Shopping Cart
OM-CP-HITEMP140 Data logger of Temperature for Autoclaves
- Datalogger for autoclaves with accuracy ±0. 1° C
- Runs up to 140° C
- Submersible (IP68)
- User replaceable batteries
- Reusable
- Start and end of the programmable register
- Probes of different lengths depending on the model
Notes: Comes complete with 3.6V lithium battery and NIST Calibration certificate.
Operation manual and USB station and Software are included with Sw OM-CP-IFC400 (required for data logging, sold separately).
The OM-CP-HITEMP140 is a dataloggerde robust temperature and high precision that is built for use in hostile environments. This steel device is waterproof and can withstand temperatures up to 140° c with an accuracy of ±0. 1° C in this interval. The probe, 50 mm in length (depending on model), is capable of measuring temperatures extended up to 260 ° C provided that the main body does not exceed 140 ° C making it ideal for autoclaves.
For autoclaves data logger can store up to 32,700 readings with date and time. Solid-State non-volatile memory retains data even if the battery is discharged.
Using the software start, stop, and transfer data from the OM-CP-HITEMP140 is simple and easy. Graphed can be and tabulate the data to provide an analysis. The data can also be exported as automatically to Excel for further analysis.
| Temperature Sensor: 100Ω Platinum RTD Temperature Range (Body): -40 to 140°C (-200 to 250°C with thermal shield, time limited) Temperature Measurement Range (Probe): -200 to 260°C Temperature Resolution: 0.01°C Calibrated Accuracy: ±0.1°C [-20 to 140°C] Start Modes: • Software programmable immediate start • Delay start up to eighteen months in advance Real Time Recording: May be used with PC to monitor and record data in real time Memory: 32,700 readings Reading Rate: One second up to once every 24 hours Battery Type: 3.6V high-temperature lithium battery (included) Battery Life: 1 year typical [1 minute reading rate at 25°C] |
Calibration: Digital calibration through software Calibration Date: Automatically recorded within device Data Format: Date and time stamped °C, °F, K, °R Time Accuracy: ±1 minute/month at 20 to 30°C (RS-232 cable not in use). Computer Interface: OM-CP-IFC400 USB docking station required. 125,000 baud Software: XP SP3/Vista/Windows® 7 (32- and 64-bit) Operating Environment: -40 to 140°C, 0 to 100% RH, 0.002PSIA to 100PSIA Dimensions Body: 48 H x 25 mm D Probe: 50 L x 3.8 to 3.2 mm transitional dia (other probe lengths are available, contact sales) Weight: 120 g Material: 316 stainless steel |
TSK: Thermal Shield for OM-CP-HITEMP140 data logger.
IFC400: USB dock station, software and manual.
- Environment of Use
- Indoor/Outdoor
- Type of Logger
- Portable
- Application
- Autoclaves
- Number of Channels
- 1
- Battery Life
- 2 years
16 other products in the same category:
INSIDE & OUTSIDE USE
U3631M IoT T/Rel. Humidity GSM Datalogger with connector for other temp. probes
- Pack
WATER (TEMP, LEVEL & QUALITY)
DS1922E+DS9107 Data Logger for Monitoring Temperature sea Water, Sterilization...
INSIDE & OUTSIDE USE
IoT-Logger - Wireless logger with built-in GSM modem and SIM card
INSIDE & OUTSIDE USE
HD 35ED 7P/1 TC Wireless Temperature Data Logger (-200ºC a +650ºC)
INSIDE & OUTSIDE USE
HD 35EDW 1NR TC Temperature, Humidity and Solar Radiation Wireless Data Logger
INSIDE & OUTSIDE USE
RX3000-WIFI/ETHERNET HOBO WEATHER STATION RX3001: ETHERNET RX3002: WIFI
INSIDE & OUTSIDE USE
LP 35 PAR04BL Radiometric Probe to Measure Photon Flow
Tap to zoom
