HD 50R-MB Data Logger with Master RS485 Modbus-RTU Interface
HD 50R-MB Data Logger with Master RS485 Modbus-RTU Interface
HD 50R-MB Data Logger with Master RS485 Modbus-RTU Interface
HD 50R-MB Data Logger with Master RS485 Modbus-RTU Interface

HD50R-MB Data Logger with Master RS485 Modbus-RTU Interface (35 mm DIN RAIL)

Reference: HD50R-MB - Manufacturer: SENSECA (Delta Ohm)

Data logger with Master RS485 Modbus-RTU interface for acquiring sensors with RS485 Modbus-RTU output (for example an anemometer of the HD52.3D ... series). A proprietary protocol is also available for connecting anemometers of the HD2003 series. A voltage-free contact input allows connecting to tipping bucket rain gauge.
It communicates with the PC / PLC via USB or Ethernet local network (proprietary TCP / IP or Modbus TCP / IP protocol).
Number of samples: Min = 259,000, Max = 890,500 (depending on the number of acquired quantities).

Includes Cable CP23 (Cable USB)

 

If the data logger is connected via Ethernet and the local network has an Internet connection, the acquired data is transmitted via e-mail, via FTP and to an HTTP server (Cloud).
Acoustic alarm with internal buzzer and sending of alarm e-mails. External 7 ... 30 Vdc power supply. 35 mm DIN rail installation.
Instrument operating temperature / humidity: -10 ... + 60 ° C / 0 ... 85% RH.

-It includes HD35AP-S downloadable software from Delta OHM web site.
-The external probes have to be ordered separately.
-The CP23 USB cable is included.
-Ethernet cable is not included.

Data logger with Master RS485 Modbus‑RTU interface for acquiring sensors with RS485 Modbus‑RTU output (for example an anemometer of the HD52.3D... series). A proprietary protocol is also available for connecting anemometers of the HD2003 series. A voltage-free contact input allows connecting a tipping bucket rain gauge.

It communicates with the PC/PLC via USB or Ethernet local network (proprietary TCP/IP or Modbus TCP/IP protocol).

Number of samples: Min = 259,000, Max = 890,500 (depending on the number of acquired quantities).

If the data logger is connecetd via Ethernet and the local network has an Internet connection, the acquired data are transmitted via e-mail, via FTP and to an HTTP server (Cloud).

Acoustic alarm with internal buzzer and sending of alarm e-mails.

External 7…30 Vdc power supply.

35 mm DIN rail installation.

Instrument operating temperature / humidity: ‑10…+60 °C / 0…85 % RH.

It includes HDServer1 and HD35AP-S softwares downloadable from Delta OHM website.

-----------------DATA LOGGERS----------------
Data Acquisition
Environment of Use
Indoor
IP Classification
IP54
Communications
RS485 Modbus RTU

16 other products in the same category:

Tempmate.®-i1 Single-use TEMPERATURE INDICATOR EN12830 compliant Tempmate.®-i1 Single-use TEMPERATURE INDICATOR EN12830 compliant 2
INSIDE & OUTSIDE USE

Tempmate.®-i1 Single-use temperature indicator compliant with EN12830 (40 unit pack)

Tempmate
Tempmate-i1
€6.00
tempmate.®-i1 temperature indicators have been specially developed for monitoring pharmaceutical products’ cold chain. As a pre-programmed device, the tempmate.®-i1 can be immediately deployed for monitoring temperature-sensitive goods and freight. In contrast to chemical indicators, this electronic indicator’s 3 LEDs provide simple and clear feedback on...
Product added to wishlist
Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow