WEATHER STATIONS

SENSORS & PROBES

6415 Davis Ultrasonic Anemometer

Davis

6415

€650.00

The ultrasonic anemometer, developed to measure wind conditions without moving parts.

MS-90 Plus+ Solar Monitoring Station without Trackers

SENSORS & PROBES

MS-90 Plus+ Solar Monitoring Station without Trackers

Eko Instruments

MS-90 Plus+

- Highest precision GHI measurements and lowest uncertainty with Class A pyranometer- DNI measurement with <5% uncertainty.- No solar tracker required- MODBUS 485 RTU digital output for DNI, GHI, DHI

View

SS1-STD3 SunScan Canopy Analysis System for Crops

SENSORS & PROBES

SS1-STD3 SunScan Canopy Analysis System for Crops

Delta T

SS1-STD3

€5,950.00

Measures incident and transmitted PAR in canopies Direct display of Leaf Area Index (LAI) Usable in cloudy and clear conditions Proven, research-grade canopy analyser Ideal for phenotyping applications

SENSORS & PROBES

SPT401.001/W INDUSTRIAL CONDUCTIVITY PROBES

SENSECA (Delta Ohm)

SPT401.001/W

Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.

View

SENSORS & PROBES

SPTKI10

SENSECA (Delta Ohm)

SPTKI10

Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.

View

SENSORS & PROBES

SPTKI12 Combined Industrial Conductivity and Temperature 4-wire Pt100 probe

SENSECA (Delta Ohm)

SPTKI12

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.

View

SENSORS & PROBES

SPTKI13 Combined industrial Conductivity and Temperature probe with 2 PT electrodes.

SENSECA (Delta Ohm)

SPTKI13

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.

View

SENSORS & PROBES

SPT86 4-electrode combined Conductivity & Temperature probe with Pt100 sensor.

SENSECA (Delta Ohm)

SPT86

- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.

View

SENSORS & PROBES

SPTKI11 Combined industrial conductivity and temperature probe in Rytron

SENSECA (Delta Ohm)

SPTKI11

€270.00

Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C.

SENSORS & PROBES

TP475A.O Air probe

SENSECA (Delta Ohm)

TP475A.O

View

SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC)

ACCESORIES

SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC)

SENSECA (Delta Ohm)

SPT10G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.

View

SPT1G Combined Conductivity and Temperature Probe

ACCESORIES

SPT1G Combined Conductivity and Temperature Probe

SENSECA (Delta Ohm)

SPT1G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1.

View

ACCESORIES

SPT01G Combined Conductivity and Temperature Probe

SENSECA (Delta Ohm)

SPT01G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1

View

SP06T Conductivity (5µS/cm to 200mS/cm) and Temperature combined probe (Cell constant 0.7)

ACCESORIES

SP06T Conductivity (5µS/cm to 200mS/cm) and Temperature combined probe (Cell constant 0.7)

SENSECA (Delta Ohm)

SP06T

- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.

View

SENSORS & PROBES

SFT Heat Flux Sensor for Soil

Nesa srl

SFT

€660.00

Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.

Transmitters & Transducers

DURTOX Toxic and Oxygen Detector with 4-20 mA output

DURAN

DURTOX

€500.00

DURTOX - IP65 plastic box4-20mA detectors by electrochemical technology for the detection of oxygen and the various toxic gases:CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2DURTOX-X - ATEX Explosion Proof Box (LOM 10ATEX2076 Certif.)Models for the following gases: CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2.

H721 VERIS AC TRANSDUCER (4-20mA output)

H721 VERIS AC TRANSDUCER (4-20mA output) 2

TRANSDUCERS

Hawkeye H721 AC Current Transducer (4-20mA output)

Veris

H721

Solid core transducer. (does not open to insert the cable).Selectable amperage range:H721LC: 0 - 10/20 / 40AH721HC: 0 - 50/100 / 200AAnalog output: 4-20 mA, powered by external @ 12-30VDC Minimum Order: 2 Units

View

FMU-2000P Portable Ultrasonic Flowmeter 2

SENSORS & PROBES

FMU-2000P Portable Ultrasonic Flowmeter (DN15mm to DN6000mm)

MRC

FMU-2000P

3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃

View

W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox

INSIDE & OUTSIDE USE

W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox

Comet System

W8810

€465.00

The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision

SENSORS & PROBES

PR2 SDI-12 - PR2 Profile Probe – SDI-12 version

Delta T

PR2 SDI-12

€1,530.00

SDI-12 compatibility allows integration into new and existing SDI-12 systems.The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. - Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable- Enables the creation of low cost highly flexible sensor networks- Compatible with existing PR2 access tubes and...

PL400R-N Heated Rain Gauge 400cm2 (Output signal: pulses)

SENSORS & PROBES

PL400R-N Heated Rain Gauge 400cm2 (Output signal: pulses)

Nesa srl

PL400R-N

€780.00

Available with heater for cold climatic condition (mod. PL400R) and with MCS module for signal normalization (0÷2Vdc, 4÷ 20mA, RS485/Modbus)

PL400R-A Heated Rain Gauge 400cm2 Collection Surface (Out signal: 0÷2Vdc)

SENSORS & PROBES

PL400R-A Heated Rain Gauge 400cm2 Collection Surface (Out signal: 0÷2Vdc)

Nesa srl

PL400R-A

€890.00

PL400-B 400cm² Rain gauge in accordance to WMO norms Class A

PL400-B 400cm² Rain gauge in accordance to WMO norms Class A 2

SENSORS & PROBES

PL400-B Rain Gauge 400 cm² Class A (Output: 4 ÷ 20mA)

Nesa srl

PL400-B

€795.00

Rain gauge in accordance to WMO norms Class A according to UNI 11452:2012.

LUX-B Luxmeter - connection to MCS module

LUX-B Luxmeter - connection to MCS module 2

SENSORS & PROBES

LUX-B Luxmeter 0 ÷ 200klux with 4-20mA Output

Nesa srl

LUX-B

€545.00

Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories).

AO-ZPS-SW2 Differential Pressure Switch, 0.4 to 1.40 Inches WC

SENSORS & PROBES

AO-ZPS-20 Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC

AO-Electronics

AO-ZPS-20

€349.00

Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC Static Pressure Tube Included & LCD Display - Field-selectable ranges and output signals - Five direct and five bidirectional standard ranges - 4-20 mA, 0-5 VDC, or 0-10 VDC output signal - Inches of water or Pascal engineering units - Optional large LCD display - Microprocessor...

AO-002 Flow-Through Accesory for O2 Sensor

SENSORS & PROBES

AO-002 Flow-Through Accesory for O2 Sensor

AO-Electronics

AO-002

€70.00

The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes.

SD-TEMP-P-06 Temperature sensor for pipes

SD-TEMP-P-06 Temperature sensor for pipes 2

SENSORS & PROBES

SD-TEMP Temperature sensor for pipes & walls

Onset

SD-TEMP

€88.00

Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

SENSORS & PROBES

SD-MA-420 HOBO Self-Describing 4-20 mA Input Cable Sensor

Onset

SD-MA-420

€49.00

Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure cable is connected and stays connected Measurement range of 0 to 20.1 mA Accuracy of ±0.001 mA ± 0.2.% of absolute current Cable length: 47 cm (18.5 in)

Conductivity in Soil

AO-520-02 Integrated Soil Moisture, Temperature & EC Sensor (0-2Vdc or RS485 or SDI-12...

AO-Electronics

AO-520-02

€189.00

AO-520-02 is an integrated soil moisture, temperature & electrical conductivity (EC) sensor. Optional model available for pH Range: 3-9 pH (consult)

SENSORS & PROBES

CERES Temp. Humidity & CE Soil Sensor (SDI-12 or RS485)

NAZARÍES IT

CERES

€437.50

Sensor of the soil temperature, soil moisture, the electrical conductivity of the soil, the complex dielectric permittivity of the soil and the electrical conductivity of the "water pores" contained in the soil hole.Both the conductivity of the soil and the water of the pores are automatically compensated by the temperature. Includes standard 5 meter cable

VG-SPRINKLER VegeSprinkler - WiFi Latching Sprinkler Valve Controller, controls up to 4 valves

VG-SPRINKLER VegeSprinkler - WiFi Latching Sprinkler Valve Controller, controls up to 4 valves 2

SENSORS & PROBES

VG-SPRINKLER VegeSprinkler - WiFi Latching Sprinkler Valve Controller (4 valves)

Vegetronix

VG-SPRINKLER

€299.00

WiFi Latching Sprinkler Controller

THERM200 Soil Temperature Sensor Probes (-40 °C to 85 °C)

SENSORS & PROBES

THERM200 Soil Temperature Sensor Probes (-40 °C to 85 °C)

Vegetronix

THERM200

€50.00

Soil Temperature Sensor Probe Applications Environmental monitoring. Weather stations. Ice detection systems. Irrigation and sprinkler systems. Temperature monitoring of bulk foods.

SENSORS & PROBES

SP-214-SS Amplified 4-20 Milliamp Pyranometer

Apogee Instruments

SP-214-SS

€430.00

The SP-214 is an amplified, analog sensor with a 4 to 20 mA output.The sensor incorporates a silicon-cell photodiode with a rugged, self-cleaning sensor housing design. BUYING IN BULK, OR JUST WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our More info about this product form

HTi Instruments

AO-HT-05 Type K thermocouple probe clamp (-40 to + 200ºC)

HTi

AO-HT-05

€15.00

K Type thermocouple Clamp for industrial temperature measurements

SMR04 Online Water Quality Analyzers (RS485)

SMR04 Online Water Quality Analyzers (RS485) 2

Oxígeno Disuelto DO

SMR09 Dissolved Oxygen Analyzer Sensor for Water Quality

Aquas Inc.

SMR09

The Dissolved Oxygen Analyzer Sensor is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.

View

SMR07 Probe Conductivity Analyzer for Water Quality

SENSORS & PROBES

SMR07 Probe Conductivity Analyzer for Water Quality

Aquas Inc.

SMR07

IP68 conductivity analyzer (including temperrature compensation) (0~500ms/cm), POM housing, RS485 communication(3m cable)+Built-in temperaturesensor (Pt 100)(0~85℃)

View

Showing 361-396 of 534 item(s)