Fuel Cells

AEB-2.0 Anode Electrolyte Button Bi-Layer

AEB-2.0 Anode Electrolyte Button Bi-Layer 2

Fuel Cells

AEB-2.0 Anode Electrolyte Button Bi-Layer

Fuel Cell Materials

Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low-temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation.Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)

View

AEB-5 Anode Electrolyte Planar Bi-Layer (Minimum Qty: 5)

AEB-5 Anode Electrolyte Planar Bi-Layer (Minimum Qty: 5) 2

Fuel Cells

AEB-5 Anode Electrolyte Planar Bi-Layer

Fuel Cell Materials

Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation. Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)

View

250SCH 250 cm2 CELL HARDWARE (no MEA provided)

250SCH 250 cm2 CELL HARDWARE (no MEA provided) 2

FUEL CELL TECHNOLOGIES

250SCH 250 cm2 CELL HARDWARE (no MEA provided)

FUEL CELL TECHNOLOGIES INC.

View

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm) 2

Fuel Cells & Individual Cells for SOFC

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. (Minimum quantity: 5 units)

View

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm) 2

Fuel Cells & Individual Cells for SOFC

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. Note: The 20mm diameter are for each part of the round button cell, and each cell has an...

View

Flat Cell Compatible with NextCell Electrolite (10x10 cm)

Flat Cell Compatible with NextCell Electrolite (10x10 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(10x10 cm) Flat Cell Compatible with Electrolite (10x10 cm)

NextCell(10x10 cm)

View

Flat Cell Compatible with NextCell Electrolite (4x7 cm)

Flat Cell Compatible with NextCell Electrolite (4x7 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(4x7 cm) Flat Cell Compatible with Electrolite

NextCell(4x7 cm)

View

Flat Cell Compatible with NextCell Electrolite (5x5 cm)

Flat Cell Compatible with NextCell Electrolite (5x5 cm) 2

Fuel Cells & Individual Cells for SOFC

NextCell(5x5 cm) Flat Cell Compatible with Electrolite

NextCell(5x5 cm)

View

NextCell Button Cell Compatible with Electrolyte

NextCell Button Cell Compatible with Electrolyte 2

Fuel Cells & Individual Cells for SOFC

NextCell-2.0 Button Cell Compatible with Electrolyte (20 mm)

With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.

View

NextCell Button Cell Compatible with Electrolyte

NextCell Button Cell Compatible with Electrolyte 2

Fuel Cells & Individual Cells for SOFC

NextCell-2.5 Button Cell Compatible with Electrolyte

With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.

View

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm)

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm) 2

Fuel Cells

SECA-2.0 Single Electrode Button Cell – Anode Only (20mm & 25mm)

Fuel Cell Materials

Single electrode button cells use Nexceris’ patent pending high strength, highly conductive HionicTM electrolyte support combined with the NextCellTManode system on one side.This gives researchers a perfect tool for testing anode systems on a very consistent platform. Single electrode button cells come in two standard support sizes, each with a 12.5 mm...

View

Ceramic oxide powders

NORECS

Ceramic-Oxide-Powders - Ceramic oxide powders

Ceramic-Oxide-Powders

Ceramic oxide powders: Standard quantities between 100 g and 10 kg are available. Other quantities are upon request.

View

850 Fuel Cell Test System

850 Fuel Cell Test System 2

SCRIBNER ASSOCIATES

Scribner 850-PEM/DMFC Fuel Cell Test System

Scribner Associates

The model 850 Multi-Range Fuel Cell Test System is a complete test station for operation and measurement of PEM/DMFC fuel cells. The 850 is ideal for single-cell and short-stack fuel cell research and university programs.

View

Scribner 855 SOFC Fuel Cell Test System

Scribner 855 SOFC Fuel Cell Test System 2

SCRIBNER ASSOCIATES

Scribner 855 SOFC Fuel Cell Test System

Scribner Associates

◆ The 855 SOFC Test system is an integrated, turn-key Solid Oxide Fuel Cell (SOFC) Test System.

View

Platinum on Carbon Catalyst XC-72

AO-Electronics

Platinum on Carbon XC-72 Fuel Cell Catalyst

Fuel Cell Catalyst

View

Showing 1-15 of 15 item(s)

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow