9480-10C LAQUA Combined pH Electrode Long ToupH Glass Body (Large Containers and Long Test Tubes)

Horiba

9480-10C LAQUA Combined pH Electrode Long ToupH Glass Body (Large Containers and Long Test Tubes)

Horiba

9480-10C LAQUA Combined pH Electrode Long ToupH Glass Body (Large Containers and Long Test Tubes)

Reference: 9480-10C (3200611628) - Manufacturer: HORIBA

This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.
- Electrode: 283mm length, 8mm diameter
- Constructed with responsive glass that is 10x stronger than JIS standards
- Waterproof, Pb-free glass

pH Range	0 to 14
Temperature Range	0 to 100°C
Liquid Junction	Ceramic
Cable	1m
Connector	BNC
Overall Length	283mm
Diameter	8mm
Filling Solution	525-3 or 300 (3.33M KCl)

The Sensor measures:: Nitrate

English Brochure

Download (3.07MB)

Viewed products

AO-HET/E Hand Infeed Temperature Probe with PTFE-Hand Grip and PTFE-cable (-50 +250°C)

SENSORS & PROBES

AO-HET/E Hand Infeed Temperature Probe with PTFE-Hand Grip and PTFE-cable (-50 +250°C)

Hand Infeed Temperature PT100, PT500 or PT1000 Probe -50...+250°C Pt100 (DIN EN 60751 Cl. B), Pt500 (DIN EN 60751 Cl. B), Pt1000 (DIN EN 60751 Cl. B) water-vapour-proof casted stainless steel bend protection Hand grip PTFE Cable 4 m PFA (2x0,22 mm²)

STR-32G Sun Tracker

STR-32G Sun Tracker 2

STR-32G Automatic Sun Tracker

Eko Instruments

Accurate set up by automatic retrieval of position and time at any place on earth Easy installation and operating without need of a computer Operating status indication by LED signal Continuous clock synchronization enabling permanent reliable and accurate positioning of the solar radiometers measuring direct, diffuse and global irradiance RS-232 serial...

View

16 other products in the same category:

2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double Stack Cell)

2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double Stack Cell) 2

Electrodes

2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double...

2565A-10T (3014080436)

Suitable for measurements of liquid other than normal aqueous solutions, such as suspensions, emulsions, paste, and non-aqueous solutions. When the potassium chloride solution of the internal solution reacts with the sample, measurements can be stably carried out by filling the sample or any other chloride solution in the external jacket. The replacement...

View

6252-10D LAQUA pH 3-1 Electrode With Needle Tip Temp Sensor and Glass Body (for Food Samples)

6252-10D LAQUA pH 3-1 Electrode With Needle Tip Temp Sensor and Glass Body (for Food Samples) 2

Electrodes

6252-10D LAQUA pH 3-1 Electrode With Needle Tip Temp Sensor and Glass Body (for Food...

6252-10D (3014080850)

The needle tip of this glass-body, refillable pH electrode with temperature sensor allows measurement of food samples and aqueous solutions.

View

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples)

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples) 2

Electrodes

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and...

9481-10C (3200611631)

This glass-body, refillable pH electrode gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints). Previous model: 9681-10D, 9677-10D.- The liquid junction is designed with a movable sleeve that prevents clogging. - Easy to clean and provides quick stable readings- Waterproof, Pb-free glass

View

3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water) Conductivity Cell

3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water) Conductivity Cell 2

Electrodes

3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water)...

3553-10D (3014081714)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell 2

Electrodes

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) /...

3574-10C (3014082592)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

3200611627 Combined pH Electrode Micro ToupH Glass Body 9418-10C (for Low Volume Samples) LAQUA

3200611627 Combined pH Electrode Micro ToupH Glass Body 9418-10C (for Low Volume Samples) LAQUA 2

Electrodes

9418-10C LAQUA Combined pH Electrode Micro ToupH with Glass Body (for Low Volume Samples)

9418-10C (3200611627)

This glass-body, refillable pH electrode can measure samples as low as 50µL.- Compatible with extremely small sample containers (e.g., microtubes)- Temperature sensor is placed beside the bulb for quick response- Waterproof

View

3552-10D LAQUA Conductivity Electrode (Submersible / General Use Type) Conductivity Cell

3552-10D LAQUA Conductivity Electrode (Submersible / General Use Type) Conductivity Cell 2

Electrodes

3552-10D LAQUA Conductivity Electrode (Submersible / General Use Type) Conductivity Cell

3552-10D (3014081545)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

9551-20D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 5401 and Temperature Sensor

9551-20D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 5401 and Temperature Sensor 2

Electrodes

9551-20D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 5401 and Temperature...

9551-20D (3014047090)

DO Electrodes (with 2 m cable unless otherwise stated, BNC and phono jack - not applicable for replacement tips)

View

7682S LAQUA Potassium Ion Electrode Tip

7682S LAQUA Potassium Ion Electrode Tip 2

Electrodes

7682S LAQUA Potassium Ion Electrode Tip

7682S (3200697413)

View

6367-10D LAQUA pH 3 in 1 Electrode Standard with Sleeve Glass Body (for High Accuracy pH Measurement)

6367-10D LAQUA pH 3 in 1 Electrode Standard with Sleeve Glass Body (for High Accuracy pH Measurement) 2

Electrodes

6367-10D LAQUA pH 3 in 1 Electrode Standard with Sleeve Glass Body (for High Accuracy...

6367-10D (3014079136)

This glass-body, refillable pH electrode 6367-10D with temperature sensor has a sleeve junction for improved stability and repeatability. Ideal for highly accurate pH measurement

View

0040-10D LAQUA pH Electrode ISFET

0040-10D LAQUA pH Electrode ISFET 2

Electrodes

0040-10D LAQUA pH Electrode tip ISFET

0040-10D (3200367926)

DISCONTINUED ISFET Replacement Tip for 0040-10D ISFET pH electrode

View

9300-10D LAQUA ORP Electrode

9300-10D LAQUA ORP Electrode 2

Electrodes

9300-10D LAQUA ORP Electrode

9300-10D (3014046710)

- The flat platinum sensor at the tip allows measurement of low-volume samples- Waterproof- Combination electrode

View

9680S-10D LAQUA pH Electrode 3-1 Long ToupH Glass Body (Large Containers and Long Tubes)

9680S-10D LAQUA pH Electrode 3-1 Long ToupH Glass Body (Large Containers and Long Tubes) 2

Electrodes

9680S-10D LAQUA pH Electrode 3-1 Long ToupH Glass Body (Large Containers and Long Tubes)

9680S-10D (3200585455)

This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.- Electrode: 283mm length, 8mm diameter- Constructed with responsive glass that is 10x stronger than JIS standards- Waterproof, Pb-free glass

View

9681S-10D LAQUA Electrode pH 3 in 1 ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples)

9681S-10D LAQUA Electrode pH 3 in 1 ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples) 2

Electrodes

9681S-10D LAQUA Electrode pH 3 in 1 ToupH Sleeve with Glass Body (for Viscous and...

9681S-10D (3200585463)

This glass-body, refillable pH electrode with integrated temperature sensor gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints).- The liquid junction is designed with a movable sleeve that prevents clogging. - Easy to clean and provides quick stable readings- Waterproof, Pb-free glass

3200705774 Ammonia Electrode Membrane Caps for LAQUA

3200705774 Ammonia Electrode Membrane Caps for LAQUA 2

SENSORS & PROBES

3200705774 Ammonia Electrode Membrane Caps for LAQUA

Standard Graphite Counter Electrode Kit, AFCTR3B

SENSORS & PROBES

Standard Graphite Counter Electrode Kit AFCTR3B

It includes a 150 mm long isolation tube and adapter to fit 14/20 port 6.4 mm OD graphite rod, 184.2 mm long.

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow