7682S LAQUA Potassium Ion Electrode Tip

Horiba

7682S LAQUA Potassium Ion Electrode Tip

Horiba

7682S LAQUA Potassium Ion Electrode Tip

Reference: 7682S (3200697413) - Manufacturer: HORIBA

Replacement electrode tip for combination and half-cell potassium ion electrodes

The Sensor measures:: Potassium Ions

English Brochure

Download (3.07MB)

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S)

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S) 2

Electrodes

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S)

6582S-10C (3200697409)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

You might also like

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S)

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S) 2

Electrodes

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S)

6582S-10C (3200697409)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

Viewed products

FCPc-PEM FUEL CELL STACKS

FCPc-PEM FUEL CELL STACKS 2

Home

FCPc-PEM FUEL CELL STACKS

Fuel Cell Systems available of 50W (100W special model), designed to facilitate system integration.Based on an open-cathode PEM fuel cell architecture, the system offers good power densities, minimum balance-of-plant requirements and simplicity of operation.The fuel cell controller is equiped with on-board measurements and analog transmission. When the...

View

16 other products in the same category:

RREF0021 Single Junction Silver Chloride (Ag/AgCl) Reference Electrode

RREF0021 Single Junction Silver Chloride (Ag/AgCl) Reference Electrode 2

Electrodes & Accessories from Pine Research

RREF0021 Single Junction Silver Chloride (Ag/AgCl) Reference Electrode

The standard single junction silver/silver chloride (Ag/AgCl) reference electrode is filled with 4M KCl with AgCl solution. The reference electrode fits through the standard 14/20 ground glass joints found on our standard electrochemical cells. A PTFE sleeve (included) facilitates mounting the reference electrode in the joint. Includes 14/20 PTFE...

9681S-10D LAQUA Electrode pH 3 in 1 ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples)

9681S-10D LAQUA Electrode pH 3 in 1 ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples) 2

Electrodes

9681S-10D LAQUA Electrode pH 3 in 1 ToupH Sleeve with Glass Body (for Viscous and...

9681S-10D (3200585463)

This glass-body, refillable pH electrode with integrated temperature sensor gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints).- The liquid junction is designed with a movable sleeve that prevents clogging. - Easy to clean and provides quick stable readings- Waterproof, Pb-free glass

3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use) Conductivity Cell

3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use) Conductivity Cell 2

Electrodes

3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use)...

3562-10D (3014082513)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

9615S-10D LAQUA Electrode pH 3 - 1 Standard ToupH with Glass Body (General Laboratory Applications)

9615S-10D LAQUA Electrode pH 3 - 1 Standard ToupH with Glass Body (General Laboratory Applications) 2

Electrodes

9615S-10D LAQUA Electrode pH 3 - 1 Standard ToupH with Glass Body (General Laboratory...

9615S-10D (3200585428)

This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.Previous model: 9625-10D, 9611-10D- Offers quick stability and drift reduction- Constructed with responsive glass that is 10x stronger than JIS standards- The dome-shaped tip provides...

6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S)

6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S) 2

Electrodes

6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S)

6583S-10C (3200697410)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

7681S LAQUA Nitrate Ion Electrode Tip

7681S LAQUA Nitrate Ion Electrode Tip 2

Electrodes

7681S LAQUA Nitrate Ion Electrode Tip

7681S (3200697412)

View

6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S)

6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S) 2

Electrodes

6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S)

6581S-10C (3200697408)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

AFCTR5 Standard Platinum Counter Electrode Kit

AFCTR5 Standard Platinum Counter Electrode Kit 2

Electrodes & Accessories from Pine Research

Standard Platinum Counter Electrode Kit AFCTR5

Pt wire OD = 0.5 mm; approximate surface area = 4.7 cm26.9 mm OD x 150 mm epoxy tube shroudCompatible with our standard electrochemical cells It includes an isolation tube and an adapter to fit 14/20 port 6.9 mm OD epoxy tube shroud, 150 mm long.

View

9415-10C LAQUA Standard Combined pH Electrode ToupH Glassware Body (General Laboratory Applications)

9415-10C LAQUA Standard Combined pH Electrode ToupH Glassware Body (General Laboratory Applications) 2

Electrodes

9415-10C LAQUA Standard Combined pH Electrode ToupH Glassware Body (General Laboratory...

9415-10C (3200611623)

This glass-body, refillable pH electrode is recommended for a wide range of applications, including pH buffers and aqueous test solutions.- Offers quick stability and drift reduction- Constructed with responsive glass that is 10x stronger than JIS standards- The dome-shaped tip provides strength in all directions, reducing damage concerns- Waterproof,...

View

3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water) Conductivity Cell

3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water) Conductivity Cell 2

Electrodes

3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water)...

3553-10D (3014081714)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode)

2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode) 2

Electrodes

2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode)

2060A-10T (3014080434)

Suitable for a wide range of pH measurements since the resistance of the liquid junciton is small

View

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell) 2

Electrodes

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)

1066A-10C (3014080432)

Very durable minimum alkali errors. Most widely used for general pH measurements.

View

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S) 2

Electrodes

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C (3200697407)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature Sensor

9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature Sensor 2

Electrodes

9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature...

9382-10D (3014046709)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and Non-Aqueous Solvents)

6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and Non-Aqueous Solvents) 2

Electrodes

6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and...

6377-10D (3014093085)

The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents.

View

7683S Calcium Ion Electrode Tip for LAQUA

7683S Calcium Ion Electrode Tip for LAQUA 2

Electrodes

7683S LAQUA Calcium Ion Electrode Tip

7683S (3200697414)

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow