Environment

- Highest precision GHI measurements and lowest uncertainty with Class A pyranometer- DNI measurement with <5% uncertainty.- No solar tracker required- MODBUS 485 RTU digital output for DNI, GHI, DHI

PL400R-B

€930.00

Heated Rain gauge (max 150W) in accordance to WMO norms Class A according to UNI 11452:2012.

SENSORS & PROBES

6415 Davis Ultrasonic Anemometer

Davis

6415

€650.00

The ultrasonic anemometer, developed to measure wind conditions without moving parts.

MS-90 Plus+ Solar Monitoring Station without Trackers

SENSORS & PROBES

MS-90 Plus+ Solar Monitoring Station without Trackers

Eko Instruments

MS-90 Plus+

View

SS1-STD3 SunScan Canopy Analysis System for Crops

SENSORS & PROBES

SS1-STD3 SunScan Canopy Analysis System for Crops

Measures incident and transmitted PAR in canopies Direct display of Leaf Area Index (LAI) Usable in cloudy and clear conditions Proven, research-grade canopy analyser Ideal for phenotyping applications

SS1-STD3

€6,130.00

ENVIRONMENTAL PRODUCTS

HMV-TD2 Telescopic Tripod for SLM10 (for HemiView camera)

HMV-TD2

Suitable for SLM10 Camera Mount and DCM10 cameras

View

WEATHER S. ACCESSORIES

HEMI-CC1 Protective Case

HEMI-CC1

Protective, impact resistant case to hold DCM9 camera, SCL9 fisheye lens and SLM9 camera mount.

View

SENSORS & PROBES

SPT401.001/W INDUSTRIAL CONDUCTIVITY PROBES

SPT401.001/W

Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.

View

SENSORS & PROBES

SPTKI10

SPTKI10

Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.

View

SENSORS & PROBES

SPTKI12 Combined Industrial Conductivity and Temperature 4-wire Pt100 probe

SPTKI12

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.

View

SENSORS & PROBES

SPTKI13 Combined industrial Conductivity and Temperature probe with 2 PT electrodes.

SPTKI13

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.

View

SENSORS & PROBES

SPT86 4-electrode combined Conductivity & Temperature probe with Pt100 sensor.

SPT86

- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.

View

SENSORS & PROBES

SPTKI11 Combined industrial conductivity and temperature probe in Rytron

SPTKI11

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C.

View

CM 1000 Software (for FieldScout CM1000 Chlorophyll Meter)

CHLOROPHYLL CONCENTRATION

2950S Software (for FieldScout CM1000 Chlorophyll Meter)

Spectrum Technologies

2950S

€290.00

CM 1000 Software required for to activate the data logger

Colorimeters

TCM500 NDVI FieldScout Turf Color Meter

Spectrum Technologies

TCM500 NDVI

€1,195.00

Reflectance of red light (660 nm) and NIR (850 nm) to measure the turf canopy and the Normalized Difference Vegetation Index (NDVI). Ref.: 2975NDVI

SENSORS & PROBES

TP475A.O Air probe

TP475A.O

View

SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC)

ACCESORIES

SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC)

SPT10G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.

View

SPT1G Combined Conductivity and Temperature Probe

ACCESORIES

SPT1G Combined Conductivity and Temperature Probe

SPT1G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1.

View

ACCESORIES

SPT01G Combined Conductivity and Temperature Probe

SPT01G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1

View

SP06T Conductivity (5µS/cm to 200mS/cm) and Temperature combined probe (Cell constant 0.7)

ACCESORIES

SP06T Conductivity (5µS/cm to 200mS/cm) and Temperature combined probe (Cell constant 0.7)

Transport case provides safe storage of the device, the power adapter and measuring probes during transport. Accessories are protected by a closable partition.External case dimensions: 357x305x95mm.

SP06T

- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.

View

Comet System

BM511 Case for Multilogger

Comet System

BM511

View

M1322 Thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals Multilogger

M1322 Thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals Multilogger 2

MULTIFUNCTION

M1322 MultiLogger Meter Thermo-hygro-CO2 with 2 MiniDIN and 2 Terminals

Comet System

M1322

€895.00

SENSORS & PROBES

SFT Heat Flux Sensor for Soil

Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.

SFT

€660.00

FMU-2000P Portable Ultrasonic Flowmeter 2

SENSORS & PROBES

FMU-2000P Portable Ultrasonic Flowmeter (DN15mm to DN6000mm)

MRC

FMU-2000P

3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃

View

W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox

INSIDE & OUTSIDE USE

W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox

Comet System

W8810

€465.00

The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision

S-SO2 European Gas Sensor for measurement of SO2 Sulfur dioxide (100ppm)

Air quality

S-SO2 European Gas Sensor for measurement of SO2 Sulfur dioxide (100ppm)

S-SO2

€1,650.00

S-SO2 "

FS5021 Flow transmitter duct for airflow, volume flow and temperature, active output (0-10V or 4-20mA)

FS5021 Flow transmitter duct for airflow, volume flow and temperature, active output (0-10V or 4-20mA) 2

SENSORS & PROBES

FS5021 Transmitter for Air Flow and Volume Flow + Temperature for Air Conducts (output...

Fuehler Systeme

FS5021

€270.00

- 0-20 m/s, 0...+50°C, 0-200.000 m³/h - 0-10 V, 4-20 mA - LCD display, relay - 5 scales per device

FS4083 Multi-sensor Version with Display

SENSORS & PROBES

FS4083 Multisensor for CO2, VOC, Temperature and Humidity (0-10V) for Indoor Use.

Fuehler Systeme

FS4083

€532.00

0-2000/5000/10000 ppm mixed gas VOC temperature, humidity 0-10 V, relay LCD-Display

FS1308 Transmitter particulate matter / particles, digital output Modbus

FS1308 Transmitter particulate matter / particles, digital output Modbus 2

SENSORS & PROBES

FS1308 Transmitter particulate matter/particles PM2.5/PM10, digital output Modbus

Fuehler Systeme

FS1308

€537.00

0 μg/m³ ... 1000 μg/m³ Modbus LCD-Display

SENSORS & PROBES

PR2 SDI-12 - PR2 Profile Probe – SDI-12 version

SDI-12 compatibility allows integration into new and existing SDI-12 systems.The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. - Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable- Enables the creation of low cost highly flexible sensor networks- Compatible with existing PR2 access tubes and...

PR2 SDI-12

€1,580.00

ST15 Perimeter Bands for Perimeter Dendrometers

ST15 Perimeter Bands for Perimeter Dendrometers 2

SENSORS & PROBES

ST20 Perimeter Bands for Perimeter Dendrometers

EMS

ST20

€70.00

Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.

LUX-B Luxmeter - connection to MCS module

LUX-B Luxmeter - connection to MCS module 2

SENSORS & PROBES

LUX-B Luxmeter 0 ÷ 200klux with 4-20mA Output