorine dioxide analyzer 2

SENSORS & PROBES

SMR49 Chlorine Dioxide Analyzer for Water Quality

Chlorine Dioxide Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.

View

HD 2013 Rain Gauge

HD 2013 Rain Gauge 2

Delta Ohm (Senseca)

HD2013 – Tipping Bucket Rain Gauge

SENSECA (Delta Ohm)

Tipping bucket rain gauge, area 400 cm2, for temperatures from +4 °C to +60 °C; resolution on request when ordering 0.1 – 0.2 or 0.5 mm. Output contact normally closed. Rain gauge with tipping bucket, area 400cm2, for temperature range -20°C (heated version)... +70°C.

View

S030 LAQUATwin Potassium Sensor

S030 LAQUATwin Potassium Sensor 2

SENSORS & PROBES

S030 LAQUATwin Potassium Sensor

S030 (3200459868)

Replacement Potassium (K) sensor for B‐731 and K‐11

AO-HE/T Hand Infeed Temperature Probe with PTFE-Hand Grip and Silicone-Cable (-50 +600°C)

SENSORS & PROBES

AO-HE/T Hand Infeed Temperature Probe with PTFE-Hand Grip and Silicone-Cable (-50 +600°C)

Hand Infeed Temperature Probe with PTFE-Hand Grip and Silicone-Cable (-50 +600°C)

VV1-A Precision Wind Speed (Out: 0÷2Vdc)

VV1-A Precision Wind Speed (Out: 0÷2Vdc) 2

SENSORS & PROBES

VV1-A Precision Wind Speed (Out: 0÷2Vdc)

VV1 Precision Wind Speed "

View

DO120 LAQUAact Handheld Meter for Water Quality

DO120 LAQUAact Handheld Meter for Water Quality 2

WATER QUALITY

DO120 LAQUAact Handheld Meter for Water Quality

DO120 (3200739849)

Handheld Meter only (includes electrode attachment, manual & 2 x AAA batteries)

View

ODOS-5005 Replacement Optical Sensor Cap

ODOS-5005 Replacement Optical Sensor Cap 2

SENSORS & PROBES

ODOS-1674 Measuring Cell with 1 "Internal Thread Connection

For mounting into a probe holder the sensor can be deliveredoptionally with a 1” process connector.

View

Perimeter Dendrometer DRL26D

Perimeter Dendrometer DRL26D 2

EMS Brno

Perimeter Dendrometer DRL26D

◆ The DRL26D data logging sensor is designed to measure perimeter stem growth on large stems 8 cm or larger in diameter (optionally 4 to 8 cm with a base plate). The sensor output is calibrated directly in millimeters of stem circumference growth.

View

SI-131 Ultra-Narrow Field of View Infrared Radiometer Sensor 14º APOGEE

SI-131 Ultra-Narrow Field of View Infrared Radiometer Sensor 14º APOGEE 2

SENSORS & PROBES

SI-131 Ultra-Narrow Field of View Infrared Radiometer Sensor 14º APOGEE

Apogee Instruments

AO-KWS Precision Anemometer

SENSORS & PROBES

AO-KWS Precision Anemometer

Precision Anemometer

SD-TEMP-P-06 Temperature sensor for pipes

SD-TEMP-P-06 Temperature sensor for pipes 2

SENSORS & PROBES

SD-TEMP Temperature sensor for pipes & walls

Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls

SONO-Ex GS1 Humidity Sensor for Heterogeneous Bulk Materials

SONO-Ex GS1 Humidity Sensor for Heterogeneous Bulk Materials 2

FOOD INDUSTRY

SONO-Ex GS1 Humidity Sensor for Heterogeneous Bulk Materials

The SONO-Ex GS1 measures moisture and conductivity in heterogeneous bulk materials like wood chips, pellets, and pasta, using high-frequency TDR technology to ensure precise and representative measurements.

View

SPTKI12 Combined Industrial Conductivity and Temperature 4-wire Pt100 probe

SENSORS & PROBES

SPTKI12 Combined Industrial Conductivity and Temperature 4-wire Pt100 probe

SENSECA (Delta Ohm)

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C. DISCONTINUED.

View

Y051L 150 ppm Calcium Ion Standard Solution of LAQUA Twin

Y051L 150 ppm Calcium Ion Standard Solution of LAQUA Twin 2

SENSORS & PROBES

Y051L 150 ppm Calcium Ion Standard Solution of LAQUA Twin

Y051L (3200457728)

Ca Calcium Standard solution 150ppm, 6 x 14 ml

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow