Onset

SD-TEMP-P-06 Temperature sensor for pipes

SD-TEMP-P-06 Temperature sensor for pipes 2

SENSORS & PROBES

SD-TEMP Temperature sensor for pipes & walls

Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls

SD-TEMP-xx Air/Water/Soil HOBO Temperature Sensor

SENSORS & PROBES

SD-TEMP-xx Air/Water/Soil HOBO Temperature Sensor

Onset

SD-TEMP-xx

€58.00

Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in lengths of 0.3 m (1 ft), 1.8 m (6 ft), 6.1 m, (20 ft) & 15.2 m (50 ft)

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

SENSORS & PROBES

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

Onset

SD-TEMP-SS

€119.00

1.8m Self Describing Stainless Steel HOBO Temperature Sensor. Self-Describing technology for quick, easy setup Locking jack to ensure sensor is connected and stay connected Food-grade stainless-steel temperature probe Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6...

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable

SENSORS & PROBES

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable

Onset

SD-VOLT-xx

€39.00

- Self-Describing technology for quick, easy setup- Locking jack to ensure cable is connected and stays connected- Measurement range: - 0 to 2.5 V (w / SD-VOLT-2.5) - 0 to 5 V (w / SD-VOLT-05) - 0 to 10 V (w / SD-VOLT-10) - 0 to 24 V (w / SD-VOLT-24)- Accuracy: - ± 0.1 mV ± 0.1% of reading (w / SD-VOLT-2.5) - ± 0.2 mV ± 0.3%...

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

SENSORS & PROBES

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

Onset

SD-MA-420

€49.00

Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure cable is connected and stays connected Measurement range of 0 to 20.1 mA Accuracy of ±0.001 mA ± 0.2.% of absolute current Cable length: 47 cm (18.5 in)

INSIDE & OUTSIDE USE

RX2100 HOBO MicroRX Compact Weather Station

Onset

RX2100

€762.00

The compact and field rugged HOBO MicroRX Station is an easy-to-use and low-cost cellular solution for long-term, reliable monitoring in the field .There are two power source options available: a solar panel for extended deployments, and user-replaceable batteries for flexible mounting in covered or protected locations.The station includes inputs for up...

COUPLER2-A Couplers for HOBO Data Loggers and Shuttle U-DTW-1 and Base Station-U4

INSIDE & OUTSIDE USE

COUPLER2-A Couplers for HOBO Data Loggers with Shuttle U-DTW-1 and Base Station-U4

Onset

COUPLER2-HOBO

€15.00

Couplers compatible with HOBO Shuttle U-DTW-1 and HOBO Base Station-U4 for data loggers:- HOBO Pendant (Model: Coupler2-A)- HOBO U20 Water Level (Model: Coupler2-B)- HOBO U22 / U24 / U26 / U20L (Model: Coupler2-C)- HOBO TidbiT v2 (Model: Coupler2-D)- HOBO U23 Pro V2 (Model: Coupler2-E)

INSIDE & OUTSIDE USE

CO2 Bluetooth Smart CO2/Temperature / Relative Humidity Logger for Interior Air Quality...

Onset

MX1102A

€630.00

The HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments.MX1102 measures CO2 from 0 to 5,000 ppm – and the free HOBOconnect app allows you to access your data from your mobile phone or tablet within a 30 meter range of the logger.MX1102 also features a USB port so it may be...

WATER (TEMP, LEVEL & QUALITY)

HOBO Water Level (30 ft, 0-4m) Logger U20L-04

Onset

U20L-04

€400.00

Onset Data Loggers Onset Computer Corporation

WATER (TEMP, LEVEL & QUALITY)

HOBO Water Level (30 ft, 0-30,6m) Logger U20L-02

Onset

U20L-02

€400.00

Onset Data Loggers Onset Computer Corporation

SENSORS & PROBES

RXW-T12-868 HOBOnet T12 Soil Moisture/Temp/EC Sensor, RXW-T12

Onset

RXW-T12-868

€754.99

A complete system requires:- at least one HOBO RX3000 Remote Monitoring Station- a HOBOnet Wireless Manager (RXMOD-RXW)- a HOBOnet Wireless Sensor, or- one HOBO MicroRX station (which has an integrated HOBOnet Wireless Manager) and a HOBOnet Wireless Sensor.- HOBOnet Wireless Repeaters (RXW-RPTR or RXW-RPTR-B) can be added to extend the range.

HOBOnet Repeater (incl. lithium batteries), RXW-RPTR-B

HOBOnet Repeater (incl. lithium batteries), RXW-RPTR-B 2

SENSORS & PROBES

HOBOnet Repeater (incl. lithium batteries), RXW-RPTR-B-868

Onset

RXW-RPTR-B-868

€145.00

A complete system requires:- a HOBO MicroRX Station, which has an integrated HOBOnet Wireless Manager, and a HOBOnet Wireless Sensor.- a HOBOnet Wireless Repeater (RXW-RPTR-B-xxx) can be added to extend the range of both system options.

HOBOnet T11 RXW-T11 Soil Temperature / Humidity Sensor

HOBOnet T11 RXW-T11 Soil Temperature / Humidity Sensor 2

SENSORS FOR WEATHER STATIONS

RXW-T11-868 HOBOnet T11 Soil Temperature / Humidity Sensor

Onset

RXW-T11-868

€679.99

pH Calibration Solution for HOBO MX2501, pH 4.01, 475 ml, Ref.: MX2500-CAL-4

WATER (TEMP, LEVEL & QUALITY)

pH Calibration Solution for HOBO MX2501, 475 ml, Ref.: MX2500-CAL

Onset

MX2500-CAL

€29.00

These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.

WATER (TEMP, LEVEL & QUALITY)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

Onset

MX2500-CAL-KIT

€79.00

This Calibration Kit includes three buffer solutions in 475 mLiter bottles:- pH 4.01- pH 7.00- pH 10.00and two 4 oz. calibration beakers (MX2500-CAL-BKR)

Replacement Electrode for HOBO MX2500, Ref.: MX2500-Electrode

WATER (TEMP, LEVEL & QUALITY)

Replacement Electrode for HOBO MX2501, Ref.: MX2500-Electrode

Onset

MX2500-Electrode

€185.00

The gel electrolyte and double Pellon® junction of this electrode minimizes the chance of contamination of the reference electrolyte. The plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are very suited for environmental monitoring of lakes, streams, rivers, estuaries, and oceans.The electrode uses sample potentiometric and...

SENSORS & PROBES

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

Onset

MX2500-GUARD

€39.00

This Anti-Biofouling Copper Guard may be used in addition to the standard electrode guard for extra protection against biofouling during logger uset.The anti-biofouling guard uses copper to reduce biofouling, while it still allowsproper water to flow around the sensor.The copper protects the data logger by interacting with the chemistry of the water in...

SENSORS & PROBES

End cap for HOBO MX2501, Ref .: MX2500-End-Cap

Onset

MX2500-End-Cap

€175.00

WEATHER S. ACCESSORIES

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

Onset

MX2500-MAINT-KIT

€119.00

This Maintenance Kit includes a Calibration Kit (MX2500-CAL-KIT) and an Electrode Storage Solution (MX2500-STORE-SOLN).

Electrode Storage Solution for MX2501 Logger (475 mL), Ref.: MX2500-STORE-SOLN

WEATHER S. ACCESSORIES

Electrode Storage Solution for MX2501 Logger electrodes (475 mL), Ref.: MX2500-STORE-SOLN

Onset

MX2500-STORE-SOLN

€42.00

This Electrode Storage Solution is utilised to properly store and condition the pH electrode that is used with the HOBO MX2501 pH Data Logger.The purpose of this storage solution is to maintain the hydrated gel layer that is integral to accurate pH readings.

WEATHER S. ACCESSORIES

CABLE-DR-xxx - Direct Read Cable for MX2001

Onset

CABLE-DR

€230.00

- The direct read cable provides the connection between the HOBO MX2001 logger’s top-end unit and the water level sensor.

Water Level Sensor, Ref.: MX2001-04-SS-S

SENSORS & PROBES

Water Level Sensor, Ref.: MX2001-04-SS-S

Onset

MX2001-S

€450.00

Sensor Heads for Bluetooth Data Logger for Fresh Water (Water Level and Temperature) MX200 water level, water pressure and temperature.They require cable and a data logger.

View

Titanium Bluetooth Water Level & Temperature Logger, MX2001-Ti

Titanium Bluetooth Water Level & Temperature Logger, MX2001-Ti 2

WATER (TEMP, LEVEL & QUALITY)

Titanium Bluetooth Data Logger for Salt Water (Water Level and Temperature), MX2001-Ti

Onset

MX2001-Ti

€1,000.00

Titanium Water Level Recorder BlueTooth BLE (Bluetooth Low Energy).Includes 5 meter cable Ref .: CABLE-DR-5.0Optional Cables: 10m, 15m, 30m, 60m and from 5m to 500m.Custom cable lengths up to 500m on request.Depth ranges available: 4m, 9 meters. BUYING IN BULK, OR JUST WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our "More info about this...

WELL-CAP-01 locking well cap for mounting HOBO loggers in wells

WEATHER S. ACCESSORIES

WELL-CAP-01 locking well cap for mounting HOBO loggers in wells

Onset

WELL-CAP-01

€68.00

- The locking well cap "WELL-CAP-01" provides appropiate mounting for HOBO data loggers in wells.- It is used with the HOBO MX2001 and supports the logger at the top of the well for an optimal wireless transmission range.

SENSORS & PROBES

Water Level Sensor Cable for RX2100, CABLE-RWL

Onset

CABLE-RWL

€136.99

Showing 176-200 of 235 item(s)