Shopping Cart
Salt-11 LAQUATwin Salinity Meter (2 Electrodes Bipolars AC)
SALT‐11, Salt by EC sensor
The only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
- Minimum sample volume: 0.12ml
- Salinity and temperature display
- Up to 2 calibration points
- Auto calibration
- Auto standard recognition: 0.50 & 5.00 % NaCl
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- 2 Salinity curves: NaCl & Seawater
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years - meter, 6 months - sensor
- Packed in handy carrying case
- Supplied with 0.5% & 5.0% NaCl standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
|
Model |
Salt-11 |
|---|---|
|
Measurement Principle |
2 Electrode Bipolar AC |
|
Minimum Sample Volume |
0.12ml |
|
Salinity Range & Resolution |
0.0 to 100.0 g/L (ppt): 0.1 g/L 0.00 to 10.00%: 0.01% |
|
Calibration Points |
Up to 2 |
|
Calibration Curves |
NaCl & Seawater |
|
Accuracy |
±2% full scale (0.0 to 9.9 g/L) ± 4% full scale (10.0 to 100.0 g/L) |
|
Temperature Display |
0 to 50.0 ºC |
|
Temperature Calibration |
5 to 40.0 ºC |
|
Display |
Custom (monochrome) digital LCD with backlight |
|
Operating Temperature |
5 to 40.0 ºC |
|
Operating Humidity |
85% or less relative humidity (no condensation) |
|
Power |
CR2032 batteries (2) |
|
Battery Life |
Approx. 400 hours in continuous use without backlight |
|
Material |
ABS epoxy body & titanium coated with platinum black sensor |
|
Dimensions |
164 x 29 x 20 mm (excluding projections) |
|
Mass |
Approx. 50 g (including sensor and batteries) |
|
Functions |
|
* Note: g/L is equivalent to parts per thousand (ppt)
- With Display
- LCD
- The Sensor measures:
- Salinity
- Power Supply:
- 2 Batteries CR2032
You might also like
Viewed products
INSIDE & OUTSIDE USE
Portable heat flux sensor, with read-out unit / datalogger (HF03-LI19)
16 other products in the same category:
DATA LOGGERS FOR MONITORING ENERGY
RPS50 Multiscale single Rogowski Coil Integrator (outputs 1 or 3V rms or 0-10Vdc)
Tap to zoom
