Building Quality

1
…
7
8
9
…
15

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor 2

SENSORS & PROBES

SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

1.8m Self Describing Stainless Steel HOBO Temperature Sensor. Self-Describing technology for quick, easy setup Locking jack to ensure sensor is connected and stay connected Food-grade stainless-steel temperature probe Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6...

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable 2

SENSORS & PROBES

SD-VOLT-xx HOBO Self-Describing DC Voltage Input Cable

- Self-Describing technology for quick, easy setup- Locking jack to ensure cable is connected and stays connected- Measurement range: - 0 to 2.5 V (w / SD-VOLT-2.5) - 0 to 5 V (w / SD-VOLT-05) - 0 to 10 V (w / SD-VOLT-10) - 0 to 24 V (w / SD-VOLT-24)- Accuracy: - ± 0.1 mV ± 0.1% of reading (w / SD-VOLT-2.5) - ± 0.2 mV ± 0.3%...

TCR24 DATA ACQUISITION SYSTEM FOR SOIL THERMAL CONDUCTIVITY

TCR24 DATA ACQUISITION SYSTEM FOR SOIL THERMAL CONDUCTIVITY 2

INSIDE & OUTSIDE USE

TCR24 DATA ACQUISITION SYSTEM FOR SOIL THERMAL CONDUCTIVITY

Metodology: Ground thermal conductivityTCR24 is designed to measure soil heat transmission (soil tendency to transmit heat).This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. 2 years warranty.Measurement can be done on site...

View

DT2011B Single Channel Vibrating Wire Data Logger

DT2011B Single Channel Vibrating Wire Data Logger 2

INSIDE & OUTSIDE USE

DT2011B Single Channel Vibrating Wire Data Logger

RST Instruments

- Battery powered for remote sites. - Compatibility with all VW sensors – excluding those with auto resonant circuitry. - 4MB memory. - 100 year memory backup. - Option for radio antenna for incorporation into an RSTAR system or DT LINK. - 16 bit analog/digital converter. - Weather resistant NEMA 4X (IP66) enclosure. - 0.01µs vibrating...

View

HIT-5 WOOD MOISTURE METER

HIT-5 WOOD MOISTURE METER 2

WOOD MOISTURE

HIT-5 WOOD MOISTURE METER

WOOD MOISTURE METER Moisture meter HIT-5 replaces a previous model HIT-4. HIT-5 has an improved mechanical design making it even more robust and durable.

WOOD MOISTURE METER WRD-100

WOOD MOISTURE METER WRD-100 2

WOOD MOISTURE

WOOD MOISTURE METER WRD-100

Wood Moisture Meter

Wood Moisture Meter 2

WOOD MOISTURE

HIT-3 Wood Moisture Meter

Moisture meter for wood includes electrodes and carrying case

WOOD MOISTURE METER WRD-30

WOOD MOISTURE

WOOD MOISTURE METER XD-30

WOOD MOISTURE METER

AIS-1 Microbial Air Sampler

AIS-1 Microbial Air Sampler 2

AIR QUALITY

AIS-1 Microbial Air Sampler (Microbial Contamination Analyzer)

Widely used in pharmaceutical company, milk product plant, clinical operation room, fermentation industry et al, where microbial contamination needs to be strictly monitored and controlled. Also it is applicable in institutes that need study of the air microbial condition.

VW2100 Vibrating Wire Piezometer

VW2100 Vibrating Wire Piezometer 2

SENSORS & PROBES

Vibrating Wire Piezometer VW2100

RST Instruments

RST VW2100 Vibrating Wire Piezometer has been designed to be embedded in earth fills and concrete or inserted into boreholes and pipes as small as 19 mm (3/4 inch) in diameter. RST VW2100-DP Vibrating Wire Piezometer is designed to be driven into unconsolidated fine grain material such as sand, clay, or silt.

View

VW0420: Vibrating Wire Isolated Analog Interface

VW0420: Vibrating Wire Isolated Analog Interface 2

RST Instruments

VW0420 Isolated Analog Interface for Vibrating Wire Sensor (4-20mA output)

RST Instruments

◆ Maximum flexibility in connecting the system◆ 4 dielectrically isolated ground subsystem◆ Straightforward setup, easy to connect via USB cable

View

LI19 Hand-held read-out unit / datalogger

LI19 Hand-held read-out unit / datalogger 2

INSIDE & OUTSIDE USE

LI19 Hand-held read-out unit / datalogger

LI19 is a high accuracy handheld read-out unit / datalogger.It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life...

View

Showing 85-96 of 179 item(s)

1
…
7
8
9
…
15

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow