WEATHER STATIONS

MWDG-GSM-B Wireless Datalogger Gateway for collection, storage and export data

MWDG-GSM-B Wireless Datalogger Gateway for collection, storage and export data 2

WEATHER S. ACCESSORIES

MWDG-GSM-B Wireless Datalogger Gateway for collection, storage and export data (RS485,...

Modular Wireless Datalogger Gateway - Data gathering, storage and export gateway- Manages up to 50 wireless probes/dataloggers storing up to 2,500,000 samples- Equipped with external WSN and GSM antennas- Provided with RS485 with MODBUS RTU protocol and internal GSM module for point-to-point connections and GPRS for connection to the www.winecap.it...

View

SENSORS & PROBES

TC6-T T type Thermocouple (-200°C to 180°C)

Onset

TC6-T

€32.00

At AlphaOmega-Electronics you will find the best range of Thermocouple sensor and at the most competitive prices.

Wireless MWDG-ETH-B Datalogger Gateway - Data gathering, storage and export gateway.

WEATHER S. ACCESSORIES

Wireless MWDG-ETH-B Datalogger Gateway - Data gathering, storage and export gateway.

Capetti Elettronica s.r.l.

MWDG-ETH-B

Modular Wireless Datalogger Gateway- Data gathering, storage and export basestation- Manages up to 50 wireless probes/dataloggers storing up to 2,500,000 samples- Equipped with external WSN antenna- Provided with RS485 with MODBUS RTU protocol and LAN port for www.winecap.it Service Center connection and for remote reading using RTU ModBus over TCP....

View

HD 2013UA Option of contact plus analog output for HD 2013 rain gauge

Delta Ohm (Senseca)

HD 2013UA Option of contact plus analog output for HD 2013 rain gauge

SENSECA (Delta Ohm)

HD2013UA

HD2013UA Option for the HD2013 rain gauge with contact output and analog output to choose between 4 ... 20 mA or 0 ... 10 Vd c.Ext. Power Supply:7 ... 30 Vdc for the 4 ... 20 mA output13 ... 30 Vdc for output 0 ... 10 Vdc.

View

WSD15TIIDRO Fixing and micrometric adjustment kit (±2°) for biaxial horizontal clinometers

WSD15TIIDRO Fixing and micrometric adjustment kit (±2°) for biaxial horizontal clinometers 2

WEATHER S. ACCESSORIES

FIX-WSD15O Fixing and micrometric adjustment kit (±2°) for biaxial horizontal clinometers

Capetti Elettronica s.r.l.

FIX-WSD15O

View

Delta Ohm (Senseca)

HD2013 – Tipping Bucket Rain Gauge

SENSECA (Delta Ohm)

HD2013

Tipping bucket rain gauge, area 400 cm2, for temperatures from +4 °C to +60 °C; resolution on request when ordering 0.1 – 0.2 or 0.5 mm. Output contact normally closed. Rain gauge with tipping bucket, area 400cm2, for temperature range -20°C (heated version)... +70°C.

View

WEATHER S. ACCESSORIES

MX2300-RS-BRACKET Bracket for HOBO MX2300 Data Loggers

Onset

MX2300-RS-BRACKET

€13.90

This bracket is required for mounting HOBO MX2301 and MX2305 loggers in either an RS1 or M-RSA solar radiation shield.

AO-KLT/A Air Duct quality sensor for mixed gas (VOC) and temperature

SENSORS & PROBES

AO-KLT/A Duct Air quality sensor for mixed gas (VOC) and temperature

Fuehler Systeme

AO-KLT/A

€335.00

0...100% mixed gas VOC Output Type : 0-10 V or 4-20 mA automatic re-calibration

View

WEATHER S. ACCESSORIES

U23-RS-CLAMPKIT

Onset

U23-RS-CLAMPKIT

€9.90

This clamp allows the U23-001 or U23-004 to be mounted in the M-RSA radiation shields.It is NOT required for use with other HOBO Pro v2 models.

AO-KLT/A Air Duct quality sensor for mixed gas (VOC) and temperature 2

SENSORS & PROBES

AO-KL/A Air Duct Quality Sensor for mixed gas (VOC) for conducts

Fuehler Systeme

AO-KL/A

€315.00

0...100% mixed gas VOC 0-10 V or 4-20 mA automatic re-calibration

View

HD 2013UD Rain Gauge with Digital Output (SDI-12)

HD 2013UD Rain Gauge with Digital Output (SDI-12) 2

Delta Ohm (Senseca)

Rain Gauge with Digital Output SDI-12 (HD2013UD Option)

SENSECA (Delta Ohm)

HD2013UD

Factory option (for HD2013 rain gauge) with contact output and SDI-12 digital output.Power supply 7 ... 30 Vdc.

View

SRH1A Humidity and Temperature Sensor SDI12

SRH1A Humidity and Temperature Sensor SDI12 2

SENSORS & PROBES

SRH1A Humidity and Temperature Sensor with SDI-12

PM Ecology

SRH1A

€269.00

The SRH1A Humidity and Temperature Sensor is a highly accurate and cost effective probe with robust POM-C enclosure. It has been prepared for outdoor and indoor environments. Can be used with Wind2measure RADIO Data Logger or integrated with other manufacturers’ equipment.

AO-95-01 Rain and Anti-UV Protector with support (sensor not included)

AO-95-01 Rain and Anti-UV Protector with support (sensor not included) 2

SENSORS & PROBES

AO-95-01 Rain & Anti-UV shelter for AO-330-01

AO-Electronics

AO-95-01

11-shade protector for solar radiation (anti-UV) and rain.The AO-95-01 Solar Radiation Shield includes: radiation shield, bracket and U-bolt.Includes anchors for mast or wall. Sensor not included.

View

WET Sensor - Measures Moisture, EC and Temperature

WET Sensor - Measures Moisture, EC and Temperature 2

TEMPERATURE & HUMIDITY

WET-2-K WET KIT for Water Content, CE and Temperature

Delta T

WET-2-K

€2,050.00

- Measures Water content, EC and Temperature- Complete kit with readout unit & case Sensors are normally ordered as a complete kit that includes a WET Sensor, an HH2 Moisture Meter and a handy carry case. There are three types of Kit – each with a different set of substrate calibrations, including coir, peat and mineral wool. Please see below for...

AL-120 Solar Mounting Bracket with Leveling Plate

SENSORS & PROBES

AL-120 Solar Mounting Bracket with Leveling Plate

Apogee Instruments

AL-120

€130.00

The AL-120 solar mounting bracket with a leveling plate is specifically engineered for the secure installation of Apogee Instruments' range of sensors, including pyranometers, pyrgeometers, quantum sensors, red–far-red sensors, PAR-FAR sensors, and ultraviolet sensors.

SENSORS & PROBES

BF5 Solar & PAR Light Radiation Sensor

Delta T

BF5

€2,580.00

Measures global and diffuse radiation Sunshine duration No moving parts, no shade rings PAR reference sensor for SunScan System Outputs can be PAR (mmol.m-2.s-1), Energy (W.m-2) or Lux See “How Greenwich University Is Rethinking Solar Panels for Greenhouses using the BF5 - Delta-T Case Study”.

SENSORS & PROBES

Probes-OQ610 Combination Temperature Probes for Oven OQ610

Grant Instruments

Probes-OQ610

€195.00

Combined Probes:◆ 3 Cable Lengths of each Model.◆ Can be used as a Magnetic Air Probe, Magnetic Surface Probe, Clamp Air Probe or Clamp Surface Probe.

3679WD1 Transportador de datos WatchDog serie 1000/2000

3679WD1 Transportador de datos WatchDog serie 1000/2000 2

Spectrum Technologie

3679WD1 WatchDog 1000/2000 Series Data Transporter

Spectrum Technologies

3679WD1

€425.00

Transport your weather data and bring back to your host PC. Use with Software Spec 9 to offload to your desktop PC.

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC)

SENSORS & PROBES

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC)

Grant Instruments

CAP-K-G

€195.00

CLAMP AIR PROBE Grant manufactures a comprehensive range of robust, high quality temperature probes with a choice of sensor and in a variety of physical styles for use with Squirrel data loggers. In addition to the standard range of temperature probes Grant is able to customise probes for special applications. Grant is able to supply humidity probes and...

ODOS-5005 Replacement Optical Sensor Cap

ODOS-5005 Replacement Optical Sensor Cap 2

SENSORS & PROBES

Replacement Optical Sensor Cap ODOS-5005

IKS-INDUSTRIAL

ODOS-5005

Replacement cover for the ODOS-5000 sensor. The only part that can suffer wear - the sensor cap is robust and simply interchangeable with 24 months warranty.

View

MSP-K-G Magnetic Surface Temperature Sensor Probe (up to 250ºC)

SENSORS & PROBES

MSP-K-G Magnetic Surface Temperature Sensor Probe (up to 250ºC)

Grant Instruments

MSP-K-G

€195.00

MAGNETIC SURFACE PROBE -GRANT INSTRUMENTS Grant manufactures a comprehensive range of robust, high quality temperature probes with a choice of sensor and in a variety of physical styles for use with Squirrel data loggers. In addition to the standard range of temperature probes Grant is able to customise probes for special applications. Grant is able to...

AO-150-01 Wind Speed Display Controller 2

SENSORS & PROBES

AO-150-01 Wind Speed Controller with Display (Cabled and Wireless version)

AO-Electronics

AO-150-01

€260.00

The AO-150-01 wind speed display controller gives a visual indication of real-time wind speed, with a LED digital display.AO-150-01 is the companion to our AO-100-01 Wind Speed Sensor Anemometer (Anemometer Not Included. View/choose models).

SENSORS & PROBES

ODOS-1674 Measuring Cell with 1 "Internal Thread Connection

IKS-INDUSTRIAL

ODOS-1674

For mounting into a probe holder the sensor can be deliveredoptionally with a 1” process connector.

View

Air Speed

AO-100-01 Wind Speed Sensor (Anemometer) with 1.5m cable

AO-Electronics

AO-100-01

€185.00

The AO-100-01 Metal Body Wind Speed Sensor is specifically designed to accurately and reliably measure wind speed in harsh environmental conditions.See Optional Controller / Display AO-150-01

Showing 313-336 of 534 item(s)