STE-MAN View larger

STE-MAN 16 liter Manual Autoclave, class N standard

STE-MAN

MRC

New

MRC Sterilization Autoclaves are available as benchtop or vertical models, for laboratory, hospital, university, dental & clinical use. Available in sizes ranging from 1 liter, 8 liter, 16liter up to 300 liter.

Class B & Class N autoclaves

The class B autoclave has vacuum cycle. It is the highest class autoclave , which is conforming to the most stringent demands and therefore can be unrestrictedly used for sterilization of all possible loads for all kinds of sterilization the packaging (solid , hollow road type A and hollow road instruments with wrapped and unwrapped). A “class B" autoclave must in any case pass a Helix test as per EN 13060 by test body per EN 867-5:2001 According to expert opinion, that can only be achieved with According to expert opinion, that can only be achieved with Post vacuum drying provides complete drying of porous loads and hollow instruments at the end of the sterilization process.

The class N autoclave does not have vacuum cycle. If you only sterilize unwrapped non hollow instruments, you only need an autoclave capable of running class N cycles.

Add to wishlist

Chamber Dimensions (Inner DiameterXDepth) - 230x360mm
Trays - 2
Tray Dimensions - 192x285mm
Power - 1100VA
Sterilization Temperature - 121 / 134 Deg C
Voltage - 220-240VAC
Overall Dimensions - W605xH445xD400 mm
Net Weight - 30Kg
Holding Time - 121 Deg C/30min - 134 Deg C/10 min
Temperature & Pressure overload protection

30 other products in the same category: