DS1996L-F5 64-kbit Plus Time Memory iButton

The DS1996L Memory iButton is a rugged read/write data carrier that acts as a localized database that can be easily accessed with minimal hardware. The nonvolatile memory offers a simple solution to storing and retrieving vital information pertaining to the object to which the iButton is attached. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return.

The scratchpad is an additional page that acts as a buffer when writing to memory. Data is first written to the scratchpad where it can be read back. After the data has been verified, a copy scratchpad command will transfer the data to memory. This process ensures data integrity when modifying the memory. A 48-bit serial number is factory lasered into each DS1996L to provide a guaranteed unique identity which allows for absolute traceability.

The durable MicroCan package is highly resistant to environmental hazards such as dirt, moisture, and shock. Its compact button-shaped profile is self-aligning with mating receptacles, allowing the DS1996L to be easily used by human operators. Accessories permit the DS1996L to be mounted on almost any surface including plastic key fobs, photo-ID badges and printed circuit boards.

Applications include access control, work-in-progress tracking, electronic travelers, storage of
calibration constants, and debit tokens.

Special Features
65536 bits of read/write nonvolatile memory
Overdrive mode boosts communication speed to 142 kbits per second
256-bit scratchpad ensures integrity of data transfer
Memory partitioned into 256-bit pages for packetizing data
Data integrity assured with strict read/write protocols
Operating temperature range from -40°C to +70°C
Over 10 years of data retention

Common iButton Features

Unique, Factory-Lasered and Tested 64-bit Registration Number (8-bit Family Code + 48-bit Serial Number + 8-bit CRC Tester) Assures Absolute Traceability Because No Two Parts are Alike
Multidrop Controller for MicroLAN
Digital Identification and Information by Momentary Contact
Chip-Based Data Carrier Compactly Stores Information
Data Can be Accessed While Affixed to Object
Economically Communicates to Bus Master with a Single Digital Signal at 16.3kbps
Standard 16mm Diameter and 1-Wire® Protocol Ensure Compatibility with iButton® Family
Button Shape is Self-Aligning with Cup-Shaped Probes
Durable Stainless Steel Case Engraved with Registration Number Withstands Harsh Environments
Easily Affixed with Self-Stick Adhesive Backing, Latched by its Flange, or Locked with a Ring Pressed onto its Rim
Presence Detector Acknowledges When Reader First Applies Voltage
Meets UL#913 (4th Edit.); Intrinsically Safe Apparatus, Approved under Entity Concept for use in Class I, Division 1, Group A, B, C and D Locations

F5 MicroCAN
 

SOFTWARE for iButton: