CCH2 Coin Cell Holder for WBCS / WMPG Series

WonATech

CCH2 Coin Cell Holder for WBCS / WMPG Series

WonATech

CCH2 Coin Cell Holder for WBCS / WMPG Series

Reference: CCH2 - Manufacturer: WonATech-ZIVE LAB

Ordering Guide:

Select Model

- Direct connect to WBCS’s cell connector
- For 2016, 2025, 2032 coin cell
-- Please specify coin cell size when ordering

Accessory Catalog

Download (1.37MB)

WPG100HP High Power Potentiostat / Galvanostat

WPG100HP High Power Potentiostat / Galvanostat 2

Potentiostats Mono-Multichannel, Impedance, FRA's

WPG100HP High Power Potentiostat / Galvanostat (4 kWatt)

WonATech-ZIVE LAB

The system hardware is based on WPG potentiostat / galvanostat and designed for high power application such as battery pack, solar module, and fuel cell stack, electroplating etc with 3 current ranges. Maximum power is 4 kWatt and the customize specification is available within this power. The WPG100HP is designed with a local area network (LAN) for...

View

You might also like

WPG100HP High Power Potentiostat / Galvanostat

WPG100HP High Power Potentiostat / Galvanostat 2

Potentiostats Mono-Multichannel, Impedance, FRA's

WPG100HP High Power Potentiostat / Galvanostat (4 kWatt)

WonATech-ZIVE LAB

The system hardware is based on WPG potentiostat / galvanostat and designed for high power application such as battery pack, solar module, and fuel cell stack, electroplating etc with 3 current ranges. Maximum power is 4 kWatt and the customize specification is available within this power. The WPG100HP is designed with a local area network (LAN) for...

View

16 other products in the same category:

CU Specimen Holder

Accessories (Cells, Electrodes, Kits, etc.)

CU Specimen Holder

WonATech-ZIVE LAB

View

FCK2 Flat Cell Kit (Standard Type)

FCK2 Flat Cell Kit (Standard Type) 2

Accessories (Cells, Electrodes, Kits, etc.)

FCK2 Flat Cell Kit (Standard Type)

WonATech-ZIVE LAB

The flat cell kit was designed to evaluate plate material such as metal (coupons), semi-conducting plate, etc. A sample plate will be placed one sample holder by fixing knob and maximum 300ml sample volume is acceptable. A water jacketed version is also available. A graphite plate which is placed in one side of the cell is supplied with a cell and can be...

View

Farad2 Faraday Cage

Farad2 Faraday Cage 2

Accessories (Cells, Electrodes, Kits, etc.)

Farad2 Faraday Cage

WonATech-ZIVE LAB

View

UEH1 Universal Electrode Holder

UEH1 Universal Electrode Holder 2

Accessories (Cells, Electrodes, Kits, etc.)

UEH1 Universal Electrode Holder

WonATech-ZIVE LAB

The universal electrode holder(UEH1) having 4 holes are suitable for holding various sizes of electrode by turning the screws. The material of plate is Teflon®, which has high resistance to chemicals and its white color helps user to recognize a tiny change of samples during experiments.

View

MUX8B Multiplexer for Zive Potentiostat

MUX8B Multiplexer for Zive Potentiostat 2

Accessories (Cells, Electrodes, Kits, etc.)

MUX8B Multiplexer for Zive Potentiostats

WonATech-ZIVE LAB

The multiplexer, MUX8B, is designed for use with the ZIVE SP2, SP5 single channel potentiostat, BP2 dual potentiostat and MP2, MP5 multichannel potentiostat.The MUX8B allows user to covert the single channel potentiostat or multichannel potentiostat into a powerful instrument suitable for sequential 8 cell operation per channel.Although up to eight cells...

View

cXSoftware Software for Cell Voltage / Temp Monitoring System

cXSoftware Software for Cell Voltage / Temp Monitoring System 2

Accessories (Cells, Electrodes, Kits, etc.)

cXSoftware Software for Cell Voltage / Temp Monitoring System

WonATech-ZIVE LAB

View

PCELL1 Photoelectrochemical Cell Kit (Standard Model)

PCELL1 Photoelectrochemical Cell Kit (Standard Model) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL1 Photoelectrochemical Cell Kit (Standard Model)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • standard type• one optical window...

View

PFL Plate Electrode

Accessories (Cells, Electrodes, Kits, etc.)

PFL Plate Electrode

WonATech-ZIVE LAB

View

FSH15 Flat Specimen Holder

FSH15 Flat Specimen Holder 2

Accessories (Cells, Electrodes, Kits, etc.)

FSH15 Flat Specimen Holder

WonATech-ZIVE LAB

View

PGE Gauze Electrode

PGE Gauze Electrode 2

Accessories (Cells, Electrodes, Kits, etc.)

PGE Gauze Electrode

WonATech-ZIVE LAB

View

cX Series Cell Voltage / Temp Monitoring System

cX Series Cell Voltage / Temp Monitoring System 2

Accessories (Cells, Electrodes, Kits, etc.)

cX Series Coin Cell Voltage / Temp Monitoring System

WonATech-ZIVE LAB

The cell voltage & temperature monitoring system, cX series, is a flexible systems to monitor voltage and temperature, and it is also suitable for use in a wide variety of applications.The system has 16 voltage monitoring channels and can be extended to up to 128 channels. On the other hand, it provides 8 channels of temperature monitoring which is...

View

PTC1 Plate Test Cell Kit

PTC1 Plate Test Cell Kit 2

Accessories (Cells, Electrodes, Kits, etc.)

PTC1 Plate Test Cell Kit

WonATech-ZIVE LAB

The Plate Test Cell Kit (PTC1) is designed to evaluate plate material such as metal, semi-conducting plate, etc. In evaluation, a sample plate will be placed between two cell blocks. Counter electrode (graphite rod or Pt wire type) and reference electrode should be ordered separately.

View

PCELL2 Photoelectrochemical Cell Kit (2 Optical Windows)

PCELL2 Photoelectrochemical Cell Kit (2 Optical Windows) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL2 Photoelectrochemical Cell Kit (with 2 Optical windows)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Two optical windows arranged to...

View

MCC Membrane Conductivity Cell

MCC Membrane Conductivity Cell 2

Accessories (Cells, Electrodes, Kits, etc.)

MCC Membrane Conductivity Cell

WonATech-ZIVE LAB

- Four electrode technique- Material - Cell body: PEEK - Wire: platinum- Operating temperature: to 130 ̊C- Fuel cell hardware available: 5, 9 and 25 cm2 fuel cell test hardware (not included, provided by WonATech)- Easy to assemble

View

PCELL3 Photoelectrochemical Cell Kit (With A Specimen Holder)

PCELL3 Photoelectrochemical Cell Kit (With A Specimen Holder) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL3 Photoelectrochemical Cell Kit (with Specimen Holder)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Cell kit with specimen holder•...

View

PTC2 Plate Cell Kit (Electrochemistry / EIS)

PTC2 Plate Cell Kit (Electrochemistry / EIS) 2

Accessories (Cells, Electrodes, Kits, etc.)

PTC2 Plate Cell Kit (Electrochemistry / EIS)

WonATech-ZIVE LAB

The plate test cell, PTC2, is a simple cell for electrochemical testing of coated samples. Also it can be a perfect choice for measuring EIS(Electrochemical Impedance Spectroscopy) of painted metal specimens. The PTC2/PCT015 are very easy to assemble.

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow