FS5020 Flow transducer for duct, laminar airflow and temperature, active output (0-10V or 4-20mA)

View larger

FS5020 Laminar Duct Air Flow and Volumetric Flow + Temperature Transmitter (0-10 V or 4-20 mA output)

Reference

Manufacturer: Fuehler Systeme

Condition: New

0-5 m/s, 0...+50°C
0-10 V, 4-20 mA
LCD display, relay
5 scales per device

More info about this product.

Share on Facebook!
Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

263,00 €

tax excl.

Quantity

Select Model

Add to wishlist

OVERVIEW
SPECIFICATIONS
MODELS
Data sheet

The Sensor measures:	Laminar Air Flow & Temp.
Output Signal:	0-10 V or 4-20 mA
Power Supply:	24 Vdc
Sensor for use in:	Indoor

The flow transmitter FS5020 detects the laminar air flow and the temperature in air ventilation ducts. The transmitter converts the measurement values into a linear 0-10V or 4-20mA output for further processing.
As an option, a potential-free changeover contact and / or a backlit LCD display are available.
The content of the backlit display can be rotated by the menu in 90 ° increments. The actual value, the set switching threshold, the relay status, the MIN / MAX measured values of the selected interval, etc. can be read off.
The airflow sensor works according to the calorimetric measuring principle and has 5 freely selectable scalings, which can simply be switched over as required by innovative DIP-switch technology.
In addition, the switching threshold, hysteresis etc. can be specified.

Measuring principle	calorimetric measuring method
Measurement range flow	0-5 m/s
Scales	0-1 m/s, 0-2 m/s, 0-3 m/s, 0-4 m/s, 0-5 m/s
Measurement range temp.	0...+50°C
Accuracy	±0,3 m/s + max. ±4% FS (@ 20°C, 45% r.H., 1013 mbar), ±0,5 K (@ 20°C, > 1 m/s)
Temperature dependency	±1% FS / 10 K
Long term stability	±1% FS/year, ±0,2 K/year
Response time (t90)	> 4 s @ 10 m/s
Running-in time	< 30 s at initial operation because of tempering
Output attentuation	5 s
Supply voltage	24 V AC/DC
Current consumption at 0-10 V	Ø 100 mA
Current consumption at 4-20 mA	< 140 mA
Current consumption at relay	< 120 mA
Analogue output 0-10 V	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA	3-wire connection, max. RLoad(Ohm) = 300 Ohm
Alarm output	1 x potential-free change-over contact, 48 V, 1 A
Hysteresis	5% Span, adjustable with display devices
Electrical connection	screw terminals max. 1,5 mm²
Housing	Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
Cable gland	PG11 high-strength cable gland with strain relief
Display	optional 2-line LCD-Display, to display the measured values on location
Material	Protection tube: stainless steel VA 1.4571
Protection type	Housing/electronic: IP65, Sensor: IP30
Protection class	III
Working range	0,3-20 m/s
Working temperature	-20...+60°C
Storage temperature	-20...+50°C
Installation	mounting flange (in scope of delivery)
Approvals	CE, EAC, RoHS

REF.	Flow	Temperature	Output	Equipment
FS5020-I-F1-DR	0-5 m/s	-	4-20 mA	Display, Relay
FS5020-I-F1-R	0-5 m/s	-	4-20 mA	Relay
FS5020-I-F1T1-DR	0-5 m/s	0...+50°C	4-20 mA	Display, Relay
FS5020-I-F1T1-R	0-5 m/s	0...+50°C	4-20 mA	Relay
FS5020-U-F1-DR	0-5 m/s	-	0-10 V	Display, Relay
FS5020-U-F1-R	0-5 m/s	-	0-10 V	Relay
FS5020-U-F1T1-DR	0-5 m/s	0...+50°C	0-10 V	Display, Relay
FS5020-U-F1T1-R	0-5 m/s	0...+50°C	0-10 V	Relay
FS5020-X-F1-R	0-5 m/s	-	-	Relay