SENSORS & PROBES SPTKI13 Combined industrial Conductivity and Temperature probe with 2 PT electrodes. SENSECA (Delta Ohm) SPTKI13 Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C. DISCONTINUED. View
SENSORS & PROBES SPT86 4-electrode combined Conductivity & Temperature probe with Pt100 sensor. SENSECA (Delta Ohm) SPT86 - 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C. View
SENSORS & PROBES SPTKI11 Combined industrial conductivity and temperature probe in Rytron SENSECA (Delta Ohm) SPTKI11 Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C. DISCONTINUED. View
ACCESORIES SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC) SENSECA (Delta Ohm) SPT10G Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10. View
ACCESORIES SPT1G Combined Conductivity and Temperature Probe SENSECA (Delta Ohm) SPT1G Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1. View
ACCESORIES SPT01G Combined Conductivity and Temperature Probe SENSECA (Delta Ohm) SPT01G Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1 View
ACCESORIES SP06T Conductivity (5µS/cm to 200mS/cm) and Temperature combined probe (Cell constant 0.7) SENSECA (Delta Ohm) SP06T - Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar. View
SENSORS & PROBES SFT Heat Flux Sensor for Soil Nesa srl SFT €660.00 Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol. Add to cart
Transmitters & Transducers DURTOX Toxic and Oxygen Detector with 4-20 mA output DURAN DURTOX €500.00 DURTOX - IP65 plastic box4-20mA detectors by electrochemical technology for the detection of oxygen and the various toxic gases:CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2DURTOX-X - ATEX Explosion Proof Box (LOM 10ATEX2076 Certif.)Models for the following gases: CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2. Add to cart
SENSORS & PROBES FMU-2000P Portable Ultrasonic Flowmeter (DN15mm to DN6000mm) MRC FMU-2000P 3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃ View
INSIDE & OUTSIDE USE W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox Comet System W8810 €465.00 The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision Add to cart
SENSORS & PROBES PR2 SDI-12 - PR2 Profile Probe – SDI-12 version Delta T PR2 SDI-12 €1,580.00 SDI-12 compatibility allows integration into new and existing SDI-12 systems.The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. - Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable- Enables the creation of low cost highly flexible sensor networks- Compatible with existing PR2 access tubes and... Add to cart
SENSORS & PROBES PL400R-N Heated Rain Gauge 400cm2 (Output signal: pulses) Nesa srl PL400R-N €780.00 Available with heater for cold climatic condition (mod. PL400R) and with MCS module for signal normalization (0÷2Vdc, 4÷ 20mA, RS485/Modbus) Add to cart
SENSORS & PROBES PL400R-A Heated Rain Gauge 400cm2 Collection Surface (Out signal: 0÷2Vdc) Nesa srl PL400R-A €890.00 Add to cart
SENSORS & PROBES PL400-B Rain Gauge 400 cm² Class A (Output: 4 ÷ 20mA) Nesa srl PL400-B €795.00 Rain gauge in accordance to WMO norms Class A according to UNI 11452:2012. Add to cart
SENSORS & PROBES LUX-B Luxmeter 0 ÷ 200klux with 4-20mA Output Nesa srl LUX-B €545.00 Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories). Add to cart
SENSORS & PROBES AO-ZPS-20 Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC AO-Electronics AO-ZPS-20 €349.00 Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC Static Pressure Tube Included & LCD Display - Field-selectable ranges and output signals - Five direct and five bidirectional standard ranges - 4-20 mA, 0-5 VDC, or 0-10 VDC output signal - Inches of water or Pascal engineering units - Optional large LCD display - Microprocessor... Add to cart
SENSORS & PROBES AO-002 Flow-Through Accesory for O2 Sensor AO-Electronics AO-002 The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes. View
SENSORS & PROBES SD-TEMP Temperature sensor for pipes & walls Onset SD-TEMP €88.00 Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls Add to cart
SENSORS & PROBES SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor Onset SD-MA-420 €49.00 Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure cable is connected and stays connected Measurement range of 0 to 20.1 mA Accuracy of ±0.001 mA ± 0.2.% of absolute current Cable length: 47 cm (18.5 in) Add to cart
Conductivity in Soil AO-520-02 Integrated Soil Moisture, Temperature & EC Sensor (0-2Vdc or RS485 or SDI-12... AO-Electronics AO-520-02 €189.00 AO-520-02 is an integrated soil moisture, temperature & electrical conductivity (EC) sensor. Optional model available for pH Range: 3-9 pH (consult) Add to cart
SENSORS & PROBES CERES Temp. Humidity & CE Soil Sensor (SDI-12 or RS485) NAZARÍES IT CERES €437.50 Sensor of the soil temperature, soil moisture, the electrical conductivity of the soil, the complex dielectric permittivity of the soil and the electrical conductivity of the "water pores" contained in the soil hole.Both the conductivity of the soil and the water of the pores are automatically compensated by the temperature. Includes standard 5 meter cable Add to cart
SENSORS & PROBES VG-SPRINKLER VegeSprinkler - WiFi Latching Sprinkler Valve Controller (4 valves) Vegetronix VG-SPRINKLER €299.00 WiFi Latching Sprinkler Controller Add to cart
SENSORS & PROBES THERM200 Soil Temperature Sensor Probes (-40 °C to 85 °C) Vegetronix THERM200 €50.00 Soil Temperature Sensor Probe Applications Environmental monitoring. Weather stations. Ice detection systems. Irrigation and sprinkler systems. Temperature monitoring of bulk foods. Add to cart