View larger

R0110E Economic Thermometer (-30 ºC a + 70 ºC.)

Reference R0110E

Condition: New

Thermometer

Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter. Thermometer is designed for record of temperature.

More info about this product.

Share on Facebook!
Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

Overview
Specifications
Optional Accesories

The device includes Traceable calibration certificate with declared metrological traceability of etalons is based

Main thermometer applications:

Transport of food or pharmaceuticals
Food and beverage industry (HACCP)
Pharmaceutical industry
Blood stations, pharmacies
Horticulture and cultivation of plants
HVAC (heating, ventilation, air conditioning, cooling)
Building and energy management
Research and development
Laboratories (GLP)
Warehouses
Technological processes
Museums, archives, galleries

Thermometer advantages:

Included traceable calibration certificate from the manufacturer
Fast data transfer to the PC (full memory for approximately 30s)
Variability of connection to the computer - USB, RS232, Ethernet, GSM modem
Permanent connection to the PC enabled, data is possible to download even during logging
Large data memory 32000 values
Optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
Dual level alarm is enabled for each channel, alarm is indicated by blinking of the LED diode
Two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
Robust watertight case
Low power consumption from battery, battery life up to 7 years
Indication of remaining battery life, easy replacement of the battery
It is possible to combine temperature measurement with logging of contact state (e.g. door contact)
Logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
Also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
Each logger is possible to describe with text of maximum 32 characters
Each channel is possible to describe with text of maximum 16 characters
Password protection is enabled to prevent unauthorized manipulation with logger

Technical parameters	Value
Measured Value	Temperature
Construction Type	Ambient Air
Temperature Measuring Range	-30 to +70°C
Two-State Input	No
Lcd Display	No
Built-In Printer	No
Operating temperature range	-30 to +80°C
Accuracy of temperature measurement	±0.6°C from -30 to +30°C ±0.8°C from +30 to +70°C
Resolution of the reading	0.1°C
Real time clock	year, leap year, month, day, hour, minute, second
Data logging interval	adjustable from 10s to 24h
Alarm refresh	each 10 s
Total memory capacity	32000 temperature values in noncyclic logging mode
Data logging mode	noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
Power	Lithium battery 3,6V, size AA
Typical battery life	7 years
Battery life in continuous on-line mode with interval 1 minute	reduced to 70% of the above life
Battery life in continuous on-line mode with interval 10 second	1 year
IP protection	IP67 - protected against influence of temporary immersion into water
Dimensions	93x64x27mm
Weight including battery	approximately 100g
Warranty	2 years

GSM communication

KIT - GSM/GPRS modem LP040 with accessories for Sxxxx, Rxxxx loggers code: KIT-GSM-L	COM adapter with protection IP65 code: LP012	GSM/GPRS MODEM for data loggers of Sxxxx, Rxxxx, Gxxxx families code: LP040
antenna for GSM modem FASTRACK code: MP009/1	AC/DC adapter 230Vac to 24Vdc/1A, switch-mode code: A1940	Communication cable for GSM modem code: QMS2901
Transducer USB/RS232 complete code: MP006	Self Adhesive Dual Lock code: MD036	Wall holder for GPRS modem code: MP036
DIN Rail 35mm holder for GPRS modem code: MP037	One time fee for using M2M server - applied for each data logger with modem code: SLU302

Start/stop magnet code: LP004	USB adapter code: LP003	USB adapter cable USB A/female - Micro USB/male - OTG code: OTG
COM adapter with protection IP65 code: LP012	LAN adapter with 0.5 meter cable code: LP005	LAN adapter with 5 meter cable code: LP005-5
Lithium battery 3,6V/AA code: A4203	wall holder for datalogger code: F9000	Self Adhesive Dual Lock code: MD036