Temperature

1
…
25
26
27
…
40

HH2 Hand Held Moisture Meter

HH2 Hand Held Moisture Meter 2

ENVIRONMENTAL PRODUCTS

HH2 Hand Held Moisture Meter

HH2 Hand Held Moisture Meter (sensor not included) Immediate display of water content Reads ML3, SM150T, PR2 (analogue and SDI-12) or WET sensor Stores up to 1500 time-stamped readings

Soil Humidity Sensor for Water content, Electrical Conductivity & Temperature

Soil Humidity Sensor for Water content, Electrical Conductivity & Temperature 2

ENVIRONMENTAL PRODUCTS

WET-2 Soil Humidity Sensor - (Water content, Electrical Conductivity & Temperature...

Wet Sensor WET-2 for soil humidity - (Water content, EC and Temperature). Includes 1m cable fitted with 25-way D socket, suitable for connection to HH2.

WET Sensor - Measures Moisture, EC and Temperature

WET Sensor - Measures Moisture, EC and Temperature 2

TEMPERATURE & HUMIDITY

WET-2-K WET KIT for Water Content, CE and Temperature

- Measures Water content, EC and Temperature- Complete kit with readout unit & case Sensors are normally ordered as a complete kit that includes a WET Sensor, an HH2 Moisture Meter and a handy carry case. There are three types of Kit – each with a different set of substrate calibrations, including coir, peat and mineral wool. Please see below for...

LEVELINE-BARO Water Level and Temperature Logger

LEVELINE-BARO Water Level and Temperature Logger 2

WATER (TEMP, LEVEL & QUALITY)

LEVELINE-BARO Water Level and Temperature Logger

The LeveLine collects water level data at user-defined intervals and stores the information in its internal memory. The logger can take up to an impressive 10 readings per second and the huge internal memory is capable of storing up to 500,000 readings. Made from titanium, the LeveLine is built for deployment in all kinds of water from fresh groundwater...

View

ECONOMIC DATA LOGGER

ECONOMIC DATA LOGGER 2

INSIDE & OUTSIDE USE

S3120E Economy Thermometer (-30 to +70°C) (0 to 100%)

Thermo-hygrometerEconomic data logger is designed for recording the temperature and humidity. The values are stored in a non-volatile electronic memory. The transfer of data to the personal computer for further analysis is done through USB, RS232, GSM or Ethernet through a suitable communication adapter (optional).

AQC11 - Soil Humidity and Temperature Probe

AQC11 - Soil Humidity and Temperature Probe 2

Soil Moisture

SDI-12 Portable Soil Humidity and Temperature Probe AquaCheck AQC11

SDI-12 Sub-Surface Probe with cable. The probes are available in sizes from 200 to 1600 mm and with from 2 to 15 sensors along the probe body. The AQC11 model is designed for permanent installation on the ground.

AQC10 - Portable Soil Humidity and Temperature Probe

AQC10 - Portable Soil Humidity and Temperature Probe 2

Soil Moisture

SDI-12 Portable Soil Humidity and Temperature Probe AquaCheck AQC10

AquaCheck AQC10

Classic Sensor designed for mobile or semi-permanent installations and has from 2 to 15 sensors distributed along the body of the probe. The AQC10 model has a handle so that it can be easily removed to take measurements at different points.

AO-330-01 with AO-95-01 Protector (included)

AO-330-01 with AO-95-01 Protector (included) 2

SENSORS & PROBES

AO-330-01 Ambient Temperature Humidity & Pressure Sensor (with sunscreen), outputs...

4 Models to choose from (Solar Shield included):AO-330-01A Temperature, Relative Humidity.AO-330-01B Temperature, Relative Humidity, Pressure.AO-330-01C Temperature.AO-330-01D Relative Humidity.

Tempmate.®-i1 Single-use TEMPERATURE INDICATOR EN12830 compliant

Tempmate.®-i1 Single-use TEMPERATURE INDICATOR EN12830 compliant 2

INSIDE & OUTSIDE USE

Tempmate.®-i1 Single-use temperature indicator compliant with EN12830 (40 unit pack)

tempmate.®-i1 temperature indicators have been specially developed for monitoring pharmaceutical products’ cold chain. As a pre-programmed device, the tempmate.®-i1 can be immediately deployed for monitoring temperature-sensitive goods and freight. In contrast to chemical indicators, this electronic indicator’s 3 LEDs provide simple and clear feedback on...

S300 (12VDC) Low Voltage Air Velocity & Temperature Switch

S300 (12VDC) Low Voltage Air Velocity & Temperature Switch 2

SENSORS & PROBES

S300 (12VDC) Low Voltage Air Velocity & Temperature with Switch

D = Direction:1 = Non-Directional2 = DirectionalL = Length:1 = 152mm [6.0”] max insertion depth = 110 mm [4.3”]2 = 211mm [8.3”] max insertion depth = 169 mm [6.7”]3 = 287mm [11.3”] max insertion depth = 245 mm [9.6”]

View

Multi-Sensor-Platform FS1600

Multi-Sensor-Platform FS1600 2

INSIDE & OUTSIDE USE

AO-FS1600 Multi-Sensor-Platform - Modbus RTU

Fuehler Systeme

- Up to 8 measured variables in one device - Choice of 16 sensors - Modbus RTU - high quality case and stainless steel tapsThis multi-sensor measuring device can be modularly composed of the following measured variables: temperature, humidity (also heated), air pressure, differential pressure, air quality (CO, CO2, VOC, O2, particle), flow, brightness and...

AO-WDC6SE Mini Weather Station

AO-WDC6SE Mini Weather Station 2

COMPACT STATIONS & KITS

AO-WDS6SE Professional Ultrasonic Weather Station

Robust design, the WDS6E is easy to install for continuous 24-hour monitoring.Maintenance-free operation: With no moving parts, the entire system is designed to be maintenance-free, ensuring long-term reliability.Advanced communication: MODBUS protocol with standard RS485/RS232 output.Optional upgrades: Capable of integrating additional modules such as an...

Showing 301-312 of 469 item(s)

1
…
25
26
27
…
40

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow