CCK Corrosion Cell Kit
CCK Corrosion Cell Kit
CCK Corrosion Cell Kit
CCK Corrosion Cell Kit
CCK Corrosion Cell Kit
CCK Corrosion Cell Kit
CCK Corrosion Cell Kit
CCK Corrosion Cell Kit

CCK Corrosion Cell Kit

Reference: CCK - Manufacturer: WonATech-ZIVE LAB

The CCK series corrosion cell kit is based on a standard glass reaction flask, 1 liter, 500 ml or 100ml. All wetted parts are made of chemically resistant materials such as Teflon, Pyrex and SUS 316. The standard cell configuration consists of a cylindrical metal sample working electrode, a graphite rod, a counter  electrode, a gas bubbling tube, and a reference electrode in a Luggin capillary. A graphite rod as counter electrode, a reference electrode and a flat specimen holder could be ordered separately as an option. The water-jacketed type corrosion cell kit and alkaline resistance cell kit made with Teflon are also available.

help_outlineAsk for Quote

CCK Corrosion Cell Kit

I accept privacy policy rules  

 

Available modes:

CCK1 Corrosion Cell Kit, 1 liter, Standard Type Does not include electrodes
CCK01 Corrosion Cell Kit, 100ml, Standard Type Consisting of: Gas bubbler, Cell top, & Cell clamp Does not include electrodes
CCK01T Corrosion Cell Kit, 100ml, Standard Type Teflon vial Consisting of: Does not include electrodes
CCK05 Corrosion Cell Kit, 500ml, Standard Type Does not include electrodes
WCCK1 Corrosion Cell Kit, 1 liter, Water-jacketed Type Does not include electrodes
WCCK05 Corrosion Cell Kit, 500ml, Water-jacketed Type

Parts Included:
1. Cell Vial Pyrex®, O-ring type beaker, 1L, Ø103(OD)*157(H)
2. Cylindrical Metal Sample & Tube Steel / Quartz tube, Ø6.35* Ø4.35
3. Cell Clamp Stainless steel
4. Luggin Capillary Pyrex®
5. Bubbler Adapter Gas Inlet Pyrex®
6. Cell Top Teflon®
7. Other miscellaneous such as stopper / O-ring MC Nylon® / Viton®

ZIVE SP2 Potentiostat + EIS 2MHz (- Compliance: ±12V - Max. Current: ±2A, 0.6fA) ZIVE SP2 Potentiostat + EIS 2MHz (- Compliance: ±12V - Max. Current: ±2A, 0.6fA) 2
Potentiostats Mono-Multichannel, Impedance, FRA's

ZIVE SP2 Potentiostat + EIS 2MHz (- Compliance: ±12V - Max. Current: ±2A, 0.6fA)

WonATech-ZIVE LAB
ZIVE SP2
The best choice for the complete DC and impedance characterization of various electrochemical applications. The system is designed under FPGA and DSP control with high speed capability.DAC Control: Two sets of high speed 16bit DAC (50 MHz) for offset & scanning & one set of 16bit DAC (1 MHz) for auxiliary analog output controlADC Reading: Two sets...
View
ZIVE SP5 Potentiostat + EIS 1MHz (Compliance: ±10V - Max. Current: ±5A) ZIVE SP5 Potentiostat + EIS 1MHz (Compliance: ±10V - Max. Current: ±5A) 2
Potentiostats Mono-Multichannel, Impedance, FRA's

ZIVE SP5 Potentiostat + EIS 1MHz (Compliance: ±10V - Max. Current: ±5A, 1.5 fA)

WonATech-ZIVE LAB
ZIVE SP5
The best choice for the complete DC and impedance characterization of various energy source and storage such as fuel cell, battery, solar cell, supercapacitor, etc. Also, its versatile functions make it suited to other applications including corrosion, coatings, sensors and other fundamental electrochemical analysis. The system is designed under FPGA and...
View

You might also like

ZIVE SP2 Potentiostat + EIS 2MHz (- Compliance: ±12V - Max. Current: ±2A, 0.6fA) ZIVE SP2 Potentiostat + EIS 2MHz (- Compliance: ±12V - Max. Current: ±2A, 0.6fA) 2
Potentiostats Mono-Multichannel, Impedance, FRA's

ZIVE SP2 Potentiostat + EIS 2MHz (- Compliance: ±12V - Max. Current: ±2A, 0.6fA)

WonATech-ZIVE LAB
ZIVE SP2
The best choice for the complete DC and impedance characterization of various electrochemical applications. The system is designed under FPGA and DSP control with high speed capability.DAC Control: Two sets of high speed 16bit DAC (50 MHz) for offset & scanning & one set of 16bit DAC (1 MHz) for auxiliary analog output controlADC Reading: Two sets...
View
ZIVE SP5 Potentiostat + EIS 1MHz (Compliance: ±10V - Max. Current: ±5A) ZIVE SP5 Potentiostat + EIS 1MHz (Compliance: ±10V - Max. Current: ±5A) 2
Potentiostats Mono-Multichannel, Impedance, FRA's

ZIVE SP5 Potentiostat + EIS 1MHz (Compliance: ±10V - Max. Current: ±5A, 1.5 fA)

WonATech-ZIVE LAB
ZIVE SP5
The best choice for the complete DC and impedance characterization of various energy source and storage such as fuel cell, battery, solar cell, supercapacitor, etc. Also, its versatile functions make it suited to other applications including corrosion, coatings, sensors and other fundamental electrochemical analysis. The system is designed under FPGA and...
View

16 other products in the same category:

PCELL2 Photoelectrochemical Cell Kit (2 Optical Windows) PCELL2 Photoelectrochemical Cell Kit (2 Optical Windows) 2
Accessories (Cells, Electrodes, Kits, etc.)

PCELL2 Photoelectrochemical Cell Kit (with 2 Optical windows)

WonATech-ZIVE LAB
PCELL2
€4,995.00
The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Two optical windows arranged to...
View
Product added to wishlist
Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow