S3120E Economy Thermometer (-30 to +70°C) (0 to 100%)

S3120E

Comet System

New

Thermo-hygrometer

Economic data logger is designed for recording the temperature and humidity. The values are stored in a non-volatile electronic memory. The transfer of data to the personal computer for further analysis is done through USB, RS232, GSM or Ethernet through a suitable communication adapter (optional).

Volume discounts

Quantity Price
(tax excl.)
You Save
%
1+ 135,00 € 0%
5+ 132,30 € 2%
10+ 129,66 € 3.9545%
15+ 127,08 € 5.8636%

135,00 €

tax excl.

Add to wishlist

Main economic thermometer applications:

  • Transport of food or pharmaceuticals
  • Food and beverage industry (HACCP)
  • Pharmaceutical industry
  • Blood stations, pharmacies
  • Horticulture and cultivation of plants
  • HVAC (heating, ventilation, air conditioning, cooling)
  • Building and energy management
  • Research and development
  • Laboratories (GLP)
  • Warehouses
  • Technological processes
  • Museums, archives, galleries
  • TÜV SÜD certified to conform to EN 12830,
    Class 1 and EN 13486, Class 1 for the transport of food

Thermometer advantages:

  • included traceable calibration certificate from the manufacturer - Comet
  • fast data transfer to the PC (full memory for approximately 30s)
  • variability of connection to the computer - USB, RS232, Ethernet, GSM modem
  • permanent connection to the PC enabled, data is possible to download even during logging
  • large data memory 32000 values
  • optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
  • dual level alarm is enabled for each channel, alarm is indicated by blinking of the LED diode
  • two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
  • robust watertight case
  • easy installation, locking enabled
  • low power consumption from battery, battery life up to 7 years
  • indication of remaining battery life, easy replacement of the battery
  • standard temperature sensor is Pt1000/3850ppm, switchable to Ni1000/6180ppm external probes at range -50 to +150°C
  • it is possible to combine temperature measurement with logging of contact state (e.g. door contact)
  • logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
  • also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
  • each logger is possible to describe with text of maximum 32 characters
  • each channel is possible to describe with text of maximum 16 characters
  • password protection is enabled to prevent unauthorized manipulation with logger

Included in delivery:

  • Data logger including the battery
  • Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
  • Quick start manual
  • Free basic Windows software is ready to download at folder

 

 

 

  

 

Technical parameters

Value

Measured Value

Relative Humidity + Temperature

Construction Type

Ambient Air

Temperature Measuring Range

-30 to +70°C

Two-State Input

No

Lcd Display

Yes

Built-In Printer

No

Operating temperature range

-30 to +70°C

Accuracy of temperature measurement

±0.6°C from -30 to +30°C
±0.8°C from +30 to +70°C

Accuracy of air humidity measurement

±3% RH from 5 to 95% at 23°C

Accuracy of dew point measurement - see details in graph

2 °C at ambient temperature lower than 25°C and RH > 30%; range -60 to +70 °C

Resolution of the reading

0.1°C, 0.1%RH

Real time clock

year, leap year, month, day, hour, minute, second

Data logging interval

adjustable from 10s to 24h (1minute to 24h in low-power mode)

Display and alarm refresh

each 10 s (each 1 minute in low-power mode)

Total memory capacity

32000 temperature, humidity values in noncyclic logging mode

Data logging modes

noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new

Power

Lithium battery 3,6V, size AA

Typical battery life in low-power mode (1 minute sampling)

6 years

Typical battery life in fast mode (10 second sampling)

2.5 years

Battery life in continuous on-line mode with interval 1 minute

reduced to 70% of the above lives in fast mode

Battery life in continuous on-line mode with interval 10 second

1 year

IP protection

IP30

Dimensions

93x64x29mm

Weight including battery

approximately 115g

Warranty

2 years

GSM communication

 
 
 
KIT - GSM/GPRS modem LP040 with accessories for Sxxxx, Rxxxx loggers
code: KIT-GSM-L
KIT - GSM/GPRS modem LP040 with accessories for Sxxxx, Rxxxx loggers
COM adapter with protection IP65
code: LP012
COM adapter with protection IP65
GSM/GPRS MODEM for data loggers of Sxxxx, Rxxxx, Gxxxx families
code: LP040
GSM/GPRS MODEM for data loggers of Sxxxx, Rxxxx, Gxxxx families
antenna for GSM modem FASTRACK
code: MP009/1
antenna for GSM modem FASTRACK
AC/DC adapter 230Vac to 24Vdc/1A, switch-mode
code: A1940
AC/DC adapter 230Vac to 24Vdc/1A, switch-mode
Communication cable for GSM modem
code: QMS2901
Communication cable for GSM modem
Transducer USB/RS232 complete
code: MP006
Transducer USB/RS232 complete
Self Adhesive Dual Lock
code: MD036
Self Adhesive Dual Lock
Wall holder for GPRS modem
code: MP036
Wall holder for GPRS modem
DIN Rail 35mm holder for GPRS modem
code: MP037
DIN Rail 35mm holder for GPRS modem
One time fee for using M2M server - applied for each data logger with modem
code: SLU302
One time fee for using M2M server - applied for each data logger with modem
Start/stop magnet
code: LP004
Start/stop magnet
USB adapter
code: LP003
USB adapter
USB adapter cable USB A/female - Micro USB/male - OTG
code: OTG
USB adapter cable USB A/female - Micro USB/male - OTG
COM adapter with protection IP65
code: LP012
COM adapter with protection IP65
LAN adapter with 0.5 meter cable
code: LP005
LAN adapter with 0.5 meter cable
LAN adapter with 5 meter cable
code: LP005-5
LAN adapter with 5 meter cable
Lithium battery 3,6V/AA
code: A4203
Lithium battery 3,6V/AA
plastic sensor protection with stainless filter (gray)
code: F5200
plastic sensor protection with stainless filter (gray)
PTFE sensor protection, white
code: F5300
PTFE sensor protection, white
sintered bronze sensor cover
code: F0000
sintered bronze sensor cover
wall holder for datalogger
code: F9000
wall holder for datalogger
Self Adhesive Dual Lock
code: MD036
Self Adhesive Dual Lock
Vessel for adjustment and calibration of humidity
code: MD046
Vessel for adjustment and calibration of humidity
Humidity Standard 10%RH, set 5pcs
code: HM023
Humidity Standard 10%RH, set 5pcs
Humidity Standard 80%RH, set 5pcs
code: HM024
Humidity Standard 80%RH, set 5pcs

30 other products in the same category: