LU06-C Hydrometer Ultrasonic Sensor ( range 0÷6m. Out:RS485/ModBus.)
LU06-C Hydrometer Ultrasonic Sensor ( range 0÷6m. Out:RS485/ModBus.)
LU06-C Hydrometer Ultrasonic Sensor ( range 0÷6m. Out:RS485/ModBus.)
LU06-C Hydrometer Ultrasonic Sensor ( range 0÷6m. Out:RS485/ModBus.)

LU06-C Hydrometer Ultrasonic Sensor ( range 0÷6m. Out:RS485/ModBus.)

Reference: LU06-C - Manufacturer: Nesa srl

Hydrometer Ultrasonic Sensor

€1,340.00
Tax excluded Envío: 1 a 3 semanas

 

Ultrasonic level sensor. Applications or as hydrometer or as snow gauge, suitable for outdoor use with high temperature and aggressive atmospheres such as sewers, silos, etc.. Aluminum structure anticorrodal IP65 with automatic temperature compensation. Conforms to WMO for environmental monitoring. Sensor is equipped with electrical protections and available with different signal outputs.

The sensor for hydrometric level measure or snow level, mod. LuxxNesa is made of a piezoelectric transducer IP67, housing inside a shield that protects the sensor from the direct solar radiation and from the wind blasts. Beside the transducer employed, supplies extremely precise measures, with an excellent repeatability, low hysteresis and stable behaviour with the temperature, that allows to employ the sensor as a hydrometer and a snow-meter.

• Ultrasonic sensor for measuring the water level/snow

• Conforms to standard WMO

• Aluminium body IP65 for outdoor applications

• Piezoelectric measuring system with automatic compensation for temperature

• Measuring range: 0÷6000mm (0÷10.000 mm on request)

• Resolution: 1mm

• Accuracy: 0.1% f.s.

• Reduced power consumption (<900mW in reading)

• Reading very fast (> 1s)

• Operating conditions: -25 ÷ +70°C even in corrosive atmosphere.

• Power supply: 10÷30Vdc

Available options for this sensor: (see also section Sensors Accessories ) - Wall arm or bridge (SS-P1) L = 1500mm with hinge for easy retrieval of the sensor during maintenance. - Hydrometric rod, vertical or inclined at 30°. Type of mounting: wall or slopes, complete with brackets and numbering.

The Sensor measures:
Water or Snow Level
Output Signal:
RS485

Viewed products

2061-250/0Temperature probe without connector, for soft or bulk solids, liquid and gaseous substances, -30°C to 250°C 2061-250/0Temperature probe without connector, for soft or bulk solids, liquid and gaseous substances, -30°C to 250°C 2
SENSORS & PROBES

2061-250/0 Temperature Probe without connector, for soft or bulk solids, liquid &...

Comet System
2061-250/0
€115.00
Temperature probes S 2061/250 are intended for temperature measurement of soft or bulk solids, liquid and gaseous substances. The temperature range for application of the probe is –30°C to +250°C and it must not be exceeded even for a short term.The probes may be used for all control systems compatible with the Pt 1000 temperature sensor with a...

16 other products in the same category:

Product added to wishlist
Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow