Building Quality

1
…
8
9
10
…
16

AIS-1 Microbial Air Sampler

AIS-1 Microbial Air Sampler 2

AIR QUALITY

AIS-1 Microbial Air Sampler (Microbial Contamination Analyzer)

Widely used in pharmaceutical company, milk product plant, clinical operation room, fermentation industry et al, where microbial contamination needs to be strictly monitored and controlled. Also it is applicable in institutes that need study of the air microbial condition.

VW2100 Vibrating Wire Piezometer

VW2100 Vibrating Wire Piezometer 2

SENSORS & PROBES

Vibrating Wire Piezometer VW2100

RST Instruments

RST VW2100 Vibrating Wire Piezometer has been designed to be embedded in earth fills and concrete or inserted into boreholes and pipes as small as 19 mm (3/4 inch) in diameter. RST VW2100-DP Vibrating Wire Piezometer is designed to be driven into unconsolidated fine grain material such as sand, clay, or silt.

View

VW0420: Vibrating Wire Isolated Analog Interface

VW0420: Vibrating Wire Isolated Analog Interface 2

RST Instruments

VW0420 Isolated Analog Interface for Vibrating Wire Sensor (4-20mA output)

RST Instruments

◆ Maximum flexibility in connecting the system◆ 4 dielectrically isolated ground subsystem◆ Straightforward setup, easy to connect via USB cable

View

LI19 Hand-held read-out unit / datalogger

LI19 Hand-held read-out unit / datalogger 2

INSIDE & OUTSIDE USE

LI19 Hand-held read-out unit / datalogger

LI19 is a high accuracy handheld read-out unit / datalogger.It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life...

View

HF03-LI19 heat flux sensor commonly used in fire testing

HF03-LI19 heat flux sensor commonly used in fire testing 2

INSIDE & OUTSIDE USE

Portable heat flux sensor, with read-out unit / datalogger (HF03-LI19)

HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger.The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare radiation monitors and flare heat flux sensors.

View

MX2304 Data Logger HOBO

MX2304 Data Logger HOBO 2

Environment

MX2304 HOBO External Temperature Sensor Data Logger

HOBO MX2304 weatherproof data logger with 1 external Temperature probe and data transfer via Bluetooth via a mobile device (smartphone or tablet).

300860 ROBIN Radon Sensor - Extended Protection Version for Mining Use

300860 ROBIN Radon Sensor - Extended Protection Version for Mining Use 2

Air Quality Monitoring

Robin-300860 Radon Sensor - mining version (0-400 or 0-4000 Bq/m3) & 1-10Vdc output

Radon is a natural radioactive gas that comes from the soil.Radon comes from the Uranium present in the rocks.High and dangerous levels of Radon accumulate in buildings.In Spain, radon generates 2000 cases of lung cancer each year. ► ROBIN radon sensor (Mining version with special anti-dust cover) of the Gammadata Instrument.► Measures radon gas in the...

U3430 Data Logger with built-in temperature, humidity and CO2 sensors.

U3430 Data Logger with built-in temperature, humidity and CO2 sensors. 2

CO2 Carbon Dioxide

U3430 Data Logger with built-in temperature, relative humidity and CO2 sensors.

Datalogger is designed to record temperature, humidity and CO2. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.

ABH-4224 Cup Anemometer Barometer/Humidity Temperature

ANEMOMETER

Cup Anemometer Barometer/Humidity Temperature ABH-4224

PTM-3010 input module

PTM-3010 input module 2

INSIDE & OUTSIDE USE

Input module PTM-3010 for TandD TR-55i-Pt / RTR-505-Pt Loggers

Gloss Meter Tri-angle HG268

Gloss Meter Tri-angle HG268 2

COLORIMETERS/GLOSS METERS

HG268 Gloss Meter Tri-angle with 20/60/85 degrees

HG268 Tri-angle Gloss Meter 20, 60 and 85° HG268 gloss meter is widely used to test glossiness in these industries, such as automobile, paint, ink, stoving varnish, coating, wood products; marble, granite, vitrified polished tile, pottery brick and porcelain; plastic, paper; hardware industries, etc.

Wall mount bracket for tempmate-M1 (tempmate-M1-200001)

Wall mount bracket for tempmate-M1 (tempmate-M1-200001) 2

SENSORS & PROBES

Wall mount bracket for tempmate-M1 (tempmate-M1-200001)

tempmate-M1-200001

Showing 97-108 of 185 item(s)

1
…
8
9
10
…
16

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow