Air Quality Monitoring

1
…
23
24
25
…
34

SD-TEMP-P-06 Temperature sensor for pipes

SD-TEMP-P-06 Temperature sensor for pipes 2

SENSORS & PROBES

SD-TEMP Temperature sensor for pipes & walls

Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls

SD-TEMP-xx Air/Water/Soil HOBO Temperature Sensor

SD-TEMP-xx Air/Water/Soil HOBO Temperature Sensor 2

SENSORS & PROBES

SD-TEMP-xx Air/Water/Soil HOBO Temperature Sensor

Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in lengths of 0.3 m (1 ft), 1.8 m (6 ft), 6.1 m, (20 ft) & 15.2 m (50 ft)

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor 2

SENSORS & PROBES

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

1.8m Self Describing Stainless Steel HOBO Temperature Sensor. Self-Describing technology for quick, easy setup Locking jack to ensure sensor is connected and stay connected Food-grade stainless-steel temperature probe Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6...

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable 2

SENSORS & PROBES

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable

- Self-Describing technology for quick, easy setup- Locking jack to ensure cable is connected and stays connected- Measurement range: - 0 to 2.5 V (w / SD-VOLT-2.5) - 0 to 5 V (w / SD-VOLT-05) - 0 to 10 V (w / SD-VOLT-10) - 0 to 24 V (w / SD-VOLT-24)- Accuracy: - ± 0.1 mV ± 0.1% of reading (w / SD-VOLT-2.5) - ± 0.2 mV ± 0.3%...

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor 2

SENSORS & PROBES

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure cable is connected and stays connected Measurement range of 0 to 20.1 mA Accuracy of ±0.001 mA ± 0.2.% of absolute current Cable length: 47 cm (18.5 in)

AO-HT-2000

CO2 Carbon Dioxide

AO-HT-2000 CO2, Temp. & Rel. Humidity Meter

The AO-HT-2000 carbon dioxide meter is widely used in factories, workshops, greenhouses, clean rooms, industry and agriculture, bars and restaurants, hotels, hospitals, markets and shops, airports, train and bus stations, halls of entertainment, theaters and cinemas, etc.

View

AO-HT-1000 Carbon Monoxide Meters

AO-HT-1000 Carbon Monoxide Meters 2

AO-Electronics

AO-HT-1000 CO Carbon Monoxide Meters

AO-HT-1000 carbon monoxide meters detects the presence of CO and measures concentrations between 1-1000ppm

View

AO-K-600-O3 Ozone O3 Gas Detector

AO-K-600-O3 Ozone O3 Gas Detector 2

GAS ANALYZERS

AO-K-600-O3 Single Gas Detector (0 - 20ppm)

- Electrochemical Sensor.- O3 alarm: 5 and 10 ppm* Built-in 32-bit MCU, high reliability and self-adaptive capacity. Other Gases Detected (See Specifications and Consult Prices):Combustible gas (CH4, C3H8, H2) and toxic gas, oxygen, other rare toxic gases such as ammonia, NO, PH3, NH3, NO2, HCN, SO2, etc. also available, can be specified by the customer...

View

FAT-B Air Flow Sensor (0 ÷ 5m/s) Indoors Anemometric

FAT-B Air Flow Sensor (0 ÷ 5m/s) Indoors Anemometric 2

SENSORS & PROBES

FAT-B Air Flow Sensor (0 ÷ 5m/s) Indoors Anemometric

Highlighted specs:• Temperature and Air Flow sensor for indoorapplications• High sensibility: 0.01 m/s• Selectable signal output (voltage or current)• Easy to install• According to CE norms

AIS-1 Microbial Air Sampler

AIS-1 Microbial Air Sampler 2

AIR QUALITY

AIS-1 Microbial Air Sampler (Microbial Contamination Analyzer)

Widely used in pharmaceutical company, milk product plant, clinical operation room, fermentation industry et al, where microbial contamination needs to be strictly monitored and controlled. Also it is applicable in institutes that need study of the air microbial condition.

KSW-CO2 CO2 and air quality meter

KSW-CO2 CO2 and air quality meter 2

SENSORS & PROBES

KSW-CO2 CO2 and air quality meter

The KSW-CO2 Carbon Dioxide detector can also measure the temperature and relative humidity of the environment.

TR-71NW Ethernet / LAN Temperature Recorder

TR-71NW Ethernet / LAN Temperature Recorder 2

INSIDE & OUTSIDE USE

TR-71NW Ethernet / LAN Temperature Recorder

Temperature and Humidity Data Logger made for the Cloud. Recorded data can automatically be uploaded via wireless or wired LAN to our free cloud service "T&D WebStorage Service" where it can be accessed from anywhere you have a connection.

Showing 277-288 of 397 item(s)

1
…
23
24
25
…
34

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow