SPTKI12 Combined Industrial Conductivity and Temperature 4-wire Pt100 probe

Name: SPTKI12 Combined Industrial Conductivity and Temperature 4-wire Pt100 probe
Brand: SENSECA (Delta Ohm)
SKU: SPTKI12

Reference: SPTKI12 - Manufacturer: SENSECA (Delta Ohm)

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.

3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.

Data Sheet

The Sensor measures:: Conductivity/Temperature

16 other products in the same category:

SENSORS & PROBES

EXT/5W-01 Various Extension Cables, 5-way M12

Delta T

EXT/5W-01

€85.00

EXT/5W-XX: Extension Cables of various lengths: 1m, 5m, 10m and 25m, 5-pin M12.

HD2178.2 Thermometer with Data Logger and two inputs (Pt100 and Thermocouple)

SENSORS & PROBES

HD2178.2 Thermometer with Data Logger and two inputs (Pt100 and Thermocouple)

SENSECA (Delta Ohm)

HD2178.2

Thermometer with two inputs, the first for Pt100 sensor for input of probes equipped with SICRAM module, and the second input for thermocouple type K, J, T, E, N

View

RIGOL

Rigol Probe RP7150S

RIGOL

RP7150S

RIGOL probes for better testing and measurement

View

Skid Resistance-Floor Slip Tester - Skid-Tester

SENSORS & PROBES

Skid Resistance-Floor Slip Tester - Skid-Tester

Munro Instruments

Skid-Tester

This Portable Skid Resistance Tester is used extensively by safety, maintenance and facility managers.The Munro Stanley Portable Skid Resistance Tester complies in every detail with all relevant international standards. These include: - BS EN 13036-4:2011- BS 7976-1:2002+A1:2013- BS EN 1097-8:2009- BS 812-114:1989- ASTM E303- AS/NZS 4586-2013- AS/NZS...

View

ATP-01 Three phase DIN-RAIL 1Amp output Integrator

SENSORS & PROBES

ATP-01 Three phase DIN-RAIL 1Amp output Integrator

Meatrol

ATP-01

€170.00

ATP-01 is a Three phase DIN-RAIL 1A Output Rogowski coil integrator (Rogowski coils not included).The ATP-01 module comes in adistribution box, in a plastic module DIN-RAIL enclosure, powered directly from the mains. Advantages:• High reading accuracy 0.5%• Compact DIN-RAIL construction• High bandwidth for measurement from 30 to 5kHz• Output 1Amp rms

Pot-Tech Electronics

SC-XX Signal Converter (Current Output)

Pot-Tech Electronics PVT LTD

SC-XX

View

ODOS-5000 Sensor Óptico de Oxígeno Disuelto

ODOS-5000 Sensor Óptico de Oxígeno Disuelto 2

Oxígeno Disuelto DO

Sensor Óptico de Oxígeno Disuelto ODOS-5000

IKS-INDUSTRIAL

ODOS-5000

ODOS submersible version, applicable up to a water depth of 50m. First optical oxygen sensor with SCS interface! (Clark-Sensor Simulation) Seamless integration into running systems. The ideal replacement for your existing oxygen sensors. Model rangeThe sensor can be delivered with an IP68 termination plug or with a fixed cable in different lengths. For...

View

SENSORS & PROBES

SP-230-SS Sunshine Sensor (heated)

Apogee Instruments

SP-230-SS

€430.00

BUYING IN BULK, OR JUST WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our More info about this product form

SENSORS & PROBES

SMR56 Nitric Oxide Gas Analyzer

Aquas Inc.

SMR56

The Nitrogen Oxide Gas Analyzer connects directly through the RS485 communication interface, providing simple, reliable and economical process data with remote monitoring, calibration, configuration and diagnostics capabilities.

View

SENSORS FOR WEATHER STATIONS

MCS Signal Conditioning Module for Nesa sensors

Nesa srl

MCS

€360.00

DIN rail module for signals conversion at high-resolution (18-bit): accepts Pt100, thermopiles, voltages (micro voltage 0÷100mV) and currents or digital signals (frequency or counts) as input, and generates an output signal normalized as: 0÷2Vdc, 0÷20mA, 4÷20mA, RS485, Modbus RS485 serial.Includes a programming interface and a software that allows the...

AIR QUALITY

AIS-3 Microbial Air Sampler - with PC software & Airflow Compensation

MRC

AIS-3

€5,100.00

Widely used in pharmaceutical company, milk product plant, clinical operation room, fermentation industry et al, where microbial contamination needs to be strictly monitored and controlled. Also it is applicable in institutes that need study of the air microbial condition.

CDI-25 LOCAL FLOW MONITOR FOR COMPRESSED AIR

SENSORS & PROBES

CDI-25 LOCAL FLOW MONITOR FOR COMPRESSED AIR

CDI Meters

CDI-25

LOCAL FLOW MONITOR FOR COMPRESSED AIR Low cost permits monitoring of loads throughout an industrial plant Alarm functions indicate when leakage has developed or usage has become excessive Totalizing function allocates usage and cost Complete flowmeter in one package

View

Leaf-Clips Detachable Leaf-Clips (10-piece set)

SENSORS & PROBES

Leaf-Clips Detachable Leaf-Clips (10-piece set)

PSI

Leaf-Clips

€220.00

Detachable Leaf-ClipsSupplementary detachable leaf-clips for use with the FluorPenFP 110/D and the PAR-FluorPenFP 110/D.10-piece set.

SENSORS FOR WEATHER STATIONS

AO-510-01 Soil Moisture Sensor

AO-Electronics

AO-510-01

Soil moisture sensor can be widely applied to the soil moisture monitoring, water-saving irrigation, greenhouse control, fine agriculture, hydrology and meteorology, and other fields, road monitoring.

View

ExTempMini, Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures

SENSORS & PROBES

ExTempMini, Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures

CALEX ELECTRONICS UK

ExTempMini

€1,159.00

► ExTempMini infrared temperature sensor with miniature sensing head and separate electronics module.► For use with a suitable isolator in the safe area.► Fully configurable via optional USB adapter (available separately).► Supplied with 2 x mounting nuts and operator’s guide.► Intrinsically Safe Infrared Temperature Sensor for High Ambient Temperatures,...

Apogee SQ-100X-SS: Original Quantum PAR Light Sensor

Apogee Instruments

Apogee SQ-100X-SS: Original Quantum PAR Light Sensor

Apogee Instruments

SQ-100X-SS

€299.00

◆ The Apogee SQ-100X-SS PAR Light sensor is a self-powered, analog original quantum sensor with a 0 to 250 mV output.◆ The sensor features a rugged, self-cleaning sensor housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers.