AP-2000 Advanced portable multi-parameter Aquaprobe

Customization Options:

The AP-2000 features 2 Auxiliary sockets to allow you to add further sensors to the probe.

The probe can be used with a variety of cable lengths via the AquaConn Connectors. Cables available in 3m (standard), 10m, 20m and 30m lengths.

Customisation Options

There are 3 simple choices to make to customise the probe.

The probe comes with 1 Ion Selective Electrode (ISE) socket and 1 optical electrode socket, plus an option to add a depth sensor!

Probes are supplied with blanking plugs in the ISE and optical electrode ports as standard. Simply unscrew these to add your extra electrodes.

Using the AP-2000-D as a water level logger

The AP-2000-D features a depth sensor. This sensor is capable of measurement accuracy of 0.5%FS.

This is very comparable to a dedicated water level logger such as the LeveLine-ECO: 0.2%FS, and the LeveLine (titanium): 0.1%FS.

The depth is zeroed automatically whilst the conductivity is reading zero. As soon as the conductivity registers over 0 the probe depth begins to be calculated.

Once the probe is lowered to the desired depth it must be secured, then using the GPS Aquameter the depth can be zeroed once again.

Now the AP-2000-D will detect small changes in the water level and display them as a positive or negative change.

AP-2000 Mechanical Specification

The bright red and blue LED’s of the optical DO sensor

The most important being that as no oxygen is consumed across a membrane, the sensor does not require a flow of liquid passing over it to achieve a stable reading. Other advantages include in frequent calibrations (every 3-6 months), and replaceable caps that last over 2 years.