Electrodes 0040-10D LAQUA Electrode pH ISFET (Ion Sensitive Field Effect Transistor) HORIBA 0040-10D (3200367925) DISCONTINUED The Ion Sensitive Field Effect Transistor (ISFET) pH electrode has a semiconductor based sensor located less than 100 µm from the flat surface of the tip. View
Electrodes 0040-10D LAQUA pH Electrode tip ISFET HORIBA 0040-10D (3200367926) DISCONTINUED ISFET Replacement Tip for 0040-10D ISFET pH electrode View
Electrodes 1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell) HORIBA 1066A-10C (3014080432) Very durable minimum alkali errors. Most widely used for general pH measurements. View
Electrodes 1076A-10C LAQUA Electrode for pH Glass Body (Measurement of Low Conductivity Water and... HORIBA 1076A-10C (3014093084) Uses a glass membrane highly sensitive to lowconductivity water and nonaqueous solvents. Can also be used for ordinary pH measurement. View
Electrodes 2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode) HORIBA 2060A-10T (3014080434) Suitable for a wide range of pH measurements since the resistance of the liquid junciton is small View
Electrodes 2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double... HORIBA 2565A-10T (3014080436) Suitable for measurements of liquid other than normal aqueous solutions, such as suspensions, emulsions, paste, and non-aqueous solutions. When the potassium chloride solution of the internal solution reacts with the sample, measurements can be stably carried out by filling the sample or any other chloride solution in the external jacket. The replacement... View
SENSORS & PROBES 3200705774 Ammonia Electrode Membrane Caps for LAQUA HORIBA 3200705774 €264.00 Add to cart
Electrodes 3551-10D LAQUA Conductivity Electrode (Submersible Type / Low Water Conductivity)... HORIBA 3551-10D (3014081712) €585.00 Conductivity Electrode (with 1m cable, BNC and phono jack) Add to cart
Electrodes 3552-10D LAQUA Conductivity Electrode (Submersible / General Use Type) Conductivity Cell HORIBA 3552-10D (3014081545) Conductivity Electrode (with 1m cable, BNC and phono jack) View
Electrodes 3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water)... HORIBA 3553-10D (3014081714) Conductivity Electrode (with 1m cable, BNC and phono jack) View
Electrodes 3561-10D LAQUA Conductivity Electrode (Flow Type / Low Conductivity Samples)... HORIBA 3561-10D (3014082350) Conductivity Electrode (with 1m cable, BNC and phono jack) View
Electrodes 3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use)... HORIBA 3562-10D (3014082513) Conductivity Electrode (with 1m cable, BNC and phono jack) View
Electrodes 3573-10C LAQUA Conductivity Electrode with Crystal Body (For High Conductivity Water)... HORIBA 3573-10C (3014082590) Conductivity Electrode (with 1m cable, BNC and phono jack) View
Electrodes 3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) /... HORIBA 3574-10C (3014082592) Conductivity Electrode (with 1m cable, BNC and phono jack) View
Electrodes 4163-10T LAQUA pH Electrode (Temperature Compensation Electrode) HORIBA 4163-10T (3014080375) Used to automatically compensate the changes in the electromotive force of the pH electrode due to temperatures and also to measure temperatures. View
Electrodes 5002S-10C LAQUA Ammonia Electrode (NH3) (Combination) HORIBA 5002S-10C (3200698386) €895.00 Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each. Add to cart
514-04 pH 4 Calibration Solutions (pH 4.01 at 25 ° C) LAQUA Twin HORIBA 514-04 (3999960108) €54.00 pH 4.01 buffer solution, 6 x14 ml Add to cart
514-05 Salt Calibration Solutions 0.5% LAQUA Twin HORIBA 514-05 (3999960112) €54.00 NaCl Standard solution 0.5%, 6 x 14 ml Add to cart
SENSORS & PROBES 514-20 Conditioning Solution (For Conductivity & Salt Sensors) LAQUA Twin (6X14ml) HORIBA 514-20 (3999960114) €55.00 Conductivity/Salinity conditioning solution 6 x 14 ml Add to cart
514-22 Conductivity Calibration Solutions a 1413 μS / cm LAQUA Twin HORIBA 514-22 (3999960110) €54.00 Conductivity Standard 1413 uS/cm, 6 x 14 ml Add to cart
514-23 Conductivity Calibration Solutions a 12.9 mS/cm LAQUA Twin HORIBA 514-23 (3999960111) €54.00 Conductivity Standard 12.9 mS/cm, 6 x 14 ml Add to cart
514-50 Salt Calibration Solutions 5.0% LAQUA Twin HORIBA 514-50 (3999960113) €54.00 NaCl Standard solution 5.0%, 6 x 14 ml Add to cart
514-7 pH 7 Calibration Solutions (pH 6.86 a 25°C) LAQUA Twin HORIBA 514-7 (3999960109) €54.00 pH 7.00 buffer solution, 6 x 14 ml Add to cart
Laboratory, Pharmacy, Vaccine, Transport & Storage 514‐686 pH 6.86 buffer solution 6 x 14 ml HORIBA 514‐686 (3200691954) €54.00 Add to cart
Electrodes 6069-10C LAQUA pH Electrode Combined Rechargeable Tube Glass Body (Very Thin Test Tubes) HORIBA 6069-10C (3014081107) This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body. - Electrode: 291mm length, 3mm diameter- Waterproof View
Electrodes 6252-10D LAQUA pH 3-1 Electrode With Needle Tip Temp Sensor and Glass Body (for Food... HORIBA 6252-10D (3014080850) The needle tip of this glass-body, refillable pH electrode with temperature sensor allows measurement of food samples and aqueous solutions. View
Electrodes 6261-10C LAQUA pH Electrode Combined Flat Surface with Glass Body (for Flat Surface... HORIBA 6261-10C (3014081807) The liquid junction of this glass-body, refillable pH electrode is located on the flat pH sensing membrane. Perfect for measuring samples in shallow containers (e.g., petri dishes) and gelatinous samples (e.g., nutrient agar). For pH measurement of meat, skin, leather, paper, leaves and cloth. View
Electrodes 6367-10D LAQUA pH 3 in 1 Electrode Standard with Sleeve Glass Body (for High Accuracy... HORIBA 6367-10D (3014079136) This glass-body, refillable pH electrode 6367-10D with temperature sensor has a sleeve junction for improved stability and repeatability. Ideal for highly accurate pH measurement View
Electrodes 6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and... HORIBA 6377-10D (3014093085) The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents. View
Electrodes 6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S) HORIBA 6560S-10C (3200697407) Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each. View
Electrodes 6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S) HORIBA 6561S-10C (3200693774) Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each. View
Electrodes 6581S-10C LAQUA Nitrate Electrode (NO3-) ISE Included with 2 Electrode Tips (7681S) HORIBA 6581S-10C (3200697408) Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each. View
Electrodes 6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S) HORIBA 6582S-10C (3200697409) Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each. View
Electrodes 6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S) HORIBA 6583S-10C (3200697410) Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each. View