FUEL CELL HARDWARE

1
…
3
4
5
6

Hionic-10 Planar Substrate

Hionic-10 Planar Substrate 2

Substrates

Hionic-10 Planar Substrate (10x10cm)

The patented scandia doped the zirconia-based substrate for research on SOFC anode and cathode materials from medium to high temperature (700-900 ° C). The Hionic ™ offers high strength for manufacturing along with high conductivity to distinguish subtle differences between different electrode materials.

View

Test Fixture Kit 28 cm2

Equipment

Kit-Manifold-28cm2 Test Fixture Kit (Cell Test Manifold Kit)

Kit-Manifold-28cm2

The cell test collector kit (28 cm2) offers a highly effective solution for the testing of individual planar solid oxide fuel cells. The kit contains all the necessary elements to easily assemble the cells with ~ 100 cm2 of substrates. Designed for both short and long term experiments to measure properties such as fuel utilization, thermal gradients,...

View

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm) 2

Fuel Cells & Individual Cells for SOFC

ASC-2.0 Electrolyte Button Cell - Compatible with anode (20 mm)

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. Note: The 20mm diameter are for each part of the round button cell, and each cell has an...

View

PCELL3 Photoelectrochemical Cell Kit (With A Specimen Holder)

PCELL3 Photoelectrochemical Cell Kit (With A Specimen Holder) 2

Accessories (Cells, Electrodes, Kits, etc.)

PCELL3 Photoelectrochemical Cell Kit (with Specimen Holder)

WonATech-ZIVE LAB

The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Cell kit with specimen holder•...

View

BT-110 Membrane for Measuring Ionic Conductivity

BT-110 Membrane for Measuring Ionic Conductivity 2

Scribner Associates

BT-110 Membrane Clamp for Measuring Ionic Conductivity

Scribner Associates

The BT-110 Conductivity Clamp is used to obtain in-plane resistance and ionic conductivity of bare ionomer membrane samples. The Conductivity Clamp is designed to be used in a humidity chamber or in a beaker.

View

EPDM Rubber Sheet - 12" x 12"

AO-Electronics

Ref.: 590763 EPDM Rubber Sheet - 12" x 12" (SKU 99030013)

Cut your own gaskets out of this 12 inch x 12 inch sheet of high-performance EPDM (Ethylene Propylene Diene Monomer) Rubber.

View

MEA for PEM Research Cell - 5cm² - Ref.: 550025

Membrane Electrode Assemblies (MEA)

MEA for PEM Research Cell - 5cm² - Ref.: AO-550025

View

Carbon Fiber Felt Variety Kit Felt-Kit

GDL's

Carbon Fiber Felt Variety Kit Felt-Kit - Ref.: AO-590103

View

Test kit-operation of 5 cm x 5 cm

Equipment

Test kit-operation of 5 cm x 5 cm

Kit-operacion5x5cm

The operations kit consists of the items consumed during each use of the 5 cm x 5 cm test manifolds.

View

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm) 2

Fuel Cells & Individual Cells for SOFC

ASC-2.5 Electrolyte Button Cell - Compatible with anode (25 mm)

Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. (Minimum quantity: 5 units)

View

Scribner Redox Flow Cell 25cm2

Scribner Redox Flow Cell 25cm2 2

Scribner Associates

RFB-25cm2 Redox - Scribner Redox Flow Cell (Kit Hardware)

Scribner Associates

Redox Fuel Stack (Flow Stack) - Includes 1 set flow frames

View

MEA PEM-Dyneon-725-05μm-0.5mgPt-Cloth - Ref.: 74810001

Membrane Electrode Assemblies (MEA)

MEA PEM-Dyneon-725-05μm-0.5mgPt-Cloth - Ref.: AO-74810001

XICAT™ Membrane Electrode Assemblies (MEA) are highly durable and they provide ultra-high performance assemblies for use in electrochemical applications due to the use of ultra-thin composite membranes.

View

Showing 37-48 of 68 item(s)

1
…
3
4
5
6

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow