The T-DCI-F900-L-O Airflow Sensor from AccusSense is designed to measure the velocity of airflows in applications such as HVAC, industrial processes, automotive, air filtration systems, electronics enclosures and critical containment areas.
Requires analog port selection during U30 configuration and use of a S-FS-CVIA when using the H22-001. When using a U12 or UX120 Data loggers, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).
Environment: The T-DCI-F900-L-O Sensor is for use in Indoor environments
Measurements: The T-DCI-F900-L-O Sensor supports the following measurements: Air Velocity
Measurement range 'O' model: 0.15 - 5 m/s (30 - 985 fpm)
Accuracy: Greater of 10% of reading or +/-0.05 m/s or 1% full-scale
Standard medium: Air at standard pressure (101.3 kPa, 29.95' Hg)
Operating compensated temperature range: 15 – 35 C (59 – 95 F)
Storage temperature: -10 to 100C
Supply voltage: 7-13 VDC
Supply current: 40 - 75 mA (10K ohm nominal)
Warm-up time: < 5 sec
Response time: 1.5 sec
Output: Linear 0 - 4 VDC full scale for calibrated range, up to 4.9 VDC beyond calibrated range
Sensor head material: Plastic
Dimensions: 100 mm x 12 mm diameter for 'S' model, 91 mm x 12 mm for 'L' model
Weight: 'S' model 1 oz., 'L' model 1.8 oz.
Vibration: Up to 25 G
Acceptable angle: +/- 300 from perpendicular
Repeatability: +/- 1% under same conditions
View F-900 series sensors AccuSense Air Velocity & Temperature Sensor
You might also like
