Weather Station Kit ST.BASE

Basic weather station for monitoring standards meteo parameters with (6) sensors in accordance to WMO: temperature and humidity, rain, pressure, wind speed and direction. Datalogger TMF100, power supply system by solar panel 20W (TMF-ALPS) and pole support in anodized aluminum h = 2m. (On request also available with 220Vac primary power supply and/or with heated sensors). Option data transmission via GPRS/satellite/cable.

Composition of Station: UTA-N, N-PL400, BAR-A, VV1-N, N-DV, TMF100, M2CH, TMF-ALPS, PAL2A, 4xCS05

UTA-N Sensor de Temperatura y Humedad Combinados (Out: Pt100 1/3DIN)

• • Accurate and reliable Air Humidity & Temperature Sensor
• • Measure with RTD Pt100 and capacity
• • According to WMO standards
• • Anticorodal Aluminum body with size and weight compact
• • Available with forced ventilation (model UTAV)
• • Range: -40 ÷ +60°C (-60°C ÷ +70°C on request) [0 ÷ 100%Rh]
• • Resolution: 0.01°C, [0.05%]
• • Accuracy: DIN 43760 1/3DIN (±0,1°C), [± 2% f.s.]
• • Response time: <8s
• • Operating conditions: : -50 ÷ +80°C (-60 ÷ +80°C on request)
• • Output signal: N: 0÷1Vdc(Rh) 
• • Power supply: 10÷30Vdc (consumption with forced ventilation 2W max@12Vdc)

PL400-N Pluviómetro con 400cm2 de Superficie de Recogida (Out signal: pulses)

• • Sensor for measurement of precipitation with a knife blade support for tilting bucket
• • Class A accuracy according to UNI11552:2012
• • According to WMO, surface collection: 400cm2
• • Aluminium body white painted, sturdy and compact, stainless steel tilting bucket
• • Measuring range: 0÷300mm/h
• • Sensitivity: 0.2 mm (bucket capacity), 0.1mm on request
• • Instrumental constant: 0.2mm/pulse
• • Average accuracy ± 2% (± 0.10mm/min) (± 1% on request)
• • Operating conditions: 0 ÷ 80°C (-40 ÷ +80°C heated version)
• • Power supply: 10÷30Vdc (24Vac 30W heated version)

BAR-A Sensor de Presión Atmosférica (Out: 0 ÷ 2Vdc)

• • Sensor for measurement of atmospheric pressure with high precision
• • Small dimensions and weight with IP65 protection
• • Conforms to WMO's standard
• • Measuring range: 800 ÷ 1.100 hPa
• • Resolution: 0.05 hPa
• • Accuracy: 0.4 hPa
• • Low power consumption (<0.1 W)
• • Output signal: 0÷2Vdc
• • Operating conditions: -40 ÷ +80°C
• • Power supply: 10÷30Vdc

VV1-N Anemómetro de Precisión (Out: frequency pulses)

• • Measurement of wind speed with very high precision (<0.1 m/s)
• • Calibrations: wind tunnels MeasNet and ACCREDIA
• • Classification according to IEC 61400-12-1 and 'First Class' , Class A 1.96, Class B 3.05 Class S 2:42
• • Instrument according to standard WMO
• • Rotor with high performance ball bearing (MIL-L-6085 C)
• • Low power consumption (<0.1W; <5W@12VDC with heater)
• • Typical measuring range: 0.28 to 50m/s (0 ...150 Hz) up to 100m/s
• • Linearity: R> 0.99998 with a standard error of <0.02 m/s
• • Operating conditions: -10 ÷ +70° C, heated version -35 ÷ +70°C, 0 to 100m/s (burst)
• • Power supply: 10 ÷ 30Vdc (<5W @ 12VDC with heater)

DV-N Veleta de Precisión (Out: 10K potentiometer)

• • Potentiometric measurement of wind direction, precise and linear
• • Instrument according to standard WMO
• • Aluminum sturdy, compact and easy to install
• • Typical measuring range: 0 ÷ 359°
• • Resolution: 0.1°C, accuracy: 1°
• • Sensitivity <0.25 m/s
• • Low power consumption (<0.1 W; <5W@12VDC with heater)
• • High dynamic response to wind
• • Output signal: potentiometer (10K ohm)
• • Operating conditions: -30 ÷ +70°C, 0÷80m/s (burst)
• • Power supply: 10 ÷ 30Vdc

TMF100 Data Logger Multifuncional

• • Linux Datalogger completely programmable via web
• • 4 programmable analogical high-resolution inputs (24Bit)
• • 4 programmable analogical high-resolution inputs (12Bit)
• • 5 programmable frequency inputs up to 2000Hz/channel
• • 4 programmable ON/OFF or frequency outputs
• • 4 programmable 12Bit 0÷2Vdc analogical outputs
• • 2÷6 serial ports RS232, RS485, SDI, 2 USB, 1 lan Ethernet port 10/10Mbits
• • Internal memory from 32MB ÷ 2GB external removable memory (USB)
• • Wide display
• • New version with extremely low power consumption (< 0.2W in “low power” mode)
• • Integrated charge regulator up to 40Ah
• • Communication protocols: Modbus RTU & Tcp, SDI-12, TCP-IP, http, Ftp, Ntp, Telnet, Smtp
• • Data format: ASCII txt file, AES encripted, Synop, Metar, Speci

M2Ch 2-channel module, against electrical discharges

The module M2Ch is a useful accessory to Nesa's datalogger that allows you to connect any third-party sensor to the our acquisition systems. 

• • Two input channels with spring terminal
• • Double security level of the signal (gas diodes and varistors)
• • Ability to power the sensor with a line separate from the data logger
• • Ability to standardize the input signal to 0-2Vdc or 4 ÷ 20mA

PAL2A Mastil de 2 Metros

• 2m 

4 x CS05 Cable 5 metros Blindado para los Sensores y Data Logger

TMF-ALPS