Horiba LAQUAtwin-iCa Calcium Ionometer

◆ Measures calcium reliably and very easy to use.
◆ It takes only a few minutes to provide the result, making it an ideal instrument to know the health status of the cow.

Features
► Temperature compensation.
► Automatic calibration: recognizes the calibration solutions. The user can choose one or two point calibrations.
► Detection of the stability of the result.
► Waterproof (IP67).
► They do not use reagents.
► Automatic selection of the appropriate range.
► Automatic power off (30 minutes).

Measurements in 3 easy steps:

1. Calibration:
For a correct calibration it is necessary that the sensor is previously cleaned. If this is not the case, rinse it with cleaning solution and put some standard solution on the sensor and press the calibration button. A smiley face will appear as an indication that calibration is complete. Wipe the sensor with cleaning solution until the calibration solution is removed and dry with a clean, soft tissue.

2. Analysis:
It only requires a tiny amount of sample, so all you have to do is fill the sensor and wait a few seconds for the smiley face to appear.

3. Cleaning:
Always keep the sensor clean.

Notes:
- The sensors should be replaced after approx. 1000 measurements or when calibration cannot be performed.
- Sensors are sold separately and can be easily removed and replaced.

► Range: 0.1 to 5.0 mmol/L.
► Resolution: 0.1mmol/L.
► Accuracy: ± 20% of the reading value.
► Calibration: 2 points.
► Standard solution 1.25 mmol/L
► Standard solution 2.50 mmol/L

Version 1:
► With 2 CR2032 batteries, 1 wash bottle, Instruction Manual and Quick Guide.
► Carrying case.
► 1 Calibration solution at 1.25 mmol/L (25 ml).
► 1 Calibration solution at 2.50 mmol/L (25 ml).
► 1 Cleaning solution (250 ml).

Version 2:
► With 2 CR2032 batteries, 1 wash bottle, Instruction Manual and Quick Guide.
► Carrying case.
► 2 Calibration solutions at 1.25 mmol/L (25 ml).
► 2 Calibration solutions at 2.50 mmol/L (25 ml).
► 3 cleaning solutions (250 ml).