ELECTROCHEMISTRY, MATERIAL SCIENCE & IMPEDANCE

1
2
3
4
…
7

Pstat Auxiliar Option Cable Assy Auxiliary A

Pstat Auxiliar Option Cable Assy Auxiliary A 2

Accessories & Cables

Pstat Auxiliar Option Cable Assy Auxiliary A

Pstat Auxiliar Option Cable Assy Auxiliary A

View

850-Multigas Auto Multigas Unit

850-Multigas Auto Multigas Unit 2

Scribner Associates

850-Multigas Auto Multigas Unit

Scribner Associates

The 850 Auto Multigas Unit is a computer controlled system featuring automated gas switching. Combined with the 885 Potentiostat, the 850 Auto Mulitgas Unit provides enhanced fuel cell diagnostic and characterization of hydrogen crossover for electrochemical surface area [ECSA] measurement by CV.

View

Flex-Stak Closed Bipolar Graphite Plate - 10 cm², Ref.: 590335

Various

Flex-Stak Closed Bipolar Graphite Plate - 10 cm², Ref.: 590335

These are closed bipolar graphite plates that can be used as replacement plates for the Flex-Stak Electrochemical Cell.You can also use them as the basis to build your own closed fuel cell.

View

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S) 2

Electrodes

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C (3200697407)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

FSH15 Flat Specimen Holder

FSH15 Flat Specimen Holder 2

Accessories (Cells, Electrodes, Kits, etc.)

FSH15 Flat Specimen Holder

WonATech-ZIVE LAB

View

Pstat Auxiliar Option Cable Assy Auxiliary B

Pstat Auxiliar Option Cable Assy Auxiliary B 2

Accessories & Cables

Pstat Auxiliar Option Cable Assy Auxiliary B

Pstat Auxiliar Option Cable Assy Auxiliary B

View

850BP+HT High-Temperature Back Pressure Unit

850BP+HT High-Temperature Back Pressure Unit 2

Scribner Associates

850BP+HT High-Temperature Back Pressure Unit

Scribner Associates

Scribner Associates At AlphaOmega-Electronics you will find the best range of Fuel Cell Test Systemand at the most competitive prices.

View

PEM Fuel Cell hardware, Serpentine flow pattern, with conditioned MEA, AO-EFC-02-50

ELECTROCHEM INC.

PEM Fuel Cell hardware, Serpentine flow pattern, with conditioned MEA, (active area: 1,...

ELECTROCHEM INC.

Proton Exchange Membrane Fuel Cell w/MEA "AO-EFC".

View

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S) 2

Electrodes

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C (3200693774)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

MCC Membrane Conductivity Cell

MCC Membrane Conductivity Cell 2

Accessories (Cells, Electrodes, Kits, etc.)

MCC Membrane Conductivity Cell

WonATech-ZIVE LAB

- Four electrode technique- Material - Cell body: PEEK - Wire: platinum- Operating temperature: to 130 ̊C- Fuel cell hardware available: 5, 9 and 25 cm2 fuel cell test hardware (not included, provided by WonATech)- Easy to assemble

View

Probble Fuel Cell Test Safety Device

Probble Fuel Cell Test Safety Device 2

NorECs

Probble Fuel Cell Test Safety Device

View

Pstat Auxiliar Option Cable Assy Auxiliary C

Pstat Auxiliar Option Cable Assy Auxiliary C 2

Accessories & Cables

Pstat Auxiliar Option Cable Assy Auxiliary C

Pstat Auxiliar Option Cable Assy Auxiliary C

View

850BP Standard Back Pressure Unit

850BP Standard Back Pressure Unit 2

Scribner Associates

850BP Standard Back Pressure Unit

Scribner Associates

Scribner Associates At AlphaOmega-Electronics you will find the best range of Fuel Cell Test Systemand at the most competitive prices.

View

K0307 Tait Cell Kit

K0307 Tait Cell Kit 2

Solartron Analytical

K0307 Tait Cell Kit

K0307 Tait Cell Kit has an industrial design for meet more robust testing needs.

View

6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S)

6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S) 2

Electrodes

6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S)

6581S-10C (3200697408)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

CoulTCell Coulometric Titration System

CoulTCell Coulometric Titration System 2

Materials Characterization

CoulTCell Coulometric Titration System

The CoulTCell is a coulometric titration setup for measurements of oxygen nonstoichiometric properties of materials at high temperatures, and in different partial pressure of oxygen. The output of these experiments can be used for the investigation of the redox behavior of nonstoichiometric materials.

View

Pstat Auxiliar Option Cable Assy Auxiliary D

Pstat Auxiliar Option Cable Assy Auxiliary D 2

Accessories & Cables

Pstat Auxiliar Option Cable Assy Auxiliary D

Pstat Auxiliar Option Cable Assy Auxiliary D

View

840 PEM Fuel Cell Test System 500W

840 PEM Fuel Cell Test System 500W 2

Scribner Associates

840 PEM Fuel Cell Test System 500W

Scribner Associates

The 840 PEM Fuel Cell Test System 500W is a turn-key test station for fuel cell research and university education programs. The 840 combines a computer-controlled instrument with fuel handling hardware in an integrated bench-top unit. The 840 is designed for use with small to large single cells or short stacks.

View

9632-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Strong Alkaline Samples)

9632-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Strong Alkaline Samples) 2

Electrodes

9632-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Strong Alkaline Samples)

9632-10D (3200524120)

This plastic-body, refillable pH electrode with integrated temperature sensor has higher resistance and longer stability than conventional electrodes. The alkali-resistant glass membrane is suitable for strong alkali samples such as plating solutions.

View

UEH1 Universal Electrode Holder

UEH1 Universal Electrode Holder 2

Accessories (Cells, Electrodes, Kits, etc.)

UEH1 Universal Electrode Holder

WonATech-ZIVE LAB

The universal electrode holder(UEH1) having 4 holes are suitable for holding various sizes of electrode by turning the screws. The material of plate is Teflon®, which has high resistance to chemicals and its white color helps user to recognize a tiny change of samples during experiments.

View

PCELL1 Photoelectrochemical Cell Kit (Standard Model)

PCELL1 Photoelectrochemical Cell Kit (Standard Model) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL1 Photoelectrochemical Cell Kit (Standard Model)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • standard type• one optical window...

View

LSH Liquid Sample Holder

Materials Characterization

LSH Liquid Sample Holder

View

FRA Cable Assy Monitor Main/Auxiliary Cable

FRA Cable Assy Monitor Main/Auxiliary Cable 2

Accessories & Cables

FRA Cable Assy Monitor Main/Auxiliary Cable

FRA Cable Assy Monitor Main/Auxiliary Cable

View

BT-112 Conductivity Cell with 4 Electrodes

BT-112 Conductivity Cell with 4 Electrodes 2

Scribner Associates

BT-112 4 Electrode Conductivity Cell (for Scribner & Fuel Cell Technologies Fuel Cell s)

Scribner Associates

The advantage of the 4-electrode in-plane conductivity measurement is the ability to measure impedance (resistance) due only to charge transport and exclude interfacial and charge transfer resistances. By considering only resistance due to ion transport, accurate assessment of in-plane membrane conductivity can be made.

View

9651-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Field Testing)

9651-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Field Testing) 2

Electrodes

9651-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Field Testing)

9651-10D (3200642020)

This plastic-body, gel-filled pH electrode with integrated temperature sensor is ideal for field testing. The body is durable and no need to refill the electrode.

View

Showing 51-75 of 158 item(s)

1
2
3
4
…
7

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow