CU Specimen Holder

CU Specimen Holder

CU Specimen Holder

Reference: CU - Manufacturer: WonATech-ZIVE LAB

Select Model

- Copper rod with Au or Cu plated clip
- Length : 25 cm

Accessory Catalog

Download (1.37MB)

Viewed products

PAL-1 Pocket Digital Refractometer

PAL-1 Pocket Digital Refractometer 2

SENSORS & PROBES

Atago PAL-1 Pocket Digital Refractometer (Ref: 3810)

► Indicated to measure almost any type of fruit, food, drinks, soups, sauces, ketchup, tomato sauces, jams or low sugar preserves.► The digital refractometers of the PAL range are small, which allows them to be transported comfortably, and used both in laboratories and in field work.

16 other products in the same category:

PFL Plate Electrode

Accessories (Cells, Electrodes, Kits, etc.)

PFL Plate Electrode

WonATech-ZIVE LAB

View

BB Series

BB Series 2

Accessories (Cells, Electrodes, Kits, etc.)

BB Black Box

WonATech-ZIVE LAB

View

PCELL3 Photoelectrochemical Cell Kit (With A Specimen Holder)

PCELL3 Photoelectrochemical Cell Kit (With A Specimen Holder) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL3 Photoelectrochemical Cell Kit (with Specimen Holder)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Cell kit with specimen holder•...

View

CCH2 / CCH2L Coin Cell Holder for WBCS / WMPG Series

CCH2 / CCH2L Coin Cell Holder for WBCS / WMPG Series 2

Accessories (Cells, Electrodes, Kits, etc.)

CCH2 Coin Cell Holder for WBCS / WMPG Series

WonATech-ZIVE LAB

Ordering Guide:

View

cX Series Cell Voltage / Temp Monitoring System

cX Series Cell Voltage / Temp Monitoring System 2

Accessories (Cells, Electrodes, Kits, etc.)

cX Series Coin Cell Voltage / Temp Monitoring System

WonATech-ZIVE LAB

The cell voltage & temperature monitoring system, cX series, is a flexible systems to monitor voltage and temperature, and it is also suitable for use in a wide variety of applications.The system has 16 voltage monitoring channels and can be extended to up to 128 channels. On the other hand, it provides 8 channels of temperature monitoring which is...

View

FCK2 Flat Cell Kit (Standard Type)

FCK2 Flat Cell Kit (Standard Type) 2

Accessories (Cells, Electrodes, Kits, etc.)

FCK2 Flat Cell Kit (Standard Type)

WonATech-ZIVE LAB

The flat cell kit was designed to evaluate plate material such as metal (coupons), semi-conducting plate, etc. A sample plate will be placed one sample holder by fixing knob and maximum 300ml sample volume is acceptable. A water jacketed version is also available. A graphite plate which is placed in one side of the cell is supplied with a cell and can be...

View

CCK Corrosion Cell Kit

CCK Corrosion Cell Kit 2

Accessories (Cells, Electrodes, Kits, etc.)

CCK Corrosion Cell Kit

WonATech-ZIVE LAB

The CCK series corrosion cell kit is based on a standard glass reaction flask, 1 liter, 500 ml or 100ml. All wetted parts are made of chemically resistant materials such as Teflon, Pyrex and SUS 316. The standard cell configuration consists of a cylindrical metal sample working electrode, a graphite rod, a counter electrode, a gas bubbling tube, and a...

View

MCC Membrane Conductivity Cell

MCC Membrane Conductivity Cell 2

Accessories (Cells, Electrodes, Kits, etc.)

MCC Membrane Conductivity Cell

WonATech-ZIVE LAB

- Four electrode technique- Material - Cell body: PEEK - Wire: platinum- Operating temperature: to 130 ̊C- Fuel cell hardware available: 5, 9 and 25 cm2 fuel cell test hardware (not included, provided by WonATech)- Easy to assemble

View

PCELL1 Photoelectrochemical Cell Kit (Standard Model)

PCELL1 Photoelectrochemical Cell Kit (Standard Model) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL1 Photoelectrochemical Cell Kit (Standard Model)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • standard type• one optical window...

View

CCH3 Coin Cell Holder for ZIVE Series

CCH3 Coin Cell Holder for ZIVE Series 2

Accessories (Cells, Electrodes, Kits, etc.)

CCH3 Coin Cell Holder for ZIVE Series

WonATech-ZIVE LAB

Ordering Guide:

View

FSH15 Flat Specimen Holder

FSH15 Flat Specimen Holder 2

Accessories (Cells, Electrodes, Kits, etc.)

FSH15 Flat Specimen Holder

WonATech-ZIVE LAB

View

PCELL2 Photoelectrochemical Cell Kit (2 Optical Windows)

PCELL2 Photoelectrochemical Cell Kit (2 Optical Windows) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL2 Photoelectrochemical Cell Kit (with 2 Optical windows)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Two optical windows arranged to...

View

Farad2 Faraday Cage

Farad2 Faraday Cage 2

Accessories (Cells, Electrodes, Kits, etc.)

Farad2 Faraday Cage

WonATech-ZIVE LAB

View

PTC2 Plate Cell Kit (Electrochemistry / EIS)

PTC2 Plate Cell Kit (Electrochemistry / EIS) 2

Accessories (Cells, Electrodes, Kits, etc.)

PTC2 Plate Cell Kit (Electrochemistry / EIS)

WonATech-ZIVE LAB

The plate test cell, PTC2, is a simple cell for electrochemical testing of coated samples. Also it can be a perfect choice for measuring EIS(Electrochemical Impedance Spectroscopy) of painted metal specimens. The PTC2/PCT015 are very easy to assemble.

View

PTC1 Plate Test Cell Kit

PTC1 Plate Test Cell Kit 2

Accessories (Cells, Electrodes, Kits, etc.)

PTC1 Plate Test Cell Kit

WonATech-ZIVE LAB

The Plate Test Cell Kit (PTC1) is designed to evaluate plate material such as metal, semi-conducting plate, etc. In evaluation, a sample plate will be placed between two cell blocks. Counter electrode (graphite rod or Pt wire type) and reference electrode should be ordered separately.

View

PGE Gauze Electrode

PGE Gauze Electrode 2

Accessories (Cells, Electrodes, Kits, etc.)

PGE Gauze Electrode

WonATech-ZIVE LAB

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow