Catalog
Loading...
fuentes RSS
No RSS feed added
The kit includes everything necessary to carry out geoelectrical surveys with V.H.R. (Very high resolution - resolution: 24 bit) multielectrode in multichannel mode that allows to drastically reduce the recording time in 3D surveys. The instrument can manage 96 electrodes without using expansion boxes. The kit also includes all accessories and data...
CTS120 is a probe to measure in soils, length: 120 cm, which allows to carry out practical and quick measurements of thermal conductivity (or thermal resistivity) in the medium in which it is inserted at a precise level.
Water level indicator with temperature sensor and down-hole indicator.
Horizontal geophone 4.5 Hz with 1 mt cable, level bubble, double clip or split-spring (single spring) connector available upon request.
Model FRT-50 - Water Level Indicator With Temperature Sensor and Bottom-Hole Indicator
Metodology: Ground thermal conductivityTCR24 is designed to measure soil heat transmission (soil tendency to transmit heat).This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. 2 years warranty.Measurement can be done on site...
Dynamic surveys on structures Seismic vibration monitoring
Georesistivimeter for quadrupole measurements
STRENGTHS:► Parallelization of measurements for pole-dipole, pole-pole, dipole-dipole and three-dimensional configurations► 24-bit resolution► Pseudosection in real time ► Allows VES and tomography surveys.
The X824S is a top-range seismograph equipped with 24 to 96 embedded channels for both active and passive seismic surveys. The basic configuration starts with 24 channels and can be expanded in 24-channel increments, up to a maximum of 96 integrated channels, without requiring external boxes. The instrument features a built-in PC with a 10” monitor...
ST3 integrates within an acquisition board equipped with 3 channels with 24 bit resolution for each channel and a 3D sensor with geophones with a natural frequency of 2 Hz.The instrument is managed via a laptop or tablet PC connected to the instrumentation via a USB connection.
The kit includes everything necessary to perform very high resolution (24-bit resolution) geoelectric surveys through the multi-electrode method in multichannel mode, which drastically reduces the recording time in 3D studies. The instrument can manage 48 electrodes without using expansion boxes. The kit includes everything necessary for V.E.S. Surveys...
The kit includes everything necessary to carry out geoelectrical surveys with V.H.R. (Very high resolution - resolution: 24 bit) multielectrode in multichannel mode that allows to drastically reduce the recording time in 3D surveys. The instrument can manage 72 electrodes without using expansion boxes. The kit also includes all accessories and data...
WCH4 is an innovative modular wireless instrument for cross-hole tests on foundation poles. The cross-hole is a method to analyze the foundation poles of buildings that, with the use of ultra-sounds, crosshole, allow to carry out an accurate high resolution test. An ultra-sonic wave is sent from a transmitter to a receiver, which are convoyed...