SENSORS & PROBES SPT86 4-electrode combined Conductivity & Temperature probe with Pt100 sensor. SENSECA (Delta Ohm) SPT86 - 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C. View
SENSORS & PROBES SPTKI11 Combined industrial conductivity and temperature probe in Rytron SENSECA (Delta Ohm) SPTKI11 Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C. DISCONTINUED. View
CHLOROPHYLL CONCENTRATION 2950S Software (for FieldScout CM1000 Chlorophyll Meter) Spectrum Technologies 2950S €290.00 CM 1000 Software required for to activate the data logger Add to cart
Colorimeters TCM500 NDVI FieldScout Turf Color Meter Spectrum Technologies TCM500 NDVI €1,195.00 Reflectance of red light (660 nm) and NIR (850 nm) to measure the turf canopy and the Normalized Difference Vegetation Index (NDVI). Ref.: 2975NDVI Add to cart
ACCESORIES SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC) SENSECA (Delta Ohm) SPT10G Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10. View
ACCESORIES SPT1G Combined Conductivity and Temperature Probe SENSECA (Delta Ohm) SPT1G Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1. View
ACCESORIES SPT01G Combined Conductivity and Temperature Probe SENSECA (Delta Ohm) SPT01G Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1 View
ACCESORIES SP06T Conductivity (5µS/cm to 200mS/cm) and Temperature combined probe (Cell constant 0.7) SENSECA (Delta Ohm) SP06T - Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar. View
MULTIFUNCTION M1322 MultiLogger Meter Thermo-hygro-CO2 with 2 MiniDIN and 2 Terminals Comet System M1322 €909.00 Add to cart
SENSORS & PROBES SFT Heat Flux Sensor for Soil Hukseflux SFT €660.00 Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol. Add to cart
SENSORS & PROBES FMU-2000P Portable Ultrasonic Flowmeter (DN15mm to DN6000mm) MRC FMU-2000P 3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃ View
INSIDE & OUTSIDE USE W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox Comet System W8810 €465.00 The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision Add to cart
Air quality S-SO2 European Gas Sensor for measurement of SO2 Sulfur dioxide (100ppm) Nesa srl S-SO2 €1,650.00 S-SO2 " Add to cart
SENSORS & PROBES FS5021 Transmitter for Air Flow and Volume Flow + Temperature for Air Conducts (output... Fuehler Systeme FS5021 €270.00 - 0-20 m/s, 0...+50°C, 0-200.000 m³/h - 0-10 V, 4-20 mA - LCD display, relay - 5 scales per device Add to cart
SENSORS & PROBES FS4083 Multisensor for CO2, VOC, Temperature and Humidity (0-10V) for Indoor Use. Fuehler Systeme FS4083 €532.00 0-2000/5000/10000 ppm mixed gas VOC temperature, humidity 0-10 V, relay LCD-Display Add to cart
SENSORS & PROBES FS1308 Transmitter particulate matter/particles PM2.5/PM10, digital output Modbus Fuehler Systeme FS1308 €537.00 0 μg/m³ ... 1000 μg/m³ Modbus LCD-Display Add to cart
SENSORS & PROBES PR2 SDI-12 - PR2 Profile Probe – SDI-12 version Delta T PR2 SDI-12 €1,580.00 SDI-12 compatibility allows integration into new and existing SDI-12 systems.The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. - Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable- Enables the creation of low cost highly flexible sensor networks- Compatible with existing PR2 access tubes and... Add to cart
SENSORS & PROBES ST20 Perimeter Bands for Perimeter Dendrometers EMS Brno ST20 €70.00 Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field. Add to cart
SENSORS & PROBES LUX-B Luxmeter 0 ÷ 200klux with 4-20mA Output Nesa srl LUX-B €545.00 Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories). Add to cart
CHLOROPHYLL CONCENTRATION FP 110 FluorPen Portable PAM Fluorometer PSI FP 110 €2,900.00 FluorPen FP 110 is a portable, battery-powered PAM fluorometer that enables quick and precise measurement of chlorophyll fluorescence parameters in the laboratory, greenhouse, or in the field. It can be effectively used for studying photosynthetic activity, stress detection, herbicide testing, or mutant screening. Affordable price and straight-forward... Add to cart
SENSORS & PROBES AO-RL/A Room air quality sensor for mixed gas (VOC) AO-Electronics AO-RL/A €235.00 - 0...100% mixed gas VOC- 0-10 V, 4-20 mA, changer- automatic re-calibration View
LIGHT SENSORS & ACCESSORIES KS-2500 Suspension Cuvette WALZ WALZ KS-2500 The suspension cuvette includes a 400 μL stainless steel sample compartment with a PVC exterior. View
SENSORS & PROBES MQ-210X Underwater Quantum Meter Apogee Instruments MQ-210X €515.00 The MQ-210X quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor... Add to cart