WEATHER STATIONS

Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC Static Pressure Tube Included & LCD Display - Field-selectable ranges and output signals - Five direct and five bidirectional standard ranges - 4-20 mA, 0-5 VDC, or 0-10 VDC output signal - Inches of water or Pascal engineering units - Optional large LCD display - Microprocessor...

AO-ZPS-20

€349.00

AO-002 Flow-Through Accesory for O2 Sensor

SENSORS & PROBES

AO-002 Flow-Through Accesory for O2 Sensor

The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes.

AO-002

€70.00

SD-TEMP-P-06 Temperature sensor for pipes

SD-TEMP-P-06 Temperature sensor for pipes 2

SENSORS & PROBES

SD-TEMP Temperature sensor for pipes & walls

Onset

SD-TEMP

€88.00

Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

SENSORS & PROBES

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

Onset

SD-MA-420

€49.00

Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure cable is connected and stays connected Measurement range of 0 to 20.1 mA Accuracy of ±0.001 mA ± 0.2.% of absolute current Cable length: 47 cm (18.5 in)

Conductivity in Soil

AO-520-02 Integrated Soil Moisture, Temperature & EC Sensor (0-2Vdc or RS485 or SDI-12...

Sensor of the soil temperature, soil moisture, the electrical conductivity of the soil, the complex dielectric permittivity of the soil and the electrical conductivity of the "water pores" contained in the soil hole.Both the conductivity of the soil and the water of the pores are automatically compensated by the temperature. Includes standard 5 meter cable

AO-520-02

€189.00

AO-520-02 is an integrated soil moisture, temperature & electrical conductivity (EC) sensor. Optional model available for pH Range: 3-9 pH (consult)

SENSORS & PROBES

CERES Temp. Humidity & CE Soil Sensor (SDI-12 or RS485)

NAZARÍES IT

CERES

€437.50

THERM200 Soil Temperature Sensor Probes (-40 °C to 85 °C)

SENSORS & PROBES

THERM200 Soil Temperature Sensor Probes (-40 °C to 85 °C)

Vegetronix

THERM200

€50.00

Soil Temperature Sensor Probe Applications Environmental monitoring. Weather stations. Ice detection systems. Irrigation and sprinkler systems. Temperature monitoring of bulk foods.

SENSORS & PROBES

SP-214-SS Amplified 4-20 Milliamp Pyranometer

The SP-214 is an amplified, analog sensor with a 4 to 20 mA output.The sensor incorporates a silicon-cell photodiode with a rugged, self-cleaning sensor housing design. BUYING IN BULK, OR JUST WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our More info about this product form

SP-214-SS

€430.00

HTi Instruments

AO-HT-05 Type K thermocouple probe clamp (-40 to + 200ºC)

HTi

AO-HT-05

€15.00

K Type thermocouple Clamp for industrial temperature measurements

SMR04 Online Water Quality Analyzers (RS485)

SMR04 Online Water Quality Analyzers (RS485) 2

Oxígeno Disuelto DO

SMR09 Dissolved Oxygen Analyzer Sensor for Water Quality

The Dissolved Oxygen Analyzer Sensor is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.

SMR09

View

SMR07 Probe Conductivity Analyzer for Water Quality

SENSORS & PROBES

SMR07 Probe Conductivity Analyzer for Water Quality

SMR07

IP68 conductivity analyzer (including temperrature compensation) (0~500ms/cm), POM housing, RS485 communication(3m cable)+Built-in temperaturesensor (Pt 100)(0~85℃)

View

SENSORS FOR WEATHER STATIONS

SMR12 Suspended Solids Density Analyzer

Suspended Solids Density Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.

SMR12

View

SENSORS & PROBES

SMR10 Turbidity Analyzer for Water Quality

The SMR10 turbidity analyzer is a sophisticated sensor that uses a built-in LED light source to emit a beam of 880nm.After the beam is scattered by suspended solids in the sample, the signal intensity is measured by the detector to measure the turbidity concentration of the sample.Since the LED emits 880nm near-infrared, it will not be affected by the...

SMR10

View

SENSORS & PROBES

SMR21 Submersible Water Quality Optical Nitrate (NO3-N) Analyzer

Nitrate Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.The Nitrate Meter housing in a robust IP68 proof enclosure, 1000 N tensile strength cable, up to 1.2 km digital data transmission, the Nitrate NO3-N...

SMR21

View

ART1 Multiparameter Water Quality Analyzer

ART1 Multiparameter Water Quality Analyzer 2

SENSORS & PROBES

Multiparameter Water Quality Analyzer ART1

The ART multiparameter water quality analyzer is designed especially for drinking and pure water monitoring such as free chlorine, pH, ORP, conductivity, turbidity, temperature... etc.The analyzer provides real-time, simple, reliable, cost-efficient measurements with remote monitoring, configuration and diagnostics capabilities.It is ideally installed in...

ART1

View

SENSORS & PROBES

DC2 Circumference Dendrometer 2 (for Diameters +5 cm)

Ecomatik

DC2

This sensor is discontinued, we recommend the DC3 version improved. The elastic force of the sensor is not applied in tangential, but in radial direction

View

LHS-X-18X18-XX Linear Displacement Transducer

Pot-Tech Electronics

LHS-X-18X18-XX Linear Displacement Transducer

- Non Contact Linear Position Sensor based on Hall Effect Tenology.- Accurate Linearity upto 1% F.S. or 0.5% F.S (on request)- Inbuild signal conditioner for 0-10Vdc output / 4-20mA output.- Extremely Long Life.- Extremely Compact in Size.- Short Circuit, Overvoltage and Reverse polarity protected.

LHS-X-18X18-XX

View

Pot-Tech Electronics

DWLT-X Draw Wire Linear Transducer

- Draw wire Linear Transducer (DWDT) Is a Linear Distance Measuring Transducer for a Travel upto 1500mm.- Due to Flexibility of the Wire the product is more adorable for application with long stroke measurement.- DWDT- X has a Flexibility to have a contactless absolute Hall’s magnetic encoder (for maximum 150mm length) or Muliturn potentiometer attached...

DWLT-X

View

Pot-Tech Electronics

GTS-DO Speed and Direction Sensor

- Speed and Direction sensor is based on magnetic Hall's effect Technology.- GTS-DO is Dual Output Magnetic Proximity sensor such that channel A lags or leads Channel B if used along with a gear wheel.

GTS-DO

€39.00

Pot-Tech Electronics

RSSK-12 Rotary Sensor Kit

- Non Contact Rotary Position Sensor based on Hall Effect Tenology- Accurate Linearity upto 1% F.S. or 0.5% F.S (on request)- Extremely Long Life.- Extremely Compact in Size.- Angle programmable based on customer specific requirement- Short Circuit Protected. ( For 5Vdc and PWM output versions).- Overvoltage protected. ( For 5Vdc and PWM output...

RSSK-12

View

RHSS-48 Rotary Rugged Sensor (Incremental encoder analog with Absolute encoder)

Pot-Tech Electronics

RHSS-48 Rotary Rugged Sensor

- Rotary Rugged Sensor is a transducer to detect the angle / speed of the system which correspondence to the rotary motion of the shaft. - Rotary Rugged Sensor is based on contactless Magnetic technology and hence has a very long life- This Transducer can be customised in several ways to have different Electrical angle, Voltage Output, Current Output,...

RHSS-48

View

Cable de piezómetro multipunto totalmente agrupado

Cable de piezómetro multipunto totalmente agrupado 2

RST Instruments

Fully Grouted Multi-Point Piezometer String EL380012

RST Instruments

EL380012

The piezometer cable allows multiple piezometers to be installed simply and reliably in a single well. The piezometer string and slurry tubing are placed in the well and cement and bentonite slurry is pumped until the well is filled.

View

RST Instruments

ELSGP500S Strain Gauge Piezometer

RST Instruments

ELSGP500S

View

VW0420: Vibrating Wire Isolated Analog Interface

VW0420: Vibrating Wire Isolated Analog Interface 2

RST Instruments

VW0420 Isolated Analog Interface for Vibrating Wire Sensor (4-20mA output)

RST Instruments

VW0420

◆ Maximum flexibility in connecting the system◆ 4 dielectrically isolated ground subsystem◆ Straightforward setup, easy to connect via USB cable

View

SENSORS & PROBES

HFP01-05 Heat flux plate

Hukseflux

HFP01-05

€595.00

HFP01 is the world’s most popular sensor for heat flux measurement in the soil as well as through walls and building envelopes. The total thermal resistance is kept small by using a ceramics-plastic composite body. The sensor is very robust and stable. It is suitable for long term use on one location as well as repeated installation when a measuring...

LI19 Hand-held read-out unit / datalogger

INSIDE & OUTSIDE USE

LI19 Hand-held read-out unit / datalogger

Hukseflux

LI19

LI19 is a high accuracy handheld read-out unit / datalogger.It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life...

View

HF03-LI19 heat flux sensor commonly used in fire testing

HF03-LI19 heat flux sensor commonly used in fire testing 2

INSIDE & OUTSIDE USE

Portable heat flux sensor, with read-out unit / datalogger (HF03-LI19)

Hukseflux

HF03-LI19

HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger.The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare radiation monitors and flare heat flux sensors.

View

SENSORS & PROBES

Apogee MQ-610: 400-750 nm ePAR Meter

◆ MQ-610 ePAR meter for scientists and serious growers.◆ The MQ-610 ePAR meter is the first in its class among leading scientists and serious growers for measuring accurately the new extended photosynthetically active radiation (ePAR) from 400 to 750 nm for all types of light sources.◆ It has been designed by the Apogee Instruments engineering team....

MQ-610

€795.00

MQ-510 Full-Spectrum Underwater Quantum Meter

Apogee Instruments

MQ-510 Full-Spectrum Underwater Quantum Meter

The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor dip effect correction factor to meter readings via firmware. The meter provides excellent measurements on all light sources, including LEDs.

MQ-510

€785.00

DLI-400, DLI-500, & DLI-600 PAR Light, Daily Light Integral, and hotoperiod Meters

DLI-400, DLI-500, & DLI-600 PAR Light, Daily Light Integral, and hotoperiod Meters 2

SENSORS & PROBES

DLI-500 PAR, Daily Light Integral, and Photoperiod Meters

DLI-400, DLI-500, & DLI-600 PAR, Daily Light Integral, and Photoperiod Meter. These Apogee DLI meters are a rugged, simple-to-use devices for spot checking PAR or ePAR levels while automatically recording the daily light integral and hours of light (photoperiod) for up to 99 days.

DLI-500

€429.00

SENSORS & PROBES

MQ-210X Underwater Quantum Meter

The MQ-210X quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor...

MQ-210X

€515.00

SQ-420X Apogee PAR Light Sensor with USB Output(Data Logger included)

Apogee Instruments

SQ-420X Apogee PAR Light Sensor with USB Output(Data Logger included)

The new SQ-420 is a stand-alone PAR sensor/datalogger with 10,000 measurement internal data storage that can be uploaded to a computer. If continuously connected, the software graphs real-time PPFD (Photosynthetic Photon Flux Density) 4 YEAR WARRANTY

SQ-420X

€365.00

Apogee Field Spectroradiometer (340 a 820 nm)

Apogee Field Spectroradiometer (340 a 820 nm) 2

PAR Light

SS-110 Apogee Field Spectroradiometer (340 to 820 nm)

SS-110

Buying in quantity or just want some useful advice?Call +34 916292106 or complete our form More info about this product.

View

SENSORS & PROBES

Flexible Rogowski Coil AO-YTFC