Electrode Storage Solution for MX2501 Logger (475 mL), Ref.: MX2500-STORE-SOLN

Electrode Storage Solution for MX2501 Logger (475 mL), Ref.: MX2500-STORE-SOLN

Electrode Storage Solution for MX2501 Logger electrodes (475 mL), Ref.: MX2500-STORE-SOLN

Reference: MX2500-STORE-SOLN - Manufacturer: Onset

This Electrode Storage Solution is utilised to properly store and condition the pH electrode that is used with the HOBO MX2501 pH Data Logger.
The purpose of this storage solution is to maintain the hydrated gel layer that is integral to accurate pH readings.

€42.00

Tax excluded Envío: 3 a 6 semanas

Accessories: Maintenance Kits

MX2500-STORE-SOLN Data Sheet

Download (56.21KB)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

WATER (TEMP, LEVEL & QUALITY)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

This Calibration Kit includes three buffer solutions in 475 mLiter bottles:- pH 4.01- pH 7.00- pH 10.00and two 4 oz. calibration beakers (MX2500-CAL-BKR)

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

SENSORS & PROBES

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

This Anti-Biofouling Copper Guard may be used in addition to the standard electrode guard for extra protection against biofouling during logger uset.The anti-biofouling guard uses copper to reduce biofouling, while it still allowsproper water to flow around the sensor.The copper protects the data logger by interacting with the chemistry of the water in...

End cap for HOBO MX2501, Ref .: MX2500-END-CAP

SENSORS & PROBES

End cap for HOBO MX2501, Ref .: MX2500-End-Cap

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

WEATHER S. ACCESSORIES

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

MX2500-MAINT-KIT

This Maintenance Kit includes a Calibration Kit (MX2500-CAL-KIT) and an Electrode Storage Solution (MX2500-STORE-SOLN).

MX2501 Low Cost pH and Temperature Logger

MX2501 Low Cost pH and Temperature Logger 2

WATER (TEMP, LEVEL & QUALITY)

MX2501 Low Cost pH and Temperature Logger

Easy data offload to mobile devices via BLE! The new low-cost HOBO® MX2501 pH and temperature recorder is designed for long-term pH monitoring in estuaries, lakes, streams, rivers and oceans. It communicates wirelessly via Bluetooth Low Energy (BLE) to the HOBOmobile® application on your phone or tablet, making it easier and faster to install, calibrate...

pH Calibration Solution for HOBO MX2501, pH 4.01, 475 ml, Ref.: MX2500-CAL-4

WATER (TEMP, LEVEL & QUALITY)

pH Calibration Solution for HOBO MX2501, 475 ml, Ref.: MX2500-CAL

These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.

Replacement Electrode for HOBO MX2500, Ref.: MX2500-Electrode

WATER (TEMP, LEVEL & QUALITY)

Replacement Electrode for HOBO MX2501, Ref.: MX2500-Electrode

MX2500-Electrode

The gel electrolyte and double Pellon® junction of this electrode minimizes the chance of contamination of the reference electrolyte. The plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are very suited for environmental monitoring of lakes, streams, rivers, estuaries, and oceans.The electrode uses sample potentiometric and...

You might also like

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

WATER (TEMP, LEVEL & QUALITY)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

This Calibration Kit includes three buffer solutions in 475 mLiter bottles:- pH 4.01- pH 7.00- pH 10.00and two 4 oz. calibration beakers (MX2500-CAL-BKR)

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

SENSORS & PROBES

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

This Anti-Biofouling Copper Guard may be used in addition to the standard electrode guard for extra protection against biofouling during logger uset.The anti-biofouling guard uses copper to reduce biofouling, while it still allowsproper water to flow around the sensor.The copper protects the data logger by interacting with the chemistry of the water in...

End cap for HOBO MX2501, Ref .: MX2500-END-CAP

SENSORS & PROBES

End cap for HOBO MX2501, Ref .: MX2500-End-Cap

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

WEATHER S. ACCESSORIES

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

MX2500-MAINT-KIT

This Maintenance Kit includes a Calibration Kit (MX2500-CAL-KIT) and an Electrode Storage Solution (MX2500-STORE-SOLN).

MX2501 Low Cost pH and Temperature Logger

MX2501 Low Cost pH and Temperature Logger 2

WATER (TEMP, LEVEL & QUALITY)

MX2501 Low Cost pH and Temperature Logger

Easy data offload to mobile devices via BLE! The new low-cost HOBO® MX2501 pH and temperature recorder is designed for long-term pH monitoring in estuaries, lakes, streams, rivers and oceans. It communicates wirelessly via Bluetooth Low Energy (BLE) to the HOBOmobile® application on your phone or tablet, making it easier and faster to install, calibrate...

pH Calibration Solution for HOBO MX2501, pH 4.01, 475 ml, Ref.: MX2500-CAL-4

WATER (TEMP, LEVEL & QUALITY)

pH Calibration Solution for HOBO MX2501, 475 ml, Ref.: MX2500-CAL

These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.

Replacement Electrode for HOBO MX2500, Ref.: MX2500-Electrode

WATER (TEMP, LEVEL & QUALITY)

Replacement Electrode for HOBO MX2501, Ref.: MX2500-Electrode

MX2500-Electrode

The gel electrolyte and double Pellon® junction of this electrode minimizes the chance of contamination of the reference electrolyte. The plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are very suited for environmental monitoring of lakes, streams, rivers, estuaries, and oceans.The electrode uses sample potentiometric and...

Viewed products

Data Loggers for Dendrometers and Sap Flow Sensors DL18-BLE

INSIDE & OUTSIDE USE

DL18-BLE Bluetooth-BLE Data Loggers for Dendrometers and Sap Flow Sensors

Mini-Systems with Data Logger DL18-BLE

LP 35 PHOT Photometric Probe for Measuring Illuminance

INSIDE & OUTSIDE USE

LP 35 PHOT Photometric Probe for Measuring Illuminance

SENSECA (Delta Ohm)

Photometric probe for measuring illuminance, CIE photopic filter, spectral response according to the standard photopic curve, diffuser for cosine correction. Measuring range: 0.1 ... 200,000 lux. Cable length 5 m M12 connector.

View

16 other products in the same category:

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

WATER (TEMP, LEVEL & QUALITY)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

This Calibration Kit includes three buffer solutions in 475 mLiter bottles:- pH 4.01- pH 7.00- pH 10.00and two 4 oz. calibration beakers (MX2500-CAL-BKR)

CS10R Heated shielded sensor-Datalogger cable, 10m

SENSORS & PROBES

CS10R Heated sensor-Datalogger cable, 10m

Sensor-Datalogger cable, terminated with end sleeves on Datalogger side and 7 pole IP68 connector on sensor side. 10m lenght.

HD2005 KIT TRIPODE

HD2005 KIT TRIPODE 2

SENSORS & PROBES

HD2005 KIT TRIPODE

SENSECA (Delta Ohm)

Bird spikes for Professional Rain Gauge

SENSORS & PROBES

Bird spikes for Professional Rain Gauge

Bird spikes for Professional Rain Gauges – Item 500.319For Professional 300.021 and 300.0231 set consist of 6 spikes in aluminium.

Bluetooth interface for Teros sensors, Ref .: AO-ZSC

Bluetooth interface for Teros sensors, Ref .: AO-ZSC 2

SENSORS & PROBES

Bluetooth interface for Teros sensors, Ref .: AO-ZSC

Sensor readings on your SmartPhone ZSC Bluetooth SIS - Sensor Interface - stereo

SPN1-SD Desiccant

SPN1-SD Desiccant 2

SENSORS & PROBES

SPN1-SD Desiccant

ODOS-5005 Replacement Optical Sensor Cap

ODOS-5005 Replacement Optical Sensor Cap 2

SENSORS & PROBES

Replacement Optical Sensor Cap ODOS-5005

Replacement cover for the ODOS-5000 sensor. The only part that can suffer wear - the sensor cap is robust and simply interchangeable with 24 months warranty.

View

MX2301A HOBO Temperature/RH Data Logger

MX2301A HOBO Temperature/RH Data Logger 2

Onset

MX2301A HOBO Temperature/RH Bluetooth BLE Data Logger

HOBO MX2301 data logger with weatherproof internal Temp / HR probes and data transfer via Bluetooth via a mobile device (smartphone or tablet).

3663A Solar Radiation Shield

3663A Solar Radiation Shield 2

WEATHER S. ACCESSORIES

3663 Solar Radiation Shield

Spectrum Technologies

Radiation Shield for the WatchDog 1000 Series Micro Stations and the WatchDog A-Series Data Loggers. Protect your Micro Station or A-Series data logger from rain and measurement-distorting solar radiation.Works with WathcDog 1000 Series Micro Stations and WatchDog A-Series Loggers only.

pH Calibration Solution for HOBO MX2501, pH 4.01, 475 ml, Ref.: MX2500-CAL-4

WATER (TEMP, LEVEL & QUALITY)

pH Calibration Solution for HOBO MX2501, 475 ml, Ref.: MX2500-CAL

These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.

MX2305 HOBO Temperature Bluetooth BLE Data Logger

MX2305 HOBO Temperature Bluetooth BLE Data Logger 2

Onset

MX2305 HOBO Temperature Bluetooth BLE Data Logger

HOBO MX2305 weatherproof data logger with internal Temperature probe and data transfer via Bluetooth via a mobile device (smartphone or tablet).

PALTA6 6m Pneumatic Telescopic Mast for Weather Station

PALTA6 6m Pneumatic Telescopic Mast for Weather Station 2

WEATHER S. ACCESSORIES

PALTA6 6m Pneumatic Telescopic Mast for Weather Station

Pneumatic Telescopic Mast for Weather Station

View

AO-7716-Kit Guy Wire Kit for Weather Stations 6 Masts

WEATHER S. ACCESSORIES

AO-7716-Kit Guy Wire Kit for Weather Stations 6 Masts

CBME80B Ceilometer

CBME80B Ceilometer 2

WEATHER S. ACCESSORIES

CBME80B Lidar Ceilometer

◆ The Eliasson cloud CBME80B Ceilometer is a compact and lightweight standalone instrument that is used for accurately measuring cloud base height and vertical visibility using the LIDAR principle.◆ The light emitting component is a low power diode laser with the output power limited to an eye-safe level. ◆ It can detect up to four distinct cloud layers,...

View

LP S1

WEATHER S. ACCESSORIES

LP S1 Bracket for Mounting LP PIRG 01 Sensor from Delta-Ohm

SENSECA (Delta Ohm)

View

MX2201 HOBO Pendant® MX Temperature Data Logger

MX2201 HOBO Pendant® MX Temperature Data Logger 2

INSIDE & OUTSIDE USE

MX2201 HOBO Pendant® MX Temperature Data Logger

Group 1 The HOBO MX2201 water temperature level logger leverages the power of Bluetooth Low Energy (BLE) to deliver accurate temperature and relative light-level measurements straight to your iOS or Android mobile device. Designed for durability, this compact waterproof logger is ideal for measuring temperature in streams, lakes, oceans, and soil...

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow