Temperature

1
…
27
28
29
…
40

AO-FS1051 Temperature transducer with surface sensor and stainless steel sensor tip, Modbus RTU output

TRANSMITTERS AND TRANSDUCERS

AO-FS1051 Temperature transducer with surface sensor (-40 to + 400°C), Modbus RTU output

-40...+400°C 16 measuring ranges per device output 0-10 V, 4-20 mA DIP-switch-technology optional with LCD-Display protection type IP65 stainless steel contacting block

SI-121-SS Narrow Field of View Infrared Radiometer Sensor

SI-121-SS Narrow Field of View Infrared Radiometer Sensor 2

SENSORS & PROBES

SI-121-SS Narrow Field of View Infrared Radiometer Sensor

Apogee Instruments

The SI-121 is an unamplified analog sensor with a voltage output.The sensor has a 18° half-angle field of view and a response time of 0.6 seconds.Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface...

OMK610-TP Through Process Monitoring System for Food

OMK610-TP Through Process Monitoring System for Food 2

INSIDE & OUTSIDE USE

OMK610-NP Food Through Process Monitoring System

Grant Instruments

Through Process Monitoring: A comprehensive through process monitoring system designed for data logging in extreme environments. Sensor Probes not included. If you are heat treating products in your manufacturing process, you need to know that they have been exposed to the right temperature for the right amount of time in order to ensure consistent...

CMK610-S Concrete Maturity Meter

CMK610-S Concrete Maturity Meter 2

INSIDE & OUTSIDE USE

CMK610-S Concrete Maturity Meter

Grant Instruments

CMK610-S Concrete

Determining Concrete Maturity The Grant CMK610-S Concrete Maturity Meter is a compact unit, supplied in a very heavy duty, bright yellow water proof case, making it ideal for site work in all conditions and climates.

AO-KLT/A Air Duct quality sensor for mixed gas (VOC) and temperature

SENSORS & PROBES

AO-KLT/A Duct Air quality sensor for mixed gas (VOC) and temperature

Fuehler Systeme

0...100% mixed gas VOC Output Type : 0-10 V or 4-20 mA automatic re-calibration

View

OPTIONAL SENSORS

OPTIONAL SENSORS 2

SENSORS & PROBES

Probes-OQ610 Combination Temperature Probes for Oven OQ610

Grant Instruments

Combined Probes:◆ 3 Cable Lengths of each Model.◆ Can be used as a Magnetic Air Probe, Magnetic Surface Probe, Clamp Air Probe or Clamp Surface Probe.

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC)

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC) 2

SENSORS & PROBES

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC)

Grant Instruments

CLAMP AIR PROBE Grant manufactures a comprehensive range of robust, high quality temperature probes with a choice of sensor and in a variety of physical styles for use with Squirrel data loggers. In addition to the standard range of temperature probes Grant is able to customise probes for special applications. Grant is able to supply humidity probes and...

MF1921G iButton Temperature Logger, water resistant according to IPX8

INSIDE & OUTSIDE USE

DS1921-WP iButton Waterproof Temperature Logger Series according to IPX8

Thermochron iButtons labeled with “WP” (water-proof) are an enhanced version of the iButton® temperature loggers in terms of their protection level.These iButtons provide effective protection against moisture, various chemicals, and aresuitable for continuous submersion.The protection level complies with IPX8 according to DIN EN60529. See the DS1921G

SRH1A Humidity and Temperature Sensor SDI12

SRH1A Humidity and Temperature Sensor SDI12 2

SENSORS & PROBES

SRH1A Humidity and Temperature Sensor with SDI-12

The SRH1A Humidity and Temperature Sensor is a highly accurate and cost effective probe with robust POM-C enclosure. It has been prepared for outdoor and indoor environments. Can be used with Wind2measure RADIO Data Logger or integrated with other manufacturers’ equipment.

T3511P Web sensor - compressed air remote thermometer hygrometer with Ethernet interface

T3511P Web sensor - compressed air remote thermometer hygrometer with Ethernet interface 2

INSIDE & OUTSIDE USE

T3511P Web sensor - compressed air remote thermometer hygrometer with Ethernet interface

Humidity and temperature Transmitter, Humidity, temperature probe on a cable.T+RH probe made of hard anodized duralumin for compressed air measurements up to 25 bars on cable. The Measured values are also converted to other humidity interpretation data: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. The...

U3631M IoT Wireless T/Rel. Humidity Datalogger with connector for other temperature probes (built-in GSM modem)

U3631M IoT Wireless T/Rel. Humidity Datalogger with connector for other temperature probes (built-in GSM modem) 2

INSIDE & OUTSIDE USE

U3631M IoT T/Rel. Humidity GSM Datalogger with connector for other temp. probes

This GSM datalogger is designed to record the temperature and humidity from built-in sensors and temperature from an external probe.In case of exceeding the set limits, SMS and JSON messages can be sent out via a GPRS data connection.The measured values can be sent to the internet storage "COMET Cloud", which is a complete monitoring, alarm and analysis...

MF1921H iButton Temperature Logger, water resistant according to IPX8

MF1921H iButton Temperature Logger, water resistant according to IPX8 2

INSIDE & OUTSIDE USE

MF1921H iButton Temperature Logger (+15 to +46ºC, 2K), water resistant according to IPX8

Regarding the protection class, the MF1921H is an improved version of the DS1921H Temperature Logger iButton.

Showing 325-336 of 469 item(s)

1
…
27
28
29
…
40

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow