TRAINING & EDUCATION SYSTEMS Scientech2801 TechBook for PAM, PPM, PWM Techniques and Line Coding Techniques SCIENTECH TECHNOLOGIES Scientech2801 Scientech2801 TechBook for PAM, PPM, PWM Techniques and Line Coding Techniques provides an extensive hands on learning on PAM, PPM, PWM and Line Coding Techniques. View
TRAINING & EDUCATION SYSTEMS Scientech2802 TechBook PCM, DPCM, CVSD Modulator and Demodulator SCIENTECH TECHNOLOGIES Scientech2802 Scientech2802 TechBook PCM, DPCM, CVSD Modulator and Demodulator provides an extensive hands on learning on PCM, DPCM, CVSD Modulator & Demodulator. View
TRAINING & EDUCATION SYSTEMS Scientech2803 TechBook Delta, Adaptive Delta, Sigma Delta Modulator and Demodulator SCIENTECH TECHNOLOGIES Scientech2803 Scientech2803 TechBook Delta, Adaptive Delta, Sigma Delta Modulator and Demodulator provides an extensive hands on learning on Delta, Adaptive Delta, Sigma Delta Modulator & Demodulator. View
TRAINING & EDUCATION SYSTEMS Scientech2804 TechBook 4 Channel TDM PCM Transmitter and Receiver SCIENTECH TECHNOLOGIES Scientech2804 Scientech TechBook 2804 provides an extensive hands-on learning on 4 Channel and 2 Channel TDM PCM Transmitter and Receiver. View
TRAINING & EDUCATION SYSTEMS KL-800 Autotronics/Automotion Training System KandH KL-800 Interactive Computerized Automotive System The whole system has been modularized to provide electronic and automotive courses with step-by-step experiments on educational technology training.All theoretical, experimental and practical learning procedures are supported by personal computer assisted supervision and dedicated software.The KL-800 can simulate... View
TRAINING & EDUCATION SYSTEMS AT-11003 Navigation & Communication Trainer KandH AT-11003 The Navigation and Communication Trainer is a basic functional simulation of a standard aircraft avionics system. Besides that, most components in the trainer will be fully functional aircraft components. It is intended for use in avionics / aircraft electronics curriculum and is aimed at providing students with hands-on experience in aircraft avionics. View
TRAINING & EDUCATION SYSTEMS AT-12001 Cockpit Instrumentation Trainer KandH AT-12001 The trainer provides hands-on training for the students to get a good understanding of the operating principles of probes, sensors, pressure and electronic display system. View
TRAINING & EDUCATION SYSTEMS AT-F1003 Diamond DA40 Flight Simulator System with Mock-up Fuselage KandH AT-F1003 The complete flight simulator system provides the functional simulation of single piston engine propeller aircraft with all details. It is reproduced according to the exact dimensions and layout of the original instrument panel which can be found in the Diamond DA40 aircraft. View
TRAINING & EDUCATION SYSTEMS AT-F3001A Basic Model Flight Simulator KandH AT-F3001A The Basic Model Flight Simulator consists of six essential flight instruments which are all precise replica of a general aviation instruments. In addition, simulates a full VFR single engine aircraft. View
TRAINING & EDUCATION SYSTEMS AT-S01 Boeing B737-800 Maintenance Simulation Trainer KandH AT-S01 The 26 simulation modules provide a step-by-step approach for users to learn from Aircraft Walkaround to the internal cockpit control in every aspect of B737-800. Moreover, the simulation content focuses on the introduction to the position of every control panel and component parts in terms of the operation method and control theory. It is an ideal... View
TRAINING & EDUCATION SYSTEMS AT-300 Basic Skill Trainer KandH AT-300 AT-300 is in an H-shaped frame using aluminum alloy, powder coat steel plate, and aluminum sheet metal. It is suitable for aviation training center teaching EASA Part 66 Modules 6, 7, and 11. View
TRAINING & EDUCATION SYSTEMS AT-F1005 Airbus 320 Flight Simulator and Visual System KandH AT-F1005 The A320 Flight Simulator, which is valuable in teaching pilots for conducting simulation, is realistic replica of Airbus 320 cockpit. The system aims to provide students with concepts in various avionics & aircraft instrumentation. View
TRAINING & EDUCATION SYSTEMS AT-13101 Mini Turbine Engine Trainer KandH AT-13101 AT-13101 Mini Turbine Engine Trainer, with more than 12KG of thrust, was developed and manufactured in Taiwan. This Turbine Engine trainer is controlled by Electronic Control Unit (ECU). View
TRAINING & EDUCATION SYSTEMS AT-11007 Avionics Trainer KandH AT-11007 The Avionics Trainer is available for performing complete functional simulation of a standard aircraft avionics system. Besides that, can be used for providing hands-on training for the students to attain a good understanding of the operating principles of various instruments. View
TRAINING & EDUCATION SYSTEMS KL-900D Fiber Optic Transmission Training System KandH KL-900D Fiber Optic communication is one of the most popular technologies in the modern days due to its high transfer speed and large capacity. KL-900D uses fiber optic as a transmission media for the whole experiment. View
TRAINING & EDUCATION SYSTEMS KL-900E Near Field Communication (NFC) Trainer KandH KL-900E NFC (Near Field Communication) is a type of short-range wireless technologies, with typical distance of 10 cm or less. NFC is compatible with existing passive RFID (13.56 MHz ISO/IEC 18000-3) infrastructures. View
TRAINING & EDUCATION SYSTEMS KL-500 Industrial Electronic Trainer KandH KL-500 The KL-500 Industrial Electronic Trainer is a self-contained training equipment allowing students to learn more than 70 experiments through a power supply unit and 16 replaceable modules. View
TRAINING & EDUCATION SYSTEMS KL-600 Advanced Sensor Experimental System KandH KL-600 The KL-600 Advanced Sensor Training System is a comprehensive sensor / transducer control training system that incorporates industrial-grade components with various control circuits and load units. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications. View
TRAINING & EDUCATION SYSTEMS KL-620 Basic Sensor Experimental Lab KandH KL-620 The KL-620 Basic Sensor Experimental Lab is a comprehensive sensor / transducer control training system. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications. View
TRAINING & EDUCATION SYSTEMS KL-630 MEMS Training System KandH KL-630 MEMS (Micro-electromechanical Systems) based sensors such as accelerometer, gyroscope and magnetometer, are crucial components used in smart portable devices, such as smart phone and tablet PC. The demand of MEMS sensors has been increased dramatically and identified as one of the most promising technologies nowadays. CE approved View
TRAINING & EDUCATION SYSTEMS ACS-1000 Analog Control System KandH ACS-1000 ACS-1000, covered with many technical disciplines, explicates the central significance of Analog Control System. This applies particularly in mechanical and electrical engineering, and as well in production and process technology. It is indispensable to plant and system technology. View
TRAINING & EDUCATION SYSTEMS ITS-200series IPv6 Training System KandH ITS-200series Explosive growth in network device diversity and mobile communications, along with global adoption of networking technologies, have overwhelmed IPv4 and have driven the development of a next-generation Internet Protocol (IPv6). View
TRAINING & EDUCATION SYSTEMS MTS-33T Intelligent Micromouse Trainer KandH MTS-33T MTS-33T allows students to carry out 3 types of micromouse experiments on a lab table individually including wall maze solver, line maze solver, and line follower. With provided maze wall, post, and line track pad, students can setup corresponding experiment environments efficiently and flexibly. View
TRAINING & EDUCATION SYSTEMS MTS-51 8051 Microcomputer Trainer KandH MTS-51 8051 is the original chip of MTS-51 family devices which is originated from Intel. This chip is a stand-alone, powerful 8-bit single-chip microcomputer and is commonly used for real-time control applications. MTS-51 microcomputer trainer is designed for learning 8051 core architecture and instructions. View
TRAINING & EDUCATION SYSTEMS MTS-54 MSP430 Training Lab KandH MTS-54 MSP430 training lab is a training platform designed for learning MSP430 microcontroller from Texas Instruments (TI). The microcontroller used is MSP430F5438A, which is featured with ultralow-power and consists of several peripheral modules targeted for various analog and digital applications. View